PWA 3: Dark of the Lounge

[bhall82]

Originally Posted by Shardik2SS

I have a little more hair than that and look better too.

hahaha I was kidding you know that

[WadeWilson]

Originally Posted by bhall82

hahaha I was kidding you know that

[Mysteek]

MAFIA GAME ON!!

http://www.camaro5.com/forums/showthread.php?t=198115

[BowtieBelle]

Hmmm.... OK, my only thing is with that sealant... that's not for use every time I detail the car... and I generally don't have the time to let it cure for 45 minutes. (I'm talking about the Gray Adams stuff, Machine Super something or other). I think maybe I should get that stuff that buffs out moderate swirl marks, then the brilliant glaze and the buttery wax. Can I use the glaze and buttery wax with my orbital?

[WadeWilson]

Originally Posted by BowtieBelle

Hmmm.... OK, my only thing is with that sealant... that's not for use every time I detail the car... and I generally don't have the time to let it cure for 45 minutes. (I'm talking about the Gray Adams stuff, Machine Super something or other). I think maybe I should get that stuff that buffs out moderate swirl marks, then the brilliant glaze and the buttery wax. Can I use the glaze and buttery wax with my orbital?

This is what I do when I use my porter cable polisher. I put the swirl/haze remover on first followed by the polish and I finish with the Super Wax. If I have time I then put a coat of the Brilliant Glaze on by hand. I don't know if you can use the porter cable with it or not. I just apply and remove it by hand since the video shows it being applied in this manner.

You should also invest in a clay bar and clay your car at least twice a year. I will clay mine every 4 months when I do the whole polish/wax deal.

[BowtieBelle]

Maybe this: http://www.adamspolishes.com/p-667-a...sh-bundle.aspx

and then the buttery wax?

Do I NEED to put wax on top of that fine machine polish or would that polish be the final step and the wax unnecessary?

[Mysteek]

[BowtieBelle]

Bah, screw it. I'm buying it all. Nick + Jaren = bad influence

[Mysteek]

It's definitely *pinches her nose and sings nasally* Friday, Friday, Friday!!

Man, I can't wait until I can at least slam back a few beers after work.

[BowtieBelle]

Originally Posted by Mysteek

It's definitely *pinches her nose and sings nasally* Friday, Friday, Friday!!

Man, I can't wait until I can at least slam back a few beers after work.

THIS. I gotta go get pretty, formal dinner party in two hours!


Later kids!

[WadeWilson]

Originally Posted by BowtieBelle

Maybe this: http://www.adamspolishes.com/p-667-a...sh-bundle.aspx

and then the buttery wax?

Do I NEED to put wax on top of that fine machine polish or would that polish be the final step and the wax unnecessary?

You won't need the severe swirl remover unless you have some serious spots on your car. You don't have to put the wax on after the polish, but it is recommended for a deeper shine.

This is what I have and these are the steps I follow with exception of the first step, and as I said before, sometimes I had a coat of Brilliant Glaze when it's all said and done.

http://www.adamspolishes.com/p-338-a...isher-kit.aspx

[Mysteek]

Originally Posted by BowtieBelle

THIS. I gotta go get pretty, formal dinner party in two hours!


Later kids!

have fun!! BYA!!

[SWAT]

Originally Posted by BowtieBelle

THIS. I gotta go get pretty, formal dinner party in two hours!


Later kids!

Have fun

[bossbunny]

Originally Posted by Shardik2SS

Check these vids out, and decide which would be better for you.

I thought brilliant glaze was with the grey pad? Guh I need to go buy a white pad asap.