Shifter Centering springs on v6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Frankieboy · 06-05-2021, 05:31 PM

Hello. I wanted to share this hurst install with y’all!! This is how I dealt with the shifter centering springs on the v6 . I took the 10mm bolts off the dust boot and removed it from the top. Then you can take those pesky springs out! I was able to change this out in about three hours. I did install the springs back in too. Very nice shifter. It made a big difference.

joekono · 06-07-2021, 01:37 AM

Looks good!!!

06-05-2021, 05:31 PM	#1
Frankieboy Drives: 2011 synergy camaro lt Join Date: Feb 2021 Location: South Carolina Posts: 34	Shifter Centering springs on v6 Hello. I wanted to share this hurst install with y’all!! This is how I dealt with the shifter centering springs on the v6 . I took the 10mm bolts off the dust boot and removed it from the top. Then you can take those pesky springs out! I was able to change this out in about three hours. I did install the springs back in too. Very nice shifter. It made a big difference. Attached Images Last edited by Frankieboy; 06-05-2021 at 05:55 PM.

06-07-2021, 01:37 AM	#2
joekono Drives: Camaro Convertible 2014 1LT Join Date: May 2019 Location: New Jersey Posts: 1,015 View My Garage	Looks good!!! __________________