Local shop Rock Hill SC - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

500rwhp · 02-22-2016, 02:26 PM

Looking for a local shop that can install some suspension stuff for me. I am aware of JHR and PCM but there in Mooresville NC.. anyone know of a shop around rock hill SC...does good work and prices are reasonable..

BearZL1 · 02-25-2016, 06:39 AM

I would recommend Ricky at Steve Moore Chevrolet. He's very good. I know it's not Rock Hill but they're not far.

500rwhp · 02-25-2016, 07:06 AM

Yeah but they dealer prices rip me off....

Sent from my SM-G928T using Tapatalk

500rwhp · 02-25-2016, 07:06 AM

I go there for my free oil changes lol

Sent from my SM-G928T using Tapatalk

500rwhp · 03-03-2016, 02:21 PM

still in search of a good shop (not dealer) to get some work done...Charlotte area or Rock Hill SC>

Rando73 · 03-03-2016, 05:19 PM

Quote:

Originally Posted by 500rwhp

still in search of a good shop (not dealer) to get some work done...Charlotte area or Rock Hill SC>

I'm going to talk to Ricky at Steve Moore on Saturday. I need to have my supercharger replaced and I have several parts that need to be installed. I'll let you know how reasonable he is.

500rwhp · 03-16-2016, 03:11 PM

any luck with steve moore?

Rando73 · 03-16-2016, 07:14 PM

Quote:

Originally Posted by 500rwhp

any luck with steve moore?

She goes under the wrench tomorrow. Ricky is going to install my injectors and balancer/lower pulley and load the tune for 2 hours labor. The supercharger is being replaced under warranty.

500rwhp · 03-16-2016, 07:28 PM

How much per hour?

Sent from my SM-G928T using Tapatalk

Rando73 · 03-16-2016, 07:29 PM

Quote:

Originally Posted by 500rwhp

How much per hour?

Sent from my SM-G928T using Tapatalk

$100

500rwhp · 03-16-2016, 07:30 PM

U think they wud do my toe rods control arms and Springs and axels?

Sent from my SM-G928T using Tapatalk

Rando73 · 03-16-2016, 07:43 PM

Quote:

Originally Posted by 500rwhp

U think they wud do my toe rods control arms and Springs and axels?

Sent from my SM-G928T using Tapatalk

I can ask for you tomorrow.

BearZL1 · 03-16-2016, 07:45 PM

Quote:

Originally Posted by 500rwhp

U think they wud do my toe rods control arms and Springs and axels?

Sent from my SM-G928T using Tapatalk

Yes. Call and ask for Jim Guido in service and tell him Barry and Randy recommend Ricky do your car. They are reasonable and good.

500rwhp · 03-16-2016, 07:46 PM

Quote:

Originally Posted by Rando73

I can ask for you tomorrow.

Let me no for sure!!

Sent from my SM-G928T using Tapatalk

02-22-2016, 02:26 PM	#1
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	Local shop Rock Hill SC Looking for a local shop that can install some suspension stuff for me. I am aware of JHR and PCM but there in Mooresville NC.. anyone know of a shop around rock hill SC...does good work and prices are reasonable..

02-25-2016, 07:06 AM	#3
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	Yeah but they dealer prices rip me off.... Sent from my SM-G928T using Tapatalk __________________ FOUNDER - NY/NJ/PA Domestic Car Club Est.2013 Custom Grind Comp Cam 114 Lobe * Brian Tooley Push Rods, Springs * Kooks 1 7/8 LT Headers * Comp Cam Trunion Bearings * NGK TR55 Spark Plugs * Rotofab CAI * Dyno Tune * GM Performance Dual Mode Exhaust * GForce 1000 HP Axels* BMR 1" Lowering Springs, Trailing Arms, Toe Rods, Upper Control Arms* Full Rear Bushing Kit * 500/441

02-25-2016, 07:06 AM	#4
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	I go there for my free oil changes lol Sent from my SM-G928T using Tapatalk __________________ FOUNDER - NY/NJ/PA Domestic Car Club Est.2013 Custom Grind Comp Cam 114 Lobe * Brian Tooley Push Rods, Springs * Kooks 1 7/8 LT Headers * Comp Cam Trunion Bearings * NGK TR55 Spark Plugs * Rotofab CAI * Dyno Tune * GM Performance Dual Mode Exhaust * GForce 1000 HP Axels* BMR 1" Lowering Springs, Trailing Arms, Toe Rods, Upper Control Arms* Full Rear Bushing Kit * 500/441

03-16-2016, 07:28 PM	#9
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	How much per hour? Sent from my SM-G928T using Tapatalk __________________ FOUNDER - NY/NJ/PA Domestic Car Club Est.2013 Custom Grind Comp Cam 114 Lobe * Brian Tooley Push Rods, Springs * Kooks 1 7/8 LT Headers * Comp Cam Trunion Bearings * NGK TR55 Spark Plugs * Rotofab CAI * Dyno Tune * GM Performance Dual Mode Exhaust * GForce 1000 HP Axels* BMR 1" Lowering Springs, Trailing Arms, Toe Rods, Upper Control Arms* Full Rear Bushing Kit * 500/441

03-16-2016, 07:30 PM	#11
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	U think they wud do my toe rods control arms and Springs and axels? Sent from my SM-G928T using Tapatalk __________________ FOUNDER - NY/NJ/PA Domestic Car Club Est.2013 Custom Grind Comp Cam 114 Lobe * Brian Tooley Push Rods, Springs * Kooks 1 7/8 LT Headers * Comp Cam Trunion Bearings * NGK TR55 Spark Plugs * Rotofab CAI * Dyno Tune * GM Performance Dual Mode Exhaust * GForce 1000 HP Axels* BMR 1" Lowering Springs, Trailing Arms, Toe Rods, Upper Control Arms* Full Rear Bushing Kit * 500/441

02-25-2016, 06:39 AM	#2
BearZL1 Drives: 2013 ZL1 auto Join Date: Nov 2015 Location: Charlotte NC Posts: 55	I would recommend Ricky at Steve Moore Chevrolet. He's very good. I know it's not Rock Hill but they're not far.

03-03-2016, 02:21 PM	#5
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	still in search of a good shop (not dealer) to get some work done...Charlotte area or Rock Hill SC>

03-16-2016, 03:11 PM	#7
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	any luck with steve moore?