05-02-2015, 01:37 AM | #1 |
Wtb ZL1 spoiler brake light harness
Looking for the gen 5 diy wiring harness to hookup a ZL1 spoiler brake light to my current SS set up.
|
|
05-06-2015, 02:26 AM | #2 |
Bump
|
|
05-06-2015, 03:33 PM | #3 |
Drives: 2011 SS2 inferno orange Join Date: Nov 2013
Location: CA
Posts: 184
|
I just spliced mine in into the brake light took me 20 min to do it all
|
05-06-2015, 05:28 PM | #4 |
You mean into the existing 3rd brake light ?
|
|
05-12-2015, 10:14 AM | #5 |
|
I did the same, spliced into stock harness before the plug and unplugged the stock light
__________________
2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights
'98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars '94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A -- >> Some of my Projects My Fquick Page |
07-12-2015, 10:11 AM | #6 |
Drives: 2012 chevy camaro ls Join Date: Jan 2015
Location: fortmyers
Posts: 100
|
so im having trouble with my ebay zl1 spoiler. I spliced the connecter behind the panel on the passenger side(from what I read is the third brake light) positive to white wire and the to the black wire. but its not working . not experienced with this can someone tell me what im doing wrong? or what the problem might be?
|
07-12-2015, 12:50 PM | #7 |
Drives: 2011 Camaro 2SS/RS Join Date: Sep 2012
Location: Oxnard
Posts: 156
|
You connecting both the spoiler wires on one of the wires on the harness?
|
07-12-2015, 10:22 PM | #8 |
Drives: 2012 chevy camaro ls Join Date: Jan 2015
Location: fortmyers
Posts: 100
|
no both on separate one to white other to black I also tried positive to whit and then a ground but that didn't work either
|
07-14-2015, 03:14 PM | #9 |
Drives: 2013-ZL1 Join Date: May 2015
Location: Florida
Posts: 4
|
|
08-12-2015, 07:08 AM | #10 |
Drives: GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,292
|
How do you get to the wiring for the third brake light in the rear window? Seems like a pain of taking interior paneling out just to get the package shelf panel out. Just wanted to know how you guys got to the wiring and spliced in at.
__________________
2020 GMC Sierra AT4 6.2L
WTB - 2010 Camaro 1SS or 2SS, Aqua Blue Metallic, A6 |
|
|
|
|