|
|
#99 |
|
36.58625, -121.7568
|
What he said^
|
|
|
|
|
|
#100 |
|
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Well the Caddy is now out of the box and since this is the Camaro site it seems perfectly logical to to extrapolate what the next ZL1 will look like since the last ZL1 came one year after the gen 2 CTS-V. For all of the guys saying it will not make any more power than a vette, I say bologna... That is like saying a challanger will never make more power than a viper... times are changing. The writing is on the wall for a new mid engine vette... in the interim the ZL1 may be the top dog for power in the GM line-up. I think this would be a very smart move for GM... just my opinion.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. ![]() |
|
|
|
|
|
#101 |
![]() Drives: Corvette C5 Join Date: Feb 2014
Location: United States
Posts: 177
|
Exhaust Sounds mean.
![]() from the article: It was recorded by the Car&Driver magazine crew during the CTS-V reveal event in an enclosed space. While it's only a few seconds long, the audio sampler gives us an idea of what to expect when the car makes its full video debut in the coming days or weeks. 8 pictures and video in the gallery . |
|
|
|
|
|
#102 | ||
|
Account Suspended
Drives: '14 RRM 1LT/RS A6 Join Date: Mar 2009
Location: MA
Posts: 2,065
|
Quote:
Quote:
Nice post. I love the BMW's engine bay. |
||
|
|
|
|
|
#103 |
![]() ![]() ![]() ![]() Drives: 99z28 with bolt-ons and a mwc fab 9 Join Date: Jul 2012
Location: Florida
Posts: 1,277
|
Surprised nobody has really touched on the weight loss compared to the outgoing model.
__________________
I like my woman like my milk shakes, THICK!!!!
|
|
|
|
|
|
#104 |
|
Iron fist, lead foot
Drives: 2003 Mustang Cobra Join Date: Jul 2013
Location: Wyoming
Posts: 1,243
|
It was mentioned a bit in a thread on camaro6. The New one comes in at 4145lb per the release, while the outgoing model was/is something like 4204 or 4220lbs. That gives you a loss of 59-75lbs, which is a 1.4-1.8% loss.
__________________
'03 SVT Cobra-SC4.6L V8 || modded with mods'n'stuff
|
|
|
|
|
|
#105 |
|
1st Civ. Div.
Drives: Camaroless for now...RIP "Big SexZ" Join Date: Dec 2007
Location: Savannah, Ga
Posts: 2,729
|
That is a nice savings especially since the new car is much larger in actual size to truly compete with the E class and 5 series with the old car being more of a tweener in size.
__________________
Swift....Silent....Deadly
|
|
|
|
|
|
#106 |
![]() ![]() ![]() ![]() ![]() |
The automatic equipped V2 sedan weighs 4,253lbs according to Cadillac specs. So a little over 100lb weight loss while adding 90hp/80lb-ft, more head and leg room up front, stiffer chassis, bigger brakes, wheels, tires. A great feat considering the competitors in this class have less power and weigh 200-400lb more.
|
|
|
|
|
|
#107 |
![]() ![]() ![]() ![]() Drives: 2015 Blue Velvet Metallic ZL1 Join Date: Nov 2013
Location: Orlando & Flagler Beach,FL
Posts: 1,453
|
Hope to heck that GM put the SC LT4 in the 2016 ZL1.
|
|
|
|
|
|
#108 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: Current Camaro-less Join Date: Jul 2014
Location: Oregon
Posts: 3,241
|
|
|
|
|
|
|
#109 |
![]() ![]() ![]() ![]() Drives: 99z28 with bolt-ons and a mwc fab 9 Join Date: Jul 2012
Location: Florida
Posts: 1,277
|
Hopefully by then it has a better blower.
__________________
I like my woman like my milk shakes, THICK!!!!
|
|
|
|
|
|
#110 | ||
![]() ![]() ![]() Drives: CTS-V Join Date: Aug 2008
Location: Raleigh NC
Posts: 1,069
|
Quote:
Quote:
__________________
|
||
|
|
|
|
|
#111 | |
![]() ![]() ![]() ![]() Drives: 2010 2SS, 2011 Buick Regal Turbo Join Date: Mar 2009
Location: Nashville, Tennessee
Posts: 1,392
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() (For this demonstration unit, the welded aluminum stampings of the sheer plate are polished. You won’t find that on the showroom floor, but this large structural element stiffens the bodywork substantially, and helps resist cornering forces for improved handling and steering feel. The central forward mounted portion is shared with ATS-V, which gets shorter arms reaching back to pick up the sills. Lesser CTS and ATS models get no such plate, though a steel bar mounts roughly where you see the square bar that passes just behind the engine oil pan.) ![]() (This aluminum strut tower brace works in conjunction with the sheer plate and some further bracing that triangulates the frame rails to the radiator support to greatly increase the body structure’s torsional rigidity.) ![]() (There is a whole lotta cooling going on up front. Air that flows through the transmission cooler exits here. The cooled transmission fluid flows first to the e-Diff, then heads back to the 8L90 transmission.) ![]() (The transmission case and the tail-shaft are unique for this front-mounted CTS-V application, but everything inside is shared with the latest Corvette transaxle. This transmission is 28 pounds lighter than its six-speed predecessor.) ![]() (Like the transmission, the internals of the electronically controlled locking rear differential are shared with the Corvette, but the programming is optimized for the very different handling characteristics of this much larger sedan.) ![]() (Here you can see the cooling lines running just outboard of the exhaust pipes back to the electronic differential.) ![]() (The big outboard openings in the lower fascia each house an auxiliary radiator. This one on the left adds a bit more capacity to the intercooler circuit, the one on the right cools an extra engine-coolant heat exchanger.) ![]() (The large grille you see here exhausts hot air from the auxiliary engine-coolant radiator, while the small high-velocity duct routes high-pressure cool air from the fascia-mounted brake duct at a deflector panel that sends it onto the rotor.) ![]() (The little “air fence” shown here helps route air around the tire for reduced drag. This piece is eliminated with purchase of the carbon package, as the extended chin splitter that comes with that option does the job.) 2016 Cadillac CTS-V First Look Ultra-High-Strength-Steel Fist in a Velvet Glove Quote:
__________________
![]() |
|
|
|
|
|
|
#112 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '16 C7 Z51 Join Date: May 2012
Location: Redmond, WA
Posts: 3,056
|
Awesome article!
__________________
'16 Corvette C7 Z51 1LT (Build Thread)
'14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD |
|
|
|
![]() |
|
|