PWA "The Lounge" - Page 3508

68 Z/28 · 08-20-2009, 07:02 PM

Quote:

Originally Posted by MisterCamaro69

Waddup Zee... these noobz are showin you up

Who where

68 Z/28 · 08-20-2009, 07:05 PM

Quote:

Originally Posted by WildClay

There was a day when that was true, but over the years I think that rep is getting tarnished, 3 times in the last two weeks we have had traffic jams becasue a truck got stuck under an overpass.

There are always some bad apples but for the most part , I think they are the best , that being said though I think the laws need to be changed so they can drive less hrs. at a time

68 Z/28 · 08-20-2009, 07:06 PM

Quote:

Originally Posted by WildClay

I lost a windshield last year from that but it turned out the be a blessing, my old windshild was sort of pitted from road grit and the new one looks great. I thought for sure it would be hit with my insurance deductable, but to my surprise, with my policy there is no deductable for that kind of damage. Did not make sense to me, but I sure as heck was not going to question it.

The guy who replaced, in the parking lot at work, was like watching an artist, he did it inside 30 minutes, year later, still no leaks or issues.

WildClay · 08-20-2009, 07:08 PM

[QUOTE=68 Z/28;823654[/QUOTE]

BTW -- I checked out the Halo's for my car, found the perfect ones from AAC and a great guy that works there that answered more questions then I would for anyone, was about to buy them when I found out what it took to replace them.

You have to take out the L/R fender wells to get at the bumper bolts, then remove the front bumper, the the HL assembly, then put it in the oven at 200F and hope the glue softens enough to take the lense cover off without breaking it, then install them and reassemble half the front end of your car.

Glad I found out first, so now will be making sure I can find a dealer shop willing to do it and buy the completed assembly so they don't have to deal with the oven part...

In any event, thanks for that tip, they have the complete assemblies so all I need to do is find a GM shop willing to do it.

*CamaroSpike23* · 08-20-2009, 07:08 PM

10,001

http://www.camaro5.com/forums/showth...665#post823665

Gentry78 · 08-20-2009, 07:09 PM

Quote:

Originally Posted by 68 Z/28

There are always some bad apples but for the most part , I think they are the best , that being said though I think the laws need to be changed so they can drive less hrs. at a time

i wouldn't tell some of them that lol some want more or just more money

ljustin293 · 08-20-2009, 07:10 PM

Quote:

Originally Posted by CamaroSpike23

10,001

http://www.camaro5.com/forums/showth...665#post823665

5,001

*CamaroSpike23* · 08-20-2009, 07:12 PM

Quote:

Originally Posted by ljustin293

5,001

lol

10,002

Mr Twisty · 08-20-2009, 07:13 PM

Quote:

Originally Posted by 68 Z/28

There are always some bad apples but for the most part , I think they are the best , that being said though I think the laws need to be changed so they can drive less hrs. at a time

They have changed in the last couple of years... Now if we can do something about folks that don't know what an acceleration lane is... anyone wanna venture a guess?

ljustin293 · 08-20-2009, 07:15 PM

Quote:

Originally Posted by CamaroSpike23

lol

10,002

5,002

timing...we have it

ShnOmac · 08-20-2009, 07:15 PM

Silly whores.....

68 Z/28 · 08-20-2009, 07:15 PM

Quote:

Originally Posted by WildClay

BTW -- I checked out the Halo's for my car, found the perfect ones from AAC and a great guy that works there that answered more questions then I would for anyone, was about to buy them when I found out what it took to replace them.

You have to take out the L/R fender wells to get at the bumper bolts, then remove the front bumper, the the HL assembly, then put it in the oven at 200F and hope the glue softens enough to take the lense cover off without breaking it, then install them and reassemble half the front end of your car.

Glad I found out first, so now will be making sure I can find a dealer shop willing to do it and buy the completed assembly so they don't have to deal with the oven part...

In any event, thanks for that tip, they have the complete assemblies so all I need to do is find a GM shop willing to do it.

and your welcome

68 Z/28 · 08-20-2009, 07:16 PM

Quote:

Originally Posted by CamaroSpike23

10,001

http://www.camaro5.com/forums/showth...665#post823665

Grats

68 Z/28 · 08-20-2009, 07:17 PM

Quote:

Originally Posted by ljustin293

5,001

Grats

08-20-2009, 07:08 PM	#49102
WildClay Drives: 2010 Camaro 2LT Join Date: Aug 2009 Location: NJ Posts: 669	[QUOTE=68 Z/28;823654[/QUOTE] BTW -- I checked out the Halo's for my car, found the perfect ones from AAC and a great guy that works there that answered more questions then I would for anyone, was about to buy them when I found out what it took to replace them. You have to take out the L/R fender wells to get at the bumper bolts, then remove the front bumper, the the HL assembly, then put it in the oven at 200F and hope the glue softens enough to take the lense cover off without breaking it, then install them and reassemble half the front end of your car. Glad I found out first, so now will be making sure I can find a dealer shop willing to do it and buy the completed assembly so they don't have to deal with the oven part... In any event, thanks for that tip, they have the complete assemblies so all I need to do is find a GM shop willing to do it. __________________ 2LT / Aqua Blue / Auto / Sun Roof / Hockey Stripe 1100 - 4/11/9 - Order Placed at Dealer 3000 - 8/12/9 - TPW - 9/7/9 3800 - 9/9/9 - Produced 5000 - 9/16/9 - Delivered to Dealer 6000 - 9/17/9 - Delivered to Customer Many Thanks to CamaroScotty and a friend at GM!! Dealer and GM Customer Service at its best!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LOUNGE Forum	camaro5	Site Related Announcements / Suggestions / Feedback / Questions	37	01-04-2009 09:29 PM

08-20-2009, 07:15 PM	#49109
ShnOmac Drives: 2006 Silverado SS, 2009 G8 GT Join Date: Aug 2008 Location: PNW Posts: 13,313	Silly whores.....