Rogers Exhaust in Fontana, CA - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DP Valentino · 01-07-2015, 12:16 AM

I want to thank Roger's Exhaust in Fontana, CA for installing my Doug Thorley Shorty Headers! Good service by a group of cool mechanics! Will be having them do any future exhaust work for me when I need it! Here is a picture of the headers!

KeyWil · 01-07-2015, 11:24 AM

Nicccce! I'm digging it

. Don't mean to poke in your business like this

, but how much was the install? Also, what changes have you noticed since installing them? I may end up doing the same once my warranty is up on my girl. Thanks for any info man.

DP Valentino · 01-07-2015, 01:40 PM

Quote:

Originally Posted by KeyWil

Nicccce! I'm digging it

. Don't mean to poke in your business like this

, but how much was the install? Also, what changes have you noticed since installing them? I may end up doing the same once my warranty is up on my girl. Thanks for any info man.

They charged me $440 to install due to the fact that the headers didn't have flanges and they had to custom the headers to just only bolt-on to my Cats so if I decide to go High-Flow all I have to do is un-bolt them! I noticed a better breathing difference when I accelerate. Plus it makes my exhaust sound louder also. Shorties do help your car in my opinion!

KeyWil · 01-07-2015, 04:15 PM

Cool! Thanks for the response man. Sounds like a decent price for the install as well. Enjoy brutha!

mark1 · 01-07-2015, 08:36 PM

Quote:

Originally Posted by DP Valentino

They charged me $440 to install due to the fact that the headers didn't have flanges and they had to custom the headers to just only bolt-on to my Cats so if I decide to go High-Flow all I have to do is un-bolt them! I noticed a better breathing difference when I accelerate. Plus it makes my exhaust sound louder also. Shorties do help your car in my opinion!

what do mean that dont have flanges? I thought these were direct bolt on product?

mark1 · 01-07-2015, 10:33 PM

Quote:

Originally Posted by CreativeDawn

I got the same HEADERS installed on my Camaro too! Now I was told that DT Shorty's are California LEGAL now....but what's the CARB NUMBER?

how was your install? did you have to put on custom flanges?

DP Valentino · 01-08-2015, 02:33 AM

Quote:

Originally Posted by mark1

what do mean that dont have flanges? I thought these were direct bolt on product?

The V8 Shorties from Doug Thorley is direct bolt on. Not the V6 Version of the shorties. They needed to be welded on. When they tried to weld them on, it came up short due to where the headers would be positioned. So they custom installed them for me where I can do a bolt on switch if I decide to put high-flow cats on. Win-Win for me!

DP Valentino · 01-08-2015, 02:36 AM

Quote:

Originally Posted by CreativeDawn

I got the same HEADERS installed on my Camaro too! Now I was told that DT Shorty's are California LEGAL now....but what's the CARB NUMBER?

It's stamped on the headers! Look at the driver side header!

Bluffen · 01-08-2015, 02:32 PM

Roger and his brother Sparky, yes Sparky are the best in the Biz. I have highly recommended all my Camaro friends to get their upgrades done there. Their prices are beyond reasonable.

caper · 01-09-2015, 11:33 AM

agreed. i was the first C5 they worked on, and ive been back numerous times for exhaust changes.

cornerspeed92 · 01-09-2015, 02:44 PM

Agreed, they have worked on both of my Camaro's. Most recently installing high flow cats, and couldn't be happier with the sound

01-07-2015, 12:16 AM	#1
DP Valentino Drives: 2010 CGM Chevrolet Camaro LS Join Date: Feb 2014 Location: St. Louis, MO Posts: 510	Rogers Exhaust in Fontana, CA I want to thank Roger's Exhaust in Fontana, CA for installing my Doug Thorley Shorty Headers! Good service by a group of cool mechanics! Will be having them do any future exhaust work for me when I need it! Here is a picture of the headers! Attached Images __________________ 2010 Chevrolet Camaro CGM LS - Performance Mods: "Everything I can get bolt-on wise to make it run good!" Exterior Mods: "Everything I can get to make it look good!" Interior Mods: "Everything I can get to make it look good!"

01-08-2015, 02:32 PM	#9
Bluffen Drives: 2013 Sea Ray 220 Sundeck Join Date: Apr 2011 Location: Fontana Posts: 1,138	Roger and his brother Sparky, yes Sparky are the best in the Biz. I have highly recommended all my Camaro friends to get their upgrades done there. Their prices are beyond reasonable. __________________ *It's not who you are underneath but what you DO that defines you*

01-09-2015, 11:33 AM	#10
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,545	agreed. i was the first C5 they worked on, and ive been back numerous times for exhaust changes. __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

01-09-2015, 02:44 PM	#11
cornerspeed92 Drives: 2013 1SS 1LE Join Date: Jul 2012 Location: Colorado Posts: 4,188 View My Garage	Agreed, they have worked on both of my Camaro's. Most recently installing high flow cats, and couldn't be happier with the sound __________________

01-07-2015, 11:24 AM	#2
KeyWil Drives: 2011 Blk 1LS A6 Join Date: Mar 2014 Location: Orange, Ca Posts: 269	Nicccce! I'm digging it . Don't mean to poke in your business like this , but how much was the install? Also, what changes have you noticed since installing them? I may end up doing the same once my warranty is up on my girl. Thanks for any info man.

01-07-2015, 04:15 PM	#4
KeyWil Drives: 2011 Blk 1LS A6 Join Date: Mar 2014 Location: Orange, Ca Posts: 269	Cool! Thanks for the response man. Sounds like a decent price for the install as well. Enjoy brutha!