What Did You Do To Your Camaro Today? - Page 708 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mvp_Me · 01-31-2014, 11:53 PM

Quote:

Originally Posted by 2fullgarage

Added the Phastek Gauge pack and Renin carbon fiber interior..painted my door panels while I was in there

I have the same seat covers but in black and red

KingofBattle · 02-01-2014, 12:15 AM

Installed a 1LE Suede Steering wheel!

scoticus.rex · 02-01-2014, 03:22 PM

Installed an RX Catch Can, RX 1LE Separator, and a VNC Ported Throttle Body (All three in Inferno Orange) today. Tip of the day on installing the catch can. It is much easier to get to the ports for the intake and output hoses with the throttle body removed. I took the RX logo off the 1LE separator since it was facing the wrong direction once it was installed and that annoyed me. Otherwise, install went pretty well across the board.

I think I might order another nylon braided hose to replace the one going from the 1LE Separator and the CAI just so it will match the other two hoses from the catch can.

Ryanbabz71 · 02-01-2014, 03:50 PM

Put in my trunk organizer bag.

Ryan

Angrybird 12 · 02-01-2014, 04:05 PM

Just a couple days ago it was sitting under a layer of snow and the temperature was -4F, today it was 67F and sunny so I put the top down and drove it.

Aequitas & Veritas · 02-01-2014, 04:20 PM

Installing some gill stripes

layzurguy · 02-01-2014, 04:46 PM

Pulled it out of the garage, cleaned the garage, and pulled it back in.

USCAMARO14 · 02-01-2014, 05:01 PM

I got the hood and trunk stripe done, and overlay on front and back bow tie.
It's a little dirty right now.

kosmo · 02-01-2014, 07:50 PM

Took the cover off long enough to add a few minor additions.

Angrybird 12 · 02-01-2014, 07:55 PM

Quote:

Originally Posted by kosmo

Took the cover off long enough to add a few minor additions.

Nice, I especially like the shifter and the painted fuel door, looks much better than the chrome or aluminum colored ones.

tramtwo · 02-01-2014, 07:59 PM

10 hours... wash, decon, clay, cut, polish, seal, and wax. Finished in the dark photos to follow.

swizlstik · 02-01-2014, 08:33 PM

Quote:

Originally Posted by tramtwo

10 hours... wash, decon, clay, cut, polish, seal, and wax. Finished in the dark photos to follow.

Can't wait to see them. I bet that crystal red pops!!

RubyCamaro · 02-01-2014, 08:57 PM

Took her along with her garage mate on a nice country cruise and did a little photo shoot: (more pics & videos on my build thread)

mickmosh · 02-01-2014, 09:33 PM

Me and buddy installed some bmr Rear Trailing Arms, Rear Toe Rods, Rear Suspension Bushing Kit, Rear Cradle Full Bushing . We didn't get to install the Rear Upper Control Arm Bushing. All in all it was a good day...

02-01-2014, 12:15 AM	#9900
KingofBattle Drives: 2011 Camaro 2SS Join Date: Apr 2012 Location: IL/ near STL United States Posts: 191 View My Garage	Installed a 1LE Suede Steering wheel! Attached Images __________________

02-01-2014, 03:22 PM	#9901
scoticus.rex LTC, USA Drives: Hobbes - 2013 Camaro 2SS RS M6 Join Date: Sep 2013 Location: Northern Virginia Posts: 419 View My Garage	Installed an RX Catch Can, RX 1LE Separator, and a VNC Ported Throttle Body (All three in Inferno Orange) today. Tip of the day on installing the catch can. It is much easier to get to the ports for the intake and output hoses with the throttle body removed. I took the RX logo off the 1LE separator since it was facing the wrong direction once it was installed and that annoyed me. Otherwise, install went pretty well across the board. I think I might order another nylon braided hose to replace the one going from the 1LE Separator and the CAI just so it will match the other two hoses from the catch can. __________________ _____________________________________ ~Rex Hobbes - 2013 Camaro 2SS RS M6

02-01-2014, 03:50 PM	#9902
Ryanbabz71 Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,231 View My Garage	Put in my trunk organizer bag. Ryan __________________ Ryan * 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680

02-01-2014, 04:05 PM	#9903
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	Just a couple days ago it was sitting under a layer of snow and the temperature was -4F, today it was 67F and sunny so I put the top down and drove it. __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

02-01-2014, 04:20 PM	#9904
Aequitas & Veritas Drives: 2010 Camaro 2LT RS, 2009 GTR Join Date: May 2009 Location: Kansas Posts: 2,559 View My Garage	Installing some gill stripes __________________ Build thread: http://www.camaro5.com/forums/showthread.php?t=152335 Photos: www.flickr.com/bradbeer GTR Instagram: @NoCrustGTR

02-01-2014, 04:46 PM	#9905
layzurguy Ride On!!!! Drives: 2012 SS Ragtop Join Date: May 2012 Location: Race City USA Posts: 605 View My Garage	Pulled it out of the garage, cleaned the garage, and pulled it back in. __________________

02-01-2014, 05:01 PM	#9906
USCAMARO14 Drives: 2LS 2014 Join Date: Oct 2013 Location: Staten ISland Posts: 3,404	What I did today I got the hood and trunk stripe done, and overlay on front and back bow tie. It's a little dirty right now. __________________

02-01-2014, 07:50 PM	#9907
kosmo Finally Satisfied Drives: 2017 Hyper Blue 2SS M6 Join Date: Nov 2009 Location: St. Marys, OH Posts: 533 View My Garage	Took the cover off long enough to add a few minor additions. Attached Images

02-01-2014, 07:59 PM	#9909
tramtwo Drives: 2021 1LE Join Date: Jul 2011 Location: N'Awlinz Posts: 6,315	10 hours... wash, decon, clay, cut, polish, seal, and wax. Finished in the dark photos to follow.

02-01-2014, 08:57 PM	#9911
RubyCamaro Jan Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010 Location: Springfield, TN Posts: 16,225 View My Garage	Took her along with her garage mate on a nice country cruise and did a little photo shoot: (more pics & videos on my build thread) __________________

02-01-2014, 09:33 PM	#9912
mickmosh Drives: 2018 Camaro ZL1 Join Date: Nov 2012 Location: Melbourne Fl Posts: 57 View My Garage	Me and buddy installed some bmr Rear Trailing Arms, Rear Toe Rods, Rear Suspension Bushing Kit, Rear Cradle Full Bushing . We didn't get to install the Rear Upper Control Arm Bushing. All in all it was a good day...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM