The V6 Lounge

[menendez1293]

Originally Posted by PoorMansCamaro

i'm an asshole

http://www.camaro5.com/forums/showthread.php?t=309450

[pgustavson]

Originally Posted by PoorMansCamaro

i'm an asshole

http://www.camaro5.com/forums/showthread.php?t=309450

[pgustavson]

Originally Posted by menendez1293

Yea i was considering their 1LE style separator until all the recent things went down. I think now I'm either gonna leave the clean side stock or get the GM 1LE separator. Not quite sire how to route the lines though.

I think you just connect the port on the breather/separator to the port on your intake and cap-off the port at the back of the engine. But maybe I'm wrong???

http://www.camaro5.com/forums/showthread.php?t=256656

[PoorMansCamaro]

awe man, my posts got deleted. lol

[menendez1293]

Originally Posted by pgustavson

I think you just connect the breather/separator to the port at the back of the engine and cap-off the port on your intake. But maybe I'm wrong???

See i thought it was the other way around. The separator goes to the intake and the fitting on the valve cover gets capped. But maybe I'm wrong.

[menendez1293]

Originally Posted by PoorMansCamaro

awe man, my posts got deleted. lol

be careful they don't come after you

[PoorMansCamaro]

I thought it worked just like the dirty side. connect it to the rear and to the intake. lol

[PoorMansCamaro]

Originally Posted by menendez1293

be careful they don't come after you

I was just joking around. not my fault the other guy got butthurt. although, he said he was joking (which I knew), it wasn't a very good joke, as you CAN go fast enough in reverse to get bugs splattered all over the rear. I made a good post about how fast you can go in reverse, but that got deleted too.

[pgustavson]

Originally Posted by menendez1293

See i thought it was the other way around. The separator goes to the intake and the fitting on the valve cover gets capped. But maybe I'm wrong.

I fixed my post...I had it backwards

I posted a link to the install on the V8

[menendez1293]

Originally Posted by pgustavson

I fixed my post...I had it backwards

I posted a link to the install on the V8

Alright so it does go to the intake. I wonder if it will work with the CAI inc intake or if i would need to adapt it.

[Monchy36]

Originally Posted by PoorMansCamaro

I was just joking around. not my fault the other guy got butthurt. although, he said he was joking (which I knew), it wasn't a very good joke, as you CAN go fast enough in reverse to get bugs splattered all over the rear. I made a good post about how fast you can go in reverse, but that got deleted too.

I assist you too but got deleted... I don't want to be prosecute so I apologies...

[Monchy36]

Originally Posted by menendez1293

Alright so it does go to the intake. I wonder if it will work with the CAI inc intake or if i would need to adapt it.

If you going to do that, please make a good DIY about it thinking in following you!

[PoorMansCamaro]

Originally Posted by Monchy36

I assist you too but got deleted... I don't want to be prosecute so I apologies...

yeah, I saw your post. lol

[menendez1293]

Originally Posted by Monchy36

If you going to do that, please make a good DIY about it thinking in following you!

I probably will do it in the future but I want some other things first. Believe it or not the GM 1LE separator is like 150 or 180 from maureen