GM & Ford join to develop 9 and 10 speed auto transmissions

[BaylorCamaro]

GM & Ford are teaming up to develop nine and ten speed automatic gearboxes.

Official press release:

Ford and GM to Jointly Develop Advanced Nine- and 10-Speed Automatic Transmissions

- New project to build on success of previous collaborations

- Initial design and engineering work is already under way

- New transmissions will improve fuel economy and enhance performance


DEARBORN, Mich., April 15, 2013 – Ford Motor Company and General Motors Corporation have signed an agreement under which both companies will jointly develop an all-new generation of advanced-technology nine- and 10-speed automatic transmissions for cars, crossovers, SUVs and trucks.

The new transmissions, to be built in both front- and rear-wheel-drive variants, will improve vehicle performance and increase fuel economy.

The collaboration enables both automakers to design, develop, engineer, test, validate and deliver these new transmissions for their vehicles faster and at lower cost than if each company worked independently.

"Engineering teams from GM and Ford have already started initial design work on these new transmissions," said Jim Lanzon, GM vice president of global transmission engineering. "We expect these new transmissions to raise the standard of technology, performance and quality for our customers while helping drive fuel economy improvements into both companies' future product portfolios."

A track record of success
This new agreement marks the third time in the past decade that GM and Ford have collaborated on transmissions. These collaborative efforts have enabled both companies together to deliver more than 8 million durable, high-quality six-speed front-wheel-drive transmissions to customers around the globe.

Ford installs these six-speed transmissions in some of America's favorite vehicles, such as the Ford Fusion family sedan, the Ford Edge crossover and Ford Escape and Explorer SUVs, while GM installs them into a variety of high-volume, award-winning products such as the Chevrolet Malibu, Chevrolet Traverse, Chevrolet Equinox and Chevrolet Cruze.

That original collaboration served as a template for the new one. As before, each company will manufacture its own transmissions in its own plants with many common components.

"The goal is to keep hardware identical in the Ford and GM transmissions. This will maximize parts commonality and give both companies economy of scale," said Craig Renneker, Ford's
chief engineer for transmission and driveline component and pre-program engineering. "However, we will each use our own control software to ensure that each transmission is carefully matched to the individual brand-specific vehicle DNA for each company."

"With the jointly developed six-speed automatics we have in production today, we've already proven that Ford and GM transmission engineers work extremely well together," said Joe Bakaj, Ford vice president of powertrain engineering. "Our front-wheel-drive transmissions have exceeded expectations and there is every reason to believe we will have the same success with these all-new transmissions."

"This agreement provides tremendous benefits for both companies, and it will pay big dividends for our customers and shareholders," added Lanzon. "By jointly sharing the development of these two new families of transmissions, both GM and Ford will be able to more efficiently use our respective manpower resources to develop additional future advanced transmissions and bring them to market faster than if we worked alone."

Further technical details and vehicle applications for these transmissions will be released by each company at the appropriate time before launch.

[G-Oil Guy]

Makes sense. Pooling resources minimizes risk and investment costs for each party while providing a benefit that can potentially licensed to other companies to use.

[DGthe3]

Comment about '10 speeds are too many' in 5 ... 4 ... 3 ...

[its a syn]

American teamwork.

[RED DEMON SS]

GM & Ford have signed a Partnership to develop a 9 & 10 speed automatic transmission!





Official press release:


Ford and GM to Jointly Develop Advanced Nine- and 10-Speed Automatic Transmissions

- New project to build on success of previous collaborations

- Initial design and engineering work is already under way

- New transmissions will improve fuel economy and enhance performance


DEARBORN, Mich., April 15, 2013 – Ford Motor Company and General Motors Corporation have signed an agreement under which both companies will jointly develop an all-new generation of advanced-technology nine- and 10-speed automatic transmissions for cars, crossovers, SUVs and trucks.

The new transmissions, to be built in both front- and rear-wheel-drive variants, will improve vehicle performance and increase fuel economy.

The collaboration enables both automakers to design, develop, engineer, test, validate and deliver these new transmissions for their vehicles faster and at lower cost than if each company worked independently.

"Engineering teams from GM and Ford have already started initial design work on these new transmissions," said Jim Lanzon, GM vice president of global transmission engineering. "We expect these new transmissions to raise the standard of technology, performance and quality for our customers while helping drive fuel economy improvements into both companies' future product portfolios."

A track record of success
This new agreement marks the third time in the past decade that GM and Ford have collaborated on transmissions. These collaborative efforts have enabled both companies together to deliver more than 8 million durable, high-quality six-speed front-wheel-drive transmissions to customers around the globe.

Ford installs these six-speed transmissions in some of America's favorite vehicles, such as the Ford Fusion family sedan, the Ford Edge crossover and Ford Escape and Explorer SUVs, while GM installs them into a variety of high-volume, award-winning products such as the Chevrolet Malibu, Chevrolet Traverse, Chevrolet Equinox and Chevrolet Cruze.

That original collaboration served as a template for the new one. As before, each company will manufacture its own transmissions in its own plants with many common components.

"The goal is to keep hardware identical in the Ford and GM transmissions. This will maximize parts commonality and give both companies economy of scale," said Craig Renneker, Ford's
chief engineer for transmission and driveline component and pre-program engineering. "However, we will each use our own control software to ensure that each transmission is carefully matched to the individual brand-specific vehicle DNA for each company."

"With the jointly developed six-speed automatics we have in production today, we've already proven that Ford and GM transmission engineers work extremely well together," said Joe Bakaj, Ford vice president of powertrain engineering. "Our front-wheel-drive transmissions have exceeded expectations and there is every reason to believe we will have the same success with these all-new transmissions."

"This agreement provides tremendous benefits for both companies, and it will pay big dividends for our customers and shareholders," added Lanzon. "By jointly sharing the development of these two new families of transmissions, both GM and Ford will be able to more efficiently use our respective manpower resources to develop additional future advanced transmissions and bring them to market faster than if we worked alone."

Further technical details and vehicle applications for these transmissions will be released by each company at the appropriate time before launch.

[Tysen]

[CamaroSkooter]

Originally Posted by DGthe3

Comment about '10 speeds are too many' in 5 ... 4 ... 3 ...

... 2 ... 1 ...

But could you imagine a manual 10-speed? You could skip two or three gears and it probably wouldn't mae a lick of difference....

...unless redline was at 3,000 RPMs...

[boombuilt]

Oh what the brand loyal sheep will have to say about this.

[90503]

....They're going the wrong way...For best economy, we need to bring back the "three on the tree"....lol

[Ohten]

If you stop and think about it the R&D wont be fully on one company and just maybe faster to market and maybe cheaper to the consumer.

[Frank in MD]

Meh, they have worked together before in the early 2000's to develop the 6 speed trans that are being used today. It's just a way for both companies to accelerate development while saving money on parts.

[Lawdog1911]

Jammin thru the gears like a semi JK

[daveagogo1]

This is nothing new.

[tramtwo]

how about a five over five...