|
|
#1 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Ok so this has nothing to do with my camaro, but with my motorcycle. I've bumped my compression up a bit from 12.5:1 up to 13.8:1. Should I be running a hotter or cooler plugs from stock. Right now my AFR is around 13.
|
|
|
|
|
|
#2 |
![]() Drives: Fifty 2SS Vert Join Date: Dec 2009
Location: That rock next to Vancouver
Posts: 355
|
cooler
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Will I notice a difference? Right now I'm hotter than stock.
|
|
|
|
|
|
#4 |
|
Would rather be riding
Drives: No car no more Join Date: Jul 2009
Location: Indiana
Posts: 2,750
|
Generally one heat range cooler if it's a big CC 'meltdown motor' bike but you aren't very specific.
In most cases stock plugs work just fine in N/A motorcycles. |
|
|
|
|
|
#5 |
|
Would rather be riding
Drives: No car no more Join Date: Jul 2009
Location: Indiana
Posts: 2,750
|
|
|
|
|
|
|
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
It's so loud I can't tell if its pinging. My rev limiter is at 17,200. I run 93 Oct and I feels smother if I run octane boost in it.
|
|
|
|
|
|
#7 | |
|
Would rather be riding
Drives: No car no more Join Date: Jul 2009
Location: Indiana
Posts: 2,750
|
Quote:
Put stock plugs back in it. Sounds like its a 600 , 13.8:1 compression is nothing for an engine with such a small bore. If it's been dyno tuned it will be fine. For instance, my 1287 has 13.2:1 and I run 93 octane fuel safely with it. |
|
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
It's a 750 but almost identical to the 600. Right now the plugs I have in the bike are NGK Iridium CE9E I'm going to step down to a NGK standard plug CR10E.
|
|
|
|
|
|
#9 |
|
Would rather be riding
Drives: No car no more Join Date: Jul 2009
Location: Indiana
Posts: 2,750
|
NGK says the higher the number the colder the plug.
Both my bikes call for the CR9E |
|
|
|
|
|
#10 |
![]() Drives: a Panty Dropper Join Date: Feb 2012
Location: Dehi
Posts: 478
|
13:8:1 is C12 territory not pump gas. Good luck on the motor but I don't see it lasting to long. I'v been building motorcycle motors and atv motors for years now and I would never recommend using pump gas on that kind of compression
__________________
![]() |
|
|
|
|
|
#11 |
|
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Octane boost as in like the 104+ booster they sell in the auto parts store? Or race fuel concentrate? My understanding is the simply octane booster stuff really doesn't do much at all...
__________________
|
|
|
|
![]() |
|
|