PWA 3: Dark of the Lounge

[WadeWilson]

Originally Posted by PoorMansCamaro

Best one ever!!!

[2010 SSRS]

Originally Posted by PoorMansCamaro

lmao

[PoorMansCamaro]

Originally Posted by insidethreat07

Sweet i hope to lose some .10s by doing some suspension stuff and maybe a K&n FIPK and taking the jack and spare tire out of the back

no, that is not sweet. with my mods, i should be in the 12's.

[WadeWilson]

Originally Posted by PoorMansCamaro

no, that is not sweet. with my mods, i should be in the 12's.

I should be high 10s, but getting the car to hook for a decent 60' time is another story.

[insidethreat07]

Originally Posted by PoorMansCamaro

no, that is not sweet. with my mods, i should be in the 12's.

I ont know what your modes are lol sorry

[insidethreat07]

Originally Posted by PoorMansCamaro

no, that is not sweet. with my mods, i should be in the 12's.

Originally Posted by Shardik2SS

I should be high 10s, but getting the car to hook for a decent 60' time is another story.

Slicks?

[PoorMansCamaro]

Originally Posted by Shardik2SS

I should be high 10s, but getting the car to hook for a decent 60' time is another story.

yeah, i had a little bit of a traction issue, but i had a 60' of 2.3. which isn't terrible without a window switch and feathering it off the line. I should have at least hit mid 13's with that 60'.

[PoorMansCamaro]

Originally Posted by insidethreat07

I ont know what your modes are lol sorry

you asked the other day, and i posted all my mods. lol you must have left.

hold on, let me post them again.

[insidethreat07]

Originally Posted by PoorMansCamaro

yeah, i had a little bit of a traction issue, but i had a 60' of 2.3. which isn't terrible without a window switch and feathering it off the line. I should have at least hit mid 13's with that 60'.

What you thin the problem is? Just cant get off the line hard or what?

[insidethreat07]

Originally Posted by PoorMansCamaro

you asked the other day, and i posted all my mods. lol you must have left.

hold on, let me post them again.

YEa I must of left lol

[PoorMansCamaro]

Appearance -

Bowtie blackout
Synergy green Door panel and dash inserts
AAC footwell lighting - Green
AAC v6 scanner - Green
AAC chrome turn signal bulbs
Synergy green hood spears
Synergy green gill inserts
8pc blackout kit for tail lights/side markers
Blacked out tail light bezels

Performance -

Injen Cold Air Intake
Vmax Ported Throttle Body
BBK LT w/ Hi Flow Cats
Corsa Catback
Hurst Short Shifter
RX catch can w/ Breather
Zex nitrous kit/accessories
Trifecta tune
Black ICE-olator

Suspension/Wheels -

RS rims - blackout
BMR tunnel brace
BMR trailing arms
BMR trailing arm bushings
Eibach lowering springs

[insidethreat07]

BRB making som PB&Js

[WadeWilson]

Originally Posted by insidethreat07

Slicks?

That would definitely help, but I don't want to spend extra money on a set of rear wheels just to run slicks on. It can be done with DRs, and I just need some more seat time to get my launch down.

Originally Posted by PoorMansCamaro

yeah, i had a little bit of a traction issue, but i had a 60' of 2.3. which isn't terrible without a window switch and feathering it off the line. I should have at least hit mid 13's with that 60'.

WOW, and I wasn't happy with my 1.78 60' time.

[PoorMansCamaro]

Originally Posted by insidethreat07

What you thin the problem is? Just cant get off the line hard or what?

I think my biggest issue is the tune. after that, i need to get my window switch put in, so i can launch properly, to get a good 60'.

getting DR's or slicks would definitely help.