PWA "The Lounge" PART 2

[PoorMansCamaro]

Originally Posted by badgebunny

Howdy trouble.

I'm getting a good chunk of change back from taxes, looks like trifecta is in my near future...

[WadeWilson]

Originally Posted by badgebunny

*faints*

It's nothing major other than 1,400HP axles and 3200 stall. Possibly 3.73 gears & coil-overs too if my budget will allow.

[PoorMansCamaro]

Originally Posted by Shardik2SS

It's nothing major other than 1,400HP axles and 3200 stall. Possibly 3.73 gears & coil-overs too if my budget will allow.

Awww shucks! That's it?!

[WadeWilson]

Originally Posted by PoorMansCamaro

Awww shucks! That's it?!

Well it's not a new 9" rear end or anything.

I would like to do Jannetty's posi mod though.

[bossbunny]

Originally Posted by PoorMansCamaro

I'm getting a good chunk of change back from taxes, looks like trifecta is in my near future...

I'm trying to stay away from Trifecta. Owen said they could adjust my a/f with some of the nitrious thingys and we would get around the timing with 116 racing fuel.

Originally Posted by Shardik2SS

It's nothing major other than 1,400HP axles and 3200 stall. Possibly 3.73 gears & coil-overs too if my budget will allow.

GEEEEZUM.

Owen wants to do a 3200 stall on mine. Really need a 3400 to get into the powerband but i dont want to straight out kill my tranny. I wish I could do gears... Plush richmond said theres weren't for track use... lame.

[PoorMansCamaro]

I wish there was at least half the things available for the LLT as there is the ls3 and l99...*sigh*

[CamaroFemme]

Originally Posted by Shardik2SS

It's nothing major other than 1,400HP axles and 3200 stall. Possibly 3.73 gears & coil-overs too if my budget will allow.

How do you even GET 1400 HP? Strap three LS1s together??

[66olds442]

Originally Posted by Shardik2SS

I know the crankshaft alone is close to $1,300 or so. I will ask them about what you mentioned though. If they feel it's best to go with a new LS3 block I can just sell mine and get some money back. I was already planning on selling my Comp Cam.

Here is a link to their site.

http://www.rdpmotorsport.com/Racing.aspx

Ya, I checked out their site to see if I could find any prices and such. So since they are in Ohio, how do you plan on them doing the build?

[bossbunny]

Originally Posted by PoorMansCamaro

I wish there was at least half the things available for the LLT as there is the ls3 and l99...*sigh*

Word. Freaking sucks.

Originally Posted by CamaroFemme

How do you even GET 1400 HP? Strap two LS1s together??

HAHAHA.

[WadeWilson]

Originally Posted by PoorMansCamaro

I wish there was at least half the things available for the LLT as there is the ls3 and l99...*sigh*

Wish you guys had more options too bud.

Originally Posted by CamaroFemme

How do you even GET 1400 HP? Strap two LS1s together??

I don't even want 1,400HP but the axles are recommended for the power I'll be pushing to the wheels.

[PoorMansCamaro]

Originally Posted by badgebunny

I'm trying to stay away from Trifecta. Owen said they could adjust my a/f with some of the nitrious thingys and we would get around the timing with 116 racing fuel.

Lol, are you making this a full race car? Or do you plan on driving with race fuel when not using nitrous?

[WadeWilson]

Originally Posted by 66olds442

Ya, I checked out their site to see if I could find any prices and such. So since they are in Ohio, how do you plan on them doing the build?

Shipping my car to them and I'll fly to pick it up and drive back. I have family and friends in WV/OH so I plan to stop in and see them while I'm back east.

[bossbunny]

Originally Posted by PoorMansCamaro

Lol, are you making this a full race car? Or do you plan on driving with race fuel when not using nitrous?

Hahaha. Well I gots a goal. But no I will have a race gas tank under the hood like Russ. Only for track purposes.

[66olds442]

Originally Posted by Shardik2SS

It's nothing major other than 1,400HP axles and 3200 stall. Possibly 3.73 gears & coil-overs too if my budget will allow.

NVM.....