PWA "The Lounge" PART 2 - Page 637

Zabo · 03-12-2011, 08:56 PM

Quote:

Originally Posted by DGthe3

hmmm ...
should I put this in the random quote thread or not?
:seesaw:

Yep. He likes Camaros and Mustangs..

WadeWilson · 03-12-2011, 09:54 PM

Hoes!! I just finished watching Faster with Dwayne Johnson. It could have been better, but it was good for the most part.

bossbunny · 03-12-2011, 10:13 PM

Quote:

Originally Posted by Shardik2SS

Hoes!! I just finished watching Faster with Dwayne Johnson. It could have been better, but it was good for the most part.

Me and Skip watched it the other night. It was better than I thought it would be. But I was hoping he would talk more and the plot would be a little more complex.

WadeWilson · 03-12-2011, 10:31 PM

Quote:

Originally Posted by badgebunny

Me and Skip watched it the other night. It was better than I thought it would be. But I was hoping he would talk more and the plot would be a little more complex.

Yeah it was pretty predictable, but I loved his car.

Xanthos · 03-12-2011, 10:32 PM

Hoes.

I'm covered in oil, dirt, blood, sweat, tears, and por-dry.

But my shifter no longer moves two inches when I punch it, my trans brace isn't dragging on speed bumps anymore, my passenger side headlight works again, my oil level sensor isn't hemmorhaging oil anymore, and my engine bay looks a lot better (rewrapped all my wiring with new electrical tape and replaced the tubing where it was broken).

I'm happy with how much I got done today.
- X

WadeWilson · 03-12-2011, 10:40 PM

Quote:

Originally Posted by Xanthos

Hoes.

I'm covered in oil, dirt, blood, sweat, tears, and por-dry.

But my shifter no longer moves two inches when I punch it, my trans brace isn't dragging on speed bumps anymore, my passenger side headlight works again, my oil level sensor isn't hemmorhaging oil anymore, and my engine bay looks a lot better (rewrapped all my wiring with new electrical tape and replaced the tubing where it was broken).

I'm happy with how much I got done today.
- X

bossbunny · 03-12-2011, 10:57 PM

Quote:

Originally Posted by Xanthos

Hoes.

I'm covered in oil, dirt, blood, sweat, tears, and por-dry.

But my shifter no longer moves two inches when I punch it, my trans brace isn't dragging on speed bumps anymore, my passenger side headlight works again, my oil level sensor isn't hemmorhaging oil anymore, and my engine bay looks a lot better (rewrapped all my wiring with new electrical tape and replaced the tubing where it was broken).

I'm happy with how much I got done today.
- X

My hat goes off to you sir!

Xanthos · 03-12-2011, 11:02 PM

Quote:

Originally Posted by Shardik2SS

<snip>

LMFAO. I pounded the stock tunnel brace back into shape so it'll work for now. Eventually I want one of these:

85 bucks from summit.
- X

WadeWilson · 03-12-2011, 11:05 PM

Quote:

Originally Posted by Xanthos

LMFAO. I pounded the stock tunnel brace back into shape so it'll work for now. Eventually I want one of these:

85 bucks from summit.
- X

Nice!

helmincamaro · 03-12-2011, 11:08 PM

Quote:

Originally Posted by Xanthos

LMFAO. I pounded the stock tunnel brace back into shape so it'll work for now. Eventually I want one of these:

85 bucks from summit.
- X

$85 for that???

I could make that outta scrap steel I got in the garage for nothing

helmincamaro · 03-12-2011, 11:12 PM

check out this beast I saw today!

check out the rear wheels.... 20"x16"!

WadeWilson · 03-12-2011, 11:13 PM

Happy birthday!!!

Xanthos · 03-12-2011, 11:16 PM

Quote:

Originally Posted by helmincamaro

$85 for that???

I could make that outta scrap steel I got in the garage for nothing

You have scrap Chromemoly steel in your garage? LMFAO.

Actually, 85 bucks is a pretty good price. A boxed style tunnel brace like that for the 5th gen is 90 bucks, and doesn't include a built in driveshaft loop. Driveshaft loops for the 5th gen are 130.
- X

helmincamaro · 03-12-2011, 11:18 PM

Quote:

Originally Posted by Xanthos

You have scrap Chromemoly steel in your garage? LMFAO.

Actually, 85 bucks is a pretty good price. A boxed style tunnel brace like that for the 5th gen is 90 bucks, and doesn't include a built in driveshaft loop. Driveshaft loops for the 5th gen are 130.
- X

I got a ton of 4130 steel..... its some pretty strong stuff. I should start making this stuff myself, they got some markup in it!

03-12-2011, 10:32 PM	#8909
Xanthos PWA Relapse Drives: Formerly-Stick Join Date: Mar 2008 Location: Oklahoma Posts: 12,588 View My Garage	Hoes. I'm covered in oil, dirt, blood, sweat, tears, and por-dry. But my shifter no longer moves two inches when I punch it, my trans brace isn't dragging on speed bumps anymore, my passenger side headlight works again, my oil level sensor isn't hemmorhaging oil anymore, and my engine bay looks a lot better (rewrapped all my wiring with new electrical tape and replaced the tubing where it was broken). I'm happy with how much I got done today. - X __________________ 2017 1LT/RS A8 Hyper Blue Metallic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SEMA Show 2011 - New Camaro Products Showcase!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	85	01-16-2012 11:51 PM
Injen CAI part numbers. 2010-11 v6	mypuppysirius	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	1	11-01-2011 06:24 PM
Did you get an "EVENT HISTORY" for YOUR car?	CamaroScotty	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	24	11-21-2010 12:20 PM
New DSV Customs Real Carbon Fiber Back Panel Inserts (Pictures Inside)	dsvcustoms	Cosmetics and Lighting Modification Discussions	3	10-12-2009 01:25 AM

03-12-2011, 09:54 PM	#8906
WadeWilson How U Doin? Drives: 2014 CTS-V Coupe Join Date: Oct 2008 Location: Californication Posts: 24,154 View My Garage	Hoes!! I just finished watching Faster with Dwayne Johnson. It could have been better, but it was good for the most part.

03-12-2011, 11:13 PM	#8916
WadeWilson How U Doin? Drives: 2014 CTS-V Coupe Join Date: Oct 2008 Location: Californication Posts: 24,154 View My Garage	Happy birthday!!!