PWA "The Lounge" PART 2 - Page 519

Zabo · 02-27-2011, 02:09 PM

Quote:

Originally Posted by DGthe3

take a small electric pump

and an appropriate battery

some copper tubing

a nozzle

a fuel tank (add fuel later)

a trigger

and a mini torch

Assemble them onto some sort of frame work and you get ...
a snow remover!

Yeah.. last year when I tried to fire that up there was this little thing called HOA calling the fire department, Police, FBI, and ATF on me..

*DGthe3* · 02-27-2011, 02:44 PM

Quote:

Originally Posted by Zabo

Yeah.. last year when I tried to fire that up there was this little thing called HOA calling the fire department, Police, FBI, and ATF on me..

Flame throwers are almost as effective at removing people from an area as they are at removing snow. But if you don't want to put your faith in the fear of flame, I can tell you how to make yourself some body armour. Unfortunately, its a hard armour so it won't be terribly comfortable. Its also quite heavy. On the plus side it is saleable so that you can stop just about anything so long as you can still manage the weight.

brandotron · 02-27-2011, 03:02 PM

The brandotron has entered the lounge. Lakers are on. That is all.

shank0668 · 02-27-2011, 07:35 PM

Empty?

*DGthe3* · 02-27-2011, 11:12 PM

Full?

*DGthe3* · 02-28-2011, 12:24 AM

I just re-read the entire random quote thread. It is filled with awesomeness

Xanthos · 02-28-2011, 05:22 AM

Quote:

Originally Posted by DGthe3

I just re-read the entire random quote thread. It is filled with awesomeness

There are a couple of me in there, I believe.
- X

Xanthos · 02-28-2011, 08:13 AM

So, funny story.

I'm sitting here looking at all the cool ch*t for the 5th gen, and going "hey, why isn't there all this cool ch*t for the 4th gens?"

So, I got to looking around and started going "hey, thats kinda cool" and started printing off things that I thought were cool.

Two hours later, I have a stack of papers a half inch thick, totaling almost 10000 dollars, not counting shipping.

I'm sorry, 4th gen gods. You've proven me wrong again.

I also have a tooth off my ring gear that I want to turn into a necklace or keychain, but I can't figure out the best way to do it. I've got a file to clean up the sharp edges (it did not part amicably with the rest of the gear), but I don't know if I have a small enough/sharp enough/hard enough bit to drill a hole in it so I can put it on a string or key ring.
- X

bossbunny · 02-28-2011, 08:30 AM

Quote:

Originally Posted by Xanthos

So, funny story.

I'm sitting here looking at all the cool ch*t for the 5th gen, and going "hey, why isn't there all this cool ch*t for the 4th gens?"

So, I got to looking around and started going "hey, thats kinda cool" and started printing off things that I thought were cool.

Two hours later, I have a stack of papers a half inch thick, totaling almost 10000 dollars, not counting shipping.

I'm sorry, 4th gen gods. You've proven me wrong again.

I also have a tooth off my ring gear that I want to turn into a necklace or keychain, but I can't figure out the best way to do it. I've got a file to clean up the sharp edges (it did not part amicably with the rest of the gear), but I don't know if I have a small enough/sharp enough/hard enough bit to drill a hole in it so I can put it on a string or key ring.
- X

Hahah. Yeah but you have expensive tastes! LOL. Just kidding. Welp, start saving!

Tooth fairy didn't come? That floozy.

Da Hose · 02-28-2011, 08:40 AM

Happy Monday to you Ho's!!!!

bossbunny · 02-28-2011, 08:44 AM

Quote:

Originally Posted by Da Hose

Happy Monday to you Ho's!!!!

Is it Friday yet?!

Xanthos · 02-28-2011, 09:02 AM

Quote:

Originally Posted by badgebunny

Is it Friday yet?!

No.
- X

66olds442 · 02-28-2011, 09:37 AM

Quote:

Originally Posted by Xanthos

No.
- X

Did you hear that? Sounds like someone's dream just got shattered.

Good morning HOES! "You sposed to be up cookin' breakfast for somebody. It's like an alarm clock, WHOOOO WHOOOOOOOOOOOO!"

Xanthos · 02-28-2011, 09:39 AM

Quote:

Originally Posted by 66olds442

Did you hear that? Sounds like someone's dream just got shattered.

Like the breaking of plate as it smashes against the floor. The perfect end to the sense of disappointment you felt as you watched the wet plate slip through your fingers only seconds before.
- X

02-27-2011, 03:02 PM	#7255
brandotron I am the internets. Drives: dangerously Join Date: May 2009 Location: Redondo Beach, CA Posts: 12,571 View My Garage	The brandotron has entered the lounge. Lakers are on. That is all. __________________

02-27-2011, 11:12 PM	#7257
DGthe3 Moderator.ca Drives: 05 Grand Am GT Join Date: Jul 2007 Location: Niagara, Canada Posts: 25,366	Full? __________________ Note, if I've gotten any facts wrong in the above, just ignore any points I made with them __________________ Originally Posted by FbodFather My sister's dentist's brother's cousin's housekeeper's dog-breeder's nephew sells coffee filters to the company that provides coffee to General Motors...... ........and HE WOULD KNOW!!!! __________________ Camaro Fest sub-forum

02-28-2011, 12:24 AM	#7258
DGthe3 Moderator.ca Drives: 05 Grand Am GT Join Date: Jul 2007 Location: Niagara, Canada Posts: 25,366	I just re-read the entire random quote thread. It is filled with awesomeness __________________ Note, if I've gotten any facts wrong in the above, just ignore any points I made with them __________________ Originally Posted by FbodFather My sister's dentist's brother's cousin's housekeeper's dog-breeder's nephew sells coffee filters to the company that provides coffee to General Motors...... ........and HE WOULD KNOW!!!! __________________ Camaro Fest sub-forum

02-28-2011, 08:13 AM	#7260
Xanthos PWA Relapse Drives: Formerly-Stick Join Date: Mar 2008 Location: Oklahoma Posts: 12,588 View My Garage	So, funny story. I'm sitting here looking at all the cool cht for the 5th gen, and going "hey, why isn't there all this cool cht for the 4th gens?" So, I got to looking around and started going "hey, thats kinda cool" and started printing off things that I thought were cool. Two hours later, I have a stack of papers a half inch thick, totaling almost 10000 dollars, not counting shipping. I'm sorry, 4th gen gods. You've proven me wrong again. I also have a tooth off my ring gear that I want to turn into a necklace or keychain, but I can't figure out the best way to do it. I've got a file to clean up the sharp edges (it did not part amicably with the rest of the gear), but I don't know if I have a small enough/sharp enough/hard enough bit to drill a hole in it so I can put it on a string or key ring. - X __________________ 2017 1LT/RS A8 Hyper Blue Metallic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SEMA Show 2011 - New Camaro Products Showcase!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	85	01-16-2012 11:51 PM
Injen CAI part numbers. 2010-11 v6	mypuppysirius	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	1	11-01-2011 06:24 PM
Did you get an "EVENT HISTORY" for YOUR car?	CamaroScotty	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	24	11-21-2010 12:20 PM
New DSV Customs Real Carbon Fiber Back Panel Inserts (Pictures Inside)	dsvcustoms	Cosmetics and Lighting Modification Discussions	3	10-12-2009 01:25 AM

02-27-2011, 07:35 PM	#7256
shank0668 Drives: '14 LML/'06 LJ/'76 Trans Am Join Date: Feb 2008 Location: Ohio Posts: 8,438 View My Garage	Empty?

02-28-2011, 08:40 AM	#7262
Da Hose ACCOUNT HOZED BY GN...... Drives: 2011 SGM 2SS/RS #26731 Join Date: Oct 2009 Location: Katy, TX Posts: 5,891 View My Garage	Happy Monday to you Ho's!!!!