Livernois Shelby GT1000R Mag Shoot Photos

Chris@Livernois · 02-17-2011, 09:01 AM

Watch for this in the April 2011 issue of Muscle Mustangs & Fast Fords Magazine. Mike "The Photo Guy" Yoksich shot the photos for the article. I took my camera along and took these shots.

Mike The Photo Guy sent me these.... I thought I was going to jail after that burnout. We sat there contemplating for a while, then I did it and as I rolled out of the smoke, the police drove by. There is no way they didn't hear or see it

Here's the dyno graph... yes it makes over 800 RWTQ at 2,600 RPM's. It's a bit of a handful. :rockon:

The car is nearly 4,200 lbs. with driver and I ran 9.93 @ 142 mph on 20's in it letting off the gas pretty early, because it was cold and it was getting a little squirrelly. Earlier in the day spinning, in and out of the gas, staying in it, it went 150 mph.

-Rick

Scrappy Doo · 02-17-2011, 02:37 PM

How fast is directly proportional to how big a check to write!

It's a great looking car Rick.

I couldn't imagine trying to even drive it.... LOL

WadeWilson · 02-17-2011, 03:24 PM

That car looks like it's hell on wheels!

garcmol · 02-17-2011, 03:51 PM

Quote:

Originally Posted by Rick@Livernois

Here's the dyno graph... yes it makes over 800 RWTQ at 2,600 RPM's. It's a bit of a handful. :rockon:

-Rick

...and 450 rwhp at the same??? Holy crap!

Outlaw77 · 02-17-2011, 07:57 PM

thats one hot stang!

camarowa · 02-17-2011, 09:39 PM

I am really starting to like gt500s more and more. This one however seems to be class apart.

Chris@Livernois · 02-17-2011, 11:28 PM

Thanks for the replies!

Quote:

Originally Posted by Scrappy Doo

How fast is directly proportional to how big a check to write!

It's a great looking car Rick.

I couldn't imagine trying to even drive it.... LOL

Driving around town, you would never know it made the kind of power it does. It's very tame until you get on the gas. I put about 400 miles on it that day between the photo shoot and driving to and from the track.

It's a handful to drive on those tires. I'll be honest, I was a little nervous/scared of the car at the track. It really needs a slick or a 15" drag radial with a good sidewall.

My first pass had a 2.something 60' and was 11.0 @ 150 mph. I got some mid 10 passes with a lot of mph, a 10.40, then the last pass, it went a 1.9 60' and 6.51 @ 116 mph in the 1/8th. It got a little loose and I let off before the 1/4 but was still happy with with 9's on 20's

Full mods list is:

Livernois Motorsports Built 358ci Aluminum Longblock
Big Bore GT Supercar Aluminum Block
Carrillo Billet Rods
Custom Diamond Pistons Engineered by Livernois
Canton Oil Pan
Livernois Motorsports CNC Cylinder Heads
Livernois Motorsports GT500 Stage 1C Camshafts
Whipple 4.0L Supercharger
Whipple Single Blade Throttle Body
Fore Precision Works Triple Pump Fuel Hat
3 Ford GT Supercar Fuel Pumps
Innovators West 10% Overdrive Balancer
Kooks Custom 1 7/8” Headers
Kooks 3” Offroad X-Pipe
Magnaflow 3” Catback
Afco Heat Exchanger
Ford Racing / Centerforce DFX Clutch
Dynotech 1-Piece Aluminum Driveshaft
Metco Driveshaft Loop
QA1 Adjustable Shocks
QA1 Adjustable Struts w/ Coilovers
BMR Rear Springs
BMR Adjustable Upper & Lower Control Arms
BMR Adjustable Panhard Bar & Brace
BMR Swaybar Relocation Kit
BMR Subframe Connectors
10-Point Roll Cage
Suncoast GT500KR Style Hood
Shelby Super Snake Wheels
Tuned by Livernois Motorsports

-Rick

Scrappy Doo · 02-18-2011, 12:14 PM

I know if I have to ask, I can't afford it.

But, what would it take to get 1 of these?

Camaro21 · 02-18-2011, 12:30 PM

SlowSS · 02-18-2011, 12:32 PM

Good Lord!!! Nice

Sleestack · 02-18-2011, 12:53 PM

Quote:

Originally Posted by Rick@Livernois

Watch for this in the April 2011 issue of Muscle Mustangs & Fast Fords Magazine. Mike "The Photo Guy" Yoksich shot the photos for the article. I took my camera along and took these shots.

-Rick

Nice, that is a fast color.....

Chris@Livernois · 02-18-2011, 05:31 PM

Quote:

Originally Posted by Scrappy Doo

I know if I have to ask, I can't afford it.

But, what would it take to get 1 of these?

A stock Shelby + roughly $65,000

-Rick

garcmol · 02-22-2011, 10:02 PM

Quote:

Originally Posted by Rick@Livernois

A stock Shelby + roughly $65,000

-Rick

oxymoron

Thrasherman · 02-23-2011, 12:11 AM

thats one ANGRY stang! Nice Job...

02-17-2011, 09:01 AM	#1
Chris@Livernois Drives: 2010 Camaro Join Date: Jun 2009 Location: Dearborn Heights, MI Posts: 829	Livernois Shelby GT1000R Mag Shoot Photos Watch for this in the April 2011 issue of Muscle Mustangs & Fast Fords Magazine. Mike "The Photo Guy" Yoksich shot the photos for the article. I took my camera along and took these shots. Mike The Photo Guy sent me these.... I thought I was going to jail after that burnout. We sat there contemplating for a while, then I did it and as I rolled out of the smoke, the police drove by. There is no way they didn't hear or see it Here's the dyno graph... yes it makes over 800 RWTQ at 2,600 RPM's. It's a bit of a handful. :rockon: The car is nearly 4,200 lbs. with driver and I ran 9.93 @ 142 mph on 20's in it letting off the gas pretty early, because it was cold and it was getting a little squirrelly. Earlier in the day spinning, in and out of the gas, staying in it, it went 150 mph. -Rick

02-17-2011, 09:39 PM	#6
camarowa Drives: 2013 SVT Raptor, sold 2010 Camaro Join Date: Jul 2009 Location: PNW....almost canada Posts: 1,907	I am really starting to like gt500s more and more. This one however seems to be class apart. __________________ - Pfadt Suspension Package; Springs & Sways - Brembo Brake Upgrade (Yellow); Courtesy Fesler Built - Custom Magnaflow Exhaust - Blacked-Out Bowties & RS Emblems, Front bowtie delete - Full Dynamat Extreme Trunk Coverage - Tinted side markers - Interior DSV Customs Leather Upgrades - Airaid CAI V2 - Forgestar F14 Gunmetal 20x9, 20x11 - Doug Thorley Shorties

02-18-2011, 12:32 PM	#10
SlowSS Drives: 2013 Camaro 2SS/RS 1LE Join Date: Sep 2010 Location: Commerce, GA Posts: 3,873	Good Lord!!! Nice __________________ My Build Thread!

02-23-2011, 12:11 AM	#14
Thrasherman Support the NRA Drives: C6 Corvette Vert/08 Silverado Crew Join Date: Sep 2008 Location: Home Sweet Home Posts: 28	thats one ANGRY stang! Nice Job... __________________ Currently looking for something.. 13 Jeep JKU-lift, tires, rims, light bars, etc 12 Pruis V 08 Silverado CC LTZ 06 Corvette Convert-blower,cam,headers,wheels-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sweaver's Livernois LSX KB 3.6 Build	Chris@Livernois	Forced Induction - V8	99	08-15-2011 12:00 AM
Livernois Motorsports L99 & LS3 Camshaft/Header/CAI Package	Chris@Livernois	Engine Internals	10	02-13-2011 02:29 PM
Livernois Shelby GT1000R on the Dyno	Chris@Livernois	General Automotive + Other Cars Discussion	15	08-21-2010 05:14 PM
Updated Photos of Livernois 2010 Camaro GFX	Chris@Livernois	Camaro Photos \| Spyshots \| Video \| Media Gallery	26	07-26-2010 02:17 PM
Livernois Built Shelby Steet Car runs 9's! Slip Inside	Chris@Livernois	Off-topic Discussions	1	10-23-2009 05:40 PM

02-17-2011, 02:37 PM	#2
Scrappy Doo Drives: Callaway Rogue Join Date: Jul 2009 Location: W8n 4 Snow, Minnesota Posts: 4,731	How fast is directly proportional to how big a check to write! It's a great looking car Rick. I couldn't imagine trying to even drive it.... LOL

02-17-2011, 03:24 PM	#3
WadeWilson How U Doin? Drives: 2014 CTS-V Coupe Join Date: Oct 2008 Location: Californication Posts: 24,154 View My Garage	That car looks like it's hell on wheels!

02-17-2011, 07:57 PM	#5
Outlaw77 Drives: 2018 Charger SRT 392 F8 Green Join Date: Aug 2010 Location: Oakville Ontario, Canada Posts: 1,910	thats one hot stang!

02-18-2011, 12:14 PM	#8
Scrappy Doo Drives: Callaway Rogue Join Date: Jul 2009 Location: W8n 4 Snow, Minnesota Posts: 4,731	I know if I have to ask, I can't afford it. But, what would it take to get 1 of these?

02-18-2011, 12:30 PM	#9
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040 View My Garage