Share your Gaming Rigs!

JMCB1001 · 09-04-2021, 05:57 PM

Any other PC gamers here? Share your rig!

davidscamaro · 10-31-2021, 06:17 PM

Old hardware but still gets the job done

I7 6700K
GTX 980Ti
16GB DDR4
Evo pro 1TB m.2 SSD

SwL_Wildcat · 10-03-2023, 06:10 AM

My office when I put it together.

chevy pilot · 10-03-2023, 06:49 AM

Quote:

Originally Posted by SwL_Wildcat

My office when I put it together.

Very nice.

Davescamaro · 01-15-2024, 08:07 PM

Not the best setup as of yet..

i5 12600k, 3060ti, 32gb DDR4, more to list, but good starter

Davescamaro · 01-29-2024, 08:41 PM

Bump...
I got a set of rudder pedals for flight sim finally. Upgrading the GPU to a gently used 3080. Should notice alot more fps.

*SSE 4 2SS* · 06-15-2024, 02:54 AM

Just getting mine together after building a desk and hutch for it.

This is the basic build for my Alienware..
Name: IMG_3375.jpg
Views: 245
Size: 371.7 KB

An overall view including the surprise Alienware chair my bride got for me. This was prior to installing any flight or race sim controllers.
Name: IMG_3459.jpg
Views: 227
Size: 215.7 KB

Name: IMG_3459.jpg
Views: 227
Size: 215.7 KB

This is getting closer. I've actually downloaded Flight Sim 2020, and have a couple of sessions on it.. The learning curve of the controls is a bit steep. Seat time as they say....
Name: IMG_3259.jpg
Views: 233
Size: 193.9 KB

Name: IMG_3259.jpg
Views: 233
Size: 193.9 KB

The pin in the center of the fascia board is a 50 Year Anniversary Pin for EMS in LA county. I received that and photos of Gage, Desoto, and the actual original members of the LA county EMS, for which the show was based. We are talking badge #003 and 006. I'm a retired FF/Paramedic and Jim sent these to me due to our mutual interest. The Holy Water is a bottle my mom got from the church and brought to Florida as I was being flown back into the country from Trinidad where I suffered a massive heart attack offshore on a drill ship sailing away from Trinidad towards the Gulf of Mexico. I was unconscious for over two weeks and in the hospital 59 days, beginning on Oct 31, (Halloween) of 2017. I got released on Dec 29.
Name: IMG_3260.jpg
Views: 255
Size: 189.0 KB

Name: IMG_3260.jpg
Views: 255
Size: 189.0 KB

My dad and oldest brother and I were fans of the Labonte Brothers, being from central /south Texas. I saw them on the short tracks of south Texas well before they were nationally known. The Camaro is a piece by a local artist that I won in an auction at a fund raiser for a girls school, held by the San Antonio Camaro Club.
Name: IMG_3454.jpg
Views: 236
Size: 350.4 KB

Name: IMG_3454.jpg
Views: 236
Size: 350.4 KB

The last image is of B-17's from WWII. My grandfather flew about every multi-engine plane in the US arsenal. He was a pilot before and after the war. I have the complete set of B-24 Liberator Pilot manuals as were issued to him during training. One original was lost and was replaced so his signature isn't in it. I'll probably leave them an aviation museum some day. I have electronic copies of one of his WWII pilot logs. My brother has the original and scanned the pages. It started about 4000 hours and went up well over 6000 hours. He flew General Omar Bradley and staff across North Africa numerous times. I'm currently looking for a decent B-24 image to frame and add to the collection.
Name: IMG_3458.jpg
Views: 453
Size: 213.0 KB

Name: IMG_3458.jpg
Views: 453
Size: 213.0 KB

Trickskier · 06-15-2024, 04:18 AM

Quote:

Originally Posted by SSE 4 2SS

The last image is of B-17's from WWII. My grandfather flew about every multi-engine plane in the US arsenal. He was a pilot before and after the war. I have the complete set of B-24 Liberator Pilot manuals as were issued to him during training. One original was lost and was replaced so his signature isn't in it. I'll probably leave them an aviation museum some day. I have electronic copies of one of his WWII pilot logs. My brother has the original and scanned the pages. It started about 4000 hours and went up well over 6000 hours. He flew General Omar Bradley and staff across North Africa numerous times. I'm currently looking for a decent B-24 image to frame and add to the collection.
Attachment 1152731

That's Awesome! Thanks for sharing!

*SSE 4 2SS* · 06-25-2024, 12:59 AM

I finally got my hutch lights installed. I'm working on adjusting the color of the Alienware items like the ring, the power button and the fans to match it.
In person, the lights are not as harsh and the hats are lit up clearly.

FarmerFran · 07-05-2024, 08:11 AM

I just built...will try and get pics. My desk setup is pretty basic.

i9-14900K
Gigabyte Z790 Aorus Master X Motherboard
64GB Trident Z5 PC5-6000
Gigabyte RTX4090
Samsung 2TB 990Pro m2
Pop XL Air Case
RMx Shift 1200W power
iCUE H150i Elite LCD cooling
Logitech Z906 5.1 Surround
Logitech G903 Mouse
Logitech G910 Keyboard

all that on an
Alienware 32" 4K OLED (3840x2160 240Hz)

*SSE 4 2SS* · 07-06-2024, 10:21 PM

Quote:

Originally Posted by FarmerFran

I just built...will try and get pics. My desk setup is pretty basic.

i9-14900K
Gigabyte Z790 Aorus Master X Motherboard
64GB Trident Z5 PC5-6000
Gigabyte RTX4090
Samsung 2TB 990Pro m2
Pop XL Air Case
RMx Shift 1200W power
iCUE H150i Elite LCD cooling
Logitech Z906 5.1 Surround
Logitech G903 Mouse
Logitech G910 Keyboard

all that on an
Alienware 32" 4K OLED (3840x2160 240Hz)

Very nice… love the “FarmerFran” logo…

Indian_Mack · 07-07-2024, 12:30 PM

Not a pc setup, but I've got my xbox series x, soundbar and 27" monitor mounted in a chest so it can be easily hidden. Wife, of course gets the wall mounted tv for multiplayer, but when I lay flat and get close, it's just as good

(Old pic showing the series s)

09-04-2021, 05:57 PM	#1
JMCB1001 Drives: 2018 Chevrolet Camaro ZL1 A10 Join Date: May 2019 Location: Las Vegas, NV Posts: 25	Share your Gaming Rigs! Any other PC gamers here? Share your rig! Attached Images __________________

10-31-2021, 06:17 PM	#2
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 857	Old hardware but still gets the job done I7 6700K GTX 980Ti 16GB DDR4 Evo pro 1TB m.2 SSD Attached Images __________________ BIG cam ...... 305 45 18 Mickys ...... BMR suspensions

01-15-2024, 08:07 PM	#5
Davescamaro Drives: Chevy camaro Join Date: Jul 2019 Location: North Carolina Posts: 203	Not the best setup as of yet.. i5 12600k, 3060ti, 32gb DDR4, more to list, but good starter __________________ 2019 Camaro 1 LT 2.0 Riverside Blue Metallic, ZZP strut bar, K&N intake, ZZP catted DP, MRT axle back, Injen IC piping, Trifecta Elite tune, zzp heat shield, turbosmart diverter valve. Knockoff zl1 sideskirts, gm front chin spoiler, 1le blade spoiler, diode sides, 20" staggered Asanti black labels, azenis 510 245/40/20 fronts, nitto 555 g2s 275/35/20 rears. Last edited by Davescamaro; 01-15-2024 at 08:31 PM.

01-29-2024, 08:41 PM	#6
Davescamaro Drives: Chevy camaro Join Date: Jul 2019 Location: North Carolina Posts: 203	Bump... I got a set of rudder pedals for flight sim finally. Upgrading the GPU to a gently used 3080. Should notice alot more fps. __________________ 2019 Camaro 1 LT 2.0 Riverside Blue Metallic, ZZP strut bar, K&N intake, ZZP catted DP, MRT axle back, Injen IC piping, Trifecta Elite tune, zzp heat shield, turbosmart diverter valve. Knockoff zl1 sideskirts, gm front chin spoiler, 1le blade spoiler, diode sides, 20" staggered Asanti black labels, azenis 510 245/40/20 fronts, nitto 555 g2s 275/35/20 rears.

06-15-2024, 02:54 AM	#7
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,656	Just getting mine together after building a desk and hutch for it. This is the basic build for my Alienware.. An overall view including the surprise Alienware chair my bride got for me. This was prior to installing any flight or race sim controllers. This is getting closer. I've actually downloaded Flight Sim 2020, and have a couple of sessions on it.. The learning curve of the controls is a bit steep. Seat time as they say.... The pin in the center of the fascia board is a 50 Year Anniversary Pin for EMS in LA county. I received that and photos of Gage, Desoto, and the actual original members of the LA county EMS, for which the show was based. We are talking badge #003 and 006. I'm a retired FF/Paramedic and Jim sent these to me due to our mutual interest. The Holy Water is a bottle my mom got from the church and brought to Florida as I was being flown back into the country from Trinidad where I suffered a massive heart attack offshore on a drill ship sailing away from Trinidad towards the Gulf of Mexico. I was unconscious for over two weeks and in the hospital 59 days, beginning on Oct 31, (Halloween) of 2017. I got released on Dec 29. My dad and oldest brother and I were fans of the Labonte Brothers, being from central /south Texas. I saw them on the short tracks of south Texas well before they were nationally known. The Camaro is a piece by a local artist that I won in an auction at a fund raiser for a girls school, held by the San Antonio Camaro Club. The last image is of B-17's from WWII. My grandfather flew about every multi-engine plane in the US arsenal. He was a pilot before and after the war. I have the complete set of B-24 Liberator Pilot manuals as were issued to him during training. One original was lost and was replaced so his signature isn't in it. I'll probably leave them an aviation museum some day. I have electronic copies of one of his WWII pilot logs. My brother has the original and scanned the pages. It started about 4000 hours and went up well over 6000 hours. He flew General Omar Bradley and staff across North Africa numerous times. I'm currently looking for a decent B-24 image to frame and add to the collection. __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...

10-03-2023, 06:10 AM	#3
SwL_Wildcat Drives: 2024 ZL1 Join Date: Apr 2023 Location: Campbell River, BC, Canada Eh! Posts: 388	My office when I put it together.

06-25-2024, 12:59 AM	#9
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,656	I finally got my hutch lights installed. I'm working on adjusting the color of the Alienware items like the ring, the power button and the fans to match it. In person, the lights are not as harsh and the hats are lit up clearly. Attached Images __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...

07-05-2024, 08:11 AM	#10
FarmerFran Drives: 2023 ZL1 Vert M6 "Sharky" Join Date: Mar 2020 Location: Earth Posts: 4,155	I just built...will try and get pics. My desk setup is pretty basic. i9-14900K Gigabyte Z790 Aorus Master X Motherboard 64GB Trident Z5 PC5-6000 Gigabyte RTX4090 Samsung 2TB 990Pro m2 Pop XL Air Case RMx Shift 1200W power iCUE H150i Elite LCD cooling Logitech Z906 5.1 Surround Logitech G903 Mouse Logitech G910 Keyboard all that on an Alienware 32" 4K OLED (3840x2160 240Hz) Attached Images __________________ 2023 Camaro ZL1 Vert TR-6060 Sharkskin "Sharky" Firecracker Red Wrangler Willys, 3.6L eTorque, 850RE 8 speed automatic, 25W Willys package, Technology Group, Convenience Group (aka $600 garage door opener), Cold weather Group, Trailer Tow and HD electric group with AUX switches, 3 piece black freedom top.

07-07-2024, 12:30 PM	#12
Indian_Mack Drives: 2013 Chevy Camaro 1LT Join Date: May 2022 Location: Lacey, Wa Posts: 100	Not a pc setup, but I've got my xbox series x, soundbar and 27" monitor mounted in a chest so it can be easily hidden. Wife, of course gets the wall mounted tv for multiplayer, but when I lay flat and get close, it's just as good (Old pic showing the series s)