03-03-2021, 01:00 PM | #43 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
03-03-2021, 02:12 PM | #44 |
waiting at the tree
Drives: SIM 2010 2SS/RS A6 Join Date: Apr 2013
Location: Niagara Falls
Posts: 3,263
|
I took it off as others have said its a giant heat soak.
Next up is the faux second intake manifold cover....another heat soak.
__________________
2010 2SS/RS A6 ZL1 Rims
60ft 2.03 13.08 at 107.82 (4/28) 2009 Pontiac G8 3.6L the DD |
03-03-2021, 07:57 PM | #45 | |
Drives: 2010 Camaro SS/RS CGM Join Date: Dec 2011
Location: Oskaloosa, IA
Posts: 628
|
Quote:
It is also a very awesome looking intake. It does not get the air from a scoop but u have to tilt the radiator back. Massive negatives are with the radiator tilted back air come back from the hood and bows the hood at 80+ mph. Not fun. Another negative is using a stock radiator with fill line in the middle means half the intake is only being used since the radiator suppor blocks alot of incoming air. So if u want the full advantage u have tonget a radiator with fill tube on the side. Very expensive and custom anymore. |
|
03-05-2021, 04:10 PM | #46 |
Drives: 13' 1LE Join Date: Apr 2012
Location: Canada
Posts: 2,643
|
Throw it in the garbage. Real engine looks better. Get your manifold painted and colored spark plug wires. I guess it heatsoaks engine too.
__________________
13' 1LE
Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. |
03-05-2021, 08:01 PM | #47 |
Drives: 2013 Camaro 2SS/RS Join Date: Aug 2020
Location: Pacific Northwest
Posts: 802
|
Okay, I ripped it off of the engine and put it into the trunk for safe keeping. I do not notice any change in noise from under the hood.
|
03-06-2021, 05:33 AM | #48 | |
waiting at the tree
Drives: SIM 2010 2SS/RS A6 Join Date: Apr 2013
Location: Niagara Falls
Posts: 3,263
|
Quote:
That cover is a beauty shield that holds in a lot of engine heat in Why do you think it removes with no tools? because its not necessary
__________________
2010 2SS/RS A6 ZL1 Rims
60ft 2.03 13.08 at 107.82 (4/28) 2009 Pontiac G8 3.6L the DD |
|
03-06-2021, 07:32 AM | #49 |
Drives: 2013 Camaro 2SS/RS Join Date: Aug 2020
Location: Pacific Northwest
Posts: 802
|
|
03-06-2021, 07:37 AM | #50 |
It don’t come easy.
|
Supercharged.
__________________
|
03-06-2021, 08:52 AM | #51 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
These engine bays are awesome. I kept thinking about putting mine on here but just haven't until now.
__________________
|
03-06-2021, 02:11 PM | #52 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
BLU, THAT is as I have said before, a very stunning work of art!!!!!!!!! Absolutely awesome!!
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
03-06-2021, 05:31 PM | #53 | |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Quote:
Going to be in the low 60 this coming next week.
__________________
|
|
03-07-2021, 08:22 AM | #54 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
^^^^^^^^ lol, getter out for a ride!! Get that spoiler installed too!!
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
03-07-2021, 09:39 AM | #55 |
Drives: 2013 Camaro 2SS/RS Join Date: Aug 2020
Location: Pacific Northwest
Posts: 802
|
I notice a bar in the 5th photo side to side toward the back which I believe has something to do with torque or twist prevention? "Some cars have them and some do not. Is it a mod?
|
03-07-2021, 10:35 AM | #56 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
The bar that connects the 2 strut towers?? That is the strut tower brace that comes on the verts from the factory to strengthen the chassis. You can get one for the coupes and install it, and it actually does stiffen up the front. I noticed the difference right away after my install..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|