CHEVY needs to fire this person! - Page 3

17MaroSS · 01-19-2021, 04:14 PM

Maybe it's a subtle statement from GM, moving the classically centered Bowtie to the right. They would rather file for bankruptcy than move it to the left. (Shh)

Paintslinger16 · 01-19-2021, 04:42 PM

I think the wind caught it and it slid over there

Number 3 · 01-19-2021, 06:32 PM

Quote:

Originally Posted by BlackbeastSS2

Off topic: I find nothing wrong with my 2019 but I have totally taken off all my emblems.

Back on topic: The fire the person thing is humour for those that can’t tell.

It’s the internet. With no winky face even sarcasm, let alone humor, is indistinguishable.

FarmerFran · 01-19-2021, 06:43 PM

Quote:

Originally Posted by 17MaroSS

Maybe it's a subtle statement from GM, moving the classically centered Bowtie to the right. They would rather file for bankruptcy than move it to the left. (Shh)

Uhhh, Unless I am misunderstanding you, they did move it Left.

arpad_m · 01-19-2021, 06:48 PM

Quote:

Originally Posted by FarmerFran

Uhhh, Unless I am misunderstanding you, they did move it Left.

Oui, far left. Let's hope it was done to improve engine cooling, though

Hard to tell from the picture, but it looks as if the bowtie were made to sit on a grille node that blocks air flow already.

17MaroSS · 01-19-2021, 07:33 PM

Quote:

Originally Posted by FarmerFran

Uhhh, Unless I am misunderstanding you, they did move it Left.

I meant if you are looking at it from the outside, the way it appears in pictures.

3.8TransAM · 01-19-2021, 07:50 PM

People are worried about the person who put the emblem there when they should be wanting to beat the hell out of whoever designed the front end...................

driven2exceSS · 01-19-2021, 08:11 PM

IMO they could of molded the "flow tie" into the "Chevrolet background plastic" ...And maybe even enlarged it some, and made it into an OEM Ram-air intake snorkel while at it!!

MackSteelPrivateEye · 01-20-2021, 12:56 AM

Quote:

Originally Posted by BlackbeastSS2

CHEVY needs to fire this person!

Ok I thought the SS emblem placement on the rear of the GEN 6 Camaro was bad and not to mention the mistake of putting the Chevy bow tie time in a bad spot on the 2019 Camaro SS front bumper. Now this takes the cake, the 2021 Colorado pickup truck placement of the Chevy bow tie is so bad it’s laughable. The person that suggested this placement and the who ever approved the final draft should be fired IMO. Okay I am kidding about being fired but what a bad spot for it, you might as well stand in front of truck blindfolded and toss a dart for location of bow tie.

I think they should be fired for making a 4 door Pickup Truck, or at least not making a 2 door be available. Also should be fired for not having a manual trans avail.

ssmike · 01-20-2021, 07:52 AM

My OCD is killing me right now! lol! I like symmetry. That bowtie needs to be centered

arpad_m · 01-20-2021, 01:12 PM

Quote:

Originally Posted by ssmike

My OCD is killing me right now! lol! I like symmetry. That bowtie needs to be centered

In all honesty, though, it's only our perception, as we are so deeply accustomed to seeing the bowtie in the middle. The SS and ZL1 badges are in almost he exact same position on our cars, yet very few owners have any issue with them.

cellsafemode · 01-20-2021, 01:23 PM

it's got Chevrolet in big writing _AND_ a logo right under that. How much advertising do you need to pay for in case anyone was confused who makes your truck?

it's gotta be acceptable to the market since that kind of stuff sells. Tackiness is not a factor.

I dont think removing it is the answer, it needs another bowtie on the other side. And i hope to god it has "COLORADO" in the windshield tint strip so you never forget what kind of truck you have or anyone else looking at it and confusing it with some other kind of truck.

Clearly_Canadian · 01-20-2021, 01:25 PM

My OCD is PINNED!!!!!

UnknownJinX · 01-20-2021, 02:57 PM

Quote:

Originally Posted by MackSteelPrivateEye

I think they should be fired for making a 4 door Pickup Truck, or at least not making a 2 door be available. Also should be fired for not having a manual trans avail.

Manual trans is the exception, not the norm for pickup trucks. Only 3 pickup trucks have them, and the Frontier one feels more like an afterthought and cost reduction option while Toyota and Jeep offer them as a way to please the enthusiasts.

https://www.motorbiscuit.com/only-th...-transmission/

01-19-2021, 08:11 PM	#36
driven2exceSS Drives: 2016 2SS BLK A8 Vert Join Date: Dec 2017 Location: MA Posts: 1,040	IMO they could of molded the "flow tie" into the "Chevrolet background plastic" ...And maybe even enlarged it some, and made it into an OEM Ram-air intake snorkel while at it!! __________________ NPP, MRC, Tinted side & rear reflectors, OEM ZL1 Rockers / 3rd Brake / Darken tail lights, OEM Blk rear splash guards, Satin hood wrap, Fuse pull, Sound tube delete, Cat delete, Ported 95 TB, Ported MSD IM, Dry RotoFab, ARH 1 7/8 headers, E85, "Performance Dyno" Tune, BMR "pieces", "Track" alignment, Hawk DCT-70/70's w/SRF, Goodridge lines, Ti shims, Red powdered calipers, 18" APEX SM-10's w/ Pirelli DH's, FE4 Vert swaybars, Brake cooling ducts, ATI 10% UD, Vorshlag camber plates, OEM 1LE Splitter w/APR Ext., Velossa BIG MOUTH Ram Air, CF QA1, ZLE brakes(F)

01-20-2021, 01:23 PM	#40
cellsafemode Drives: 2016 Camaro 1LT Join Date: Jan 2016 Location: California Posts: 3,522	it's got Chevrolet in big writing _AND_ a logo right under that. How much advertising do you need to pay for in case anyone was confused who makes your truck? it's gotta be acceptable to the market since that kind of stuff sells. Tackiness is not a factor. I dont think removing it is the answer, it needs another bowtie on the other side. And i hope to god it has "COLORADO" in the windshield tint strip so you never forget what kind of truck you have or anyone else looking at it and confusing it with some other kind of truck. Last edited by cellsafemode; 01-20-2021 at 01:35 PM.

01-20-2021, 01:25 PM	#41
Clearly_Canadian Drives: 2017 2SS Camaro Join Date: Mar 2015 Location: British Columbia Posts: 366	My OCD is PINNED!!!!! __________________ 2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.

01-19-2021, 04:14 PM	#29
17MaroSS Drives: 17 2SS 6sp Join Date: Jun 2020 Location: Bad Roads, North Jersey Posts: 186	Maybe it's a subtle statement from GM, moving the classically centered Bowtie to the right. They would rather file for bankruptcy than move it to the left. (Shh)

01-19-2021, 07:50 PM	#35
3.8TransAM Drives: SS 1LE, 89 TTA, 91 GTA, 91 Formula Join Date: Jul 2019 Location: NW IN Posts: 600	People are worried about the person who put the emblem there when they should be wanting to beat the hell out of whoever designed the front end...................

01-20-2021, 07:52 AM	#38
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,841	My OCD is killing me right now! lol! I like symmetry. That bowtie needs to be centered