Squirrelly - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

flht99b · 12-24-2020, 11:36 AM

The trailing arm bushing in the rear knuckles, if worn will cause the car to sway on accel and decel. BMR sells good Poly bushings for the trailing arm attachment in the rear knuckles, even have a brand new set at home as spares. BMR bushings in my car are at least 7 years old and working perfectly. Key is the right silicone grease and maintenance.

BMR Sales · 12-28-2020, 03:30 PM

Quote:

Originally Posted by anth331

Problem solved!!! I put BMR Toe Rods, Trailing Arms, and rear sway bar on it. Now no matter how fast I’m going, stomp on the brakes. It stays straight and true. No moving around.

12-24-2020, 11:36 AM	#29
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	The trailing arm bushing in the rear knuckles, if worn will cause the car to sway on accel and decel. BMR sells good Poly bushings for the trailing arm attachment in the rear knuckles, even have a brand new set at home as spares. BMR bushings in my car are at least 7 years old and working perfectly. Key is the right silicone grease and maintenance. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.