03-07-2018, 10:31 AM | #127 |
SS
|
285 squared is the route i believe now for road course/autox is the best and safest for these wheels 19x10 ccw on route 15mm and 21 mm offsets my thoughts now are on which tire dia for fender clearance as my ridetech coil overs are still on a 10" spring which requires a 6.1 back space(15mm offset)
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow catsLocks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings
|
03-07-2018, 10:58 AM | #128 |
36.58625, -121.7568
|
Pete, you can't be posting pictures of a camaro losing to a mustang on here.
|
03-20-2018, 02:44 PM | #129 |
Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
I have 19X10 CCW's with 285 bridgestone RE-71's. Car is lowered over an inch - no issues with fender clearance. These are my street setup.
Plenty of Issues with clearing speed bumps however... I avoid them like the plague. |
03-23-2018, 09:46 PM | #130 |
SS
|
My wheels arrived so light!,offsets are different for the better CCW 10" 15 and 33 offsets.
i need to polish the rears to match the front sets highly polished finsih but they are new and with a 10mm spacer up front I can run the 305 30 19 set up and will probably after my 285 35 19 re-71s are worn, my wheel calculator actually specd 9.5" wheel minimum for that tire not that it is correct over the manufacturer
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow catsLocks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings
|
03-28-2018, 11:32 AM | #131 |
Drives: ‘17 1LE, ‘17 BMW 340, ‘18 F-150 Join Date: Nov 2017
Location: Calgary, AB
Posts: 238
|
My tire shop is having a heck of a time mounting 305/30/19 RE71R's onto my front 19x10 Forgestar CF5's, they just can't get the bead to seal but I know for a fact they fit as these are the exact wheels that came off of an autocrossed SS 1LE running the same tires.
Bretts are you in Calgary or Edmonton? Any plans on autocrossing with the SASC this year? I had my Koni's custom valved by TrueChoice and they actually run a lower N2 pressure than you'd think, arguably just enough to prevent cavitation of the oil. I spoke with their engineer as I too was surprised by this decision as I thought in a street class car you'd want to do anything you can to increase spring rate and running high N2 pressure is one way of doing that, but in their testing on the Koni twin tube's that the best set up and it does result in a slight reduction in ride height.
__________________
2017 - SS 1LE
2015 - 2SS, RS, NPP, 1LE - Sold |
03-28-2018, 06:55 PM | #132 |
SS
|
94 boosted I am on the Sask Alberta border 3 hrs from the badlands site underway 2.5 hrs to Red Deer where i get a few runs in, definitely interested in doing some drop ins with you guys a buddy runs with you guys I believe. My tire guy has no problems with the 305 30 19 in terms of doing it for me, might have to as mid June currently for the 285 set up , will be a big step as would probably get new hubs for the extended studs that i would need to clear front suspension via spacers
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow catsLocks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings
|
03-28-2018, 07:39 PM | #133 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
Not every machine works well with low profile stiff sidewall tires. Shop around.
|
03-28-2018, 07:43 PM | #134 |
Drives: 2018 Camaro ZL1 Join Date: Jun 2011
Location: Morgan, UT
Posts: 1,359
|
My tire guy had quite a bit of trouble with my RE71s on OEM Z/28 wheels. They specialize in high end Porsches, lambos, etc do they are no strangers to wide, low profile rubber.
Sent from my iPhone using Tapatalk
__________________
|
03-28-2018, 10:21 PM | #135 | |
Drives: ‘17 1LE, ‘17 BMW 340, ‘18 F-150 Join Date: Nov 2017
Location: Calgary, AB
Posts: 238
|
Quote:
__________________
2017 - SS 1LE
2015 - 2SS, RS, NPP, 1LE - Sold |
|
03-28-2018, 11:31 PM | #136 |
SS
|
Don has a charcoal 16 ss but broke something so year off and sounds good!
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow catsLocks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings
|
03-30-2018, 07:05 PM | #137 | ||
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
Quote:
|
||
|
|
|
|