PWA 3: Dark of the Lounge

[shank0668]

Originally Posted by Nvincent4708

if he can build a SBC.. he can build an LS.. simple as that.

only main difference is the valvetrain setup.

tuning.. too. you need a laptop haha

He's rebuilt a 350 so he's good then, lol.

Tuning... that's what i am concerned about. I am mainly concerned with the whole cost factor of this entire build.

[SinisterEcho]

Originally Posted by aSSian

Fml, you of all people should know that quote. Hand over your Asian card.

Conair...one of the best movies ever.

Great movie!

Originally Posted by 2010 SSRS

mini Gracie

Originally Posted by Tessa

I haven't seen it is ages

This

Originally Posted by aSSian

It has to be on tv every other weekend. Lmao

I no has TV.....

[Nvincent4708]

Originally Posted by shank0668

He's rebuilt a 350 so he's good then, lol.

Tuning... that's what i am concerned about. I am mainly concerned with the whole cost factor of this entire build.

rebuilt? Please, Please, PLEASE! do not use plastigauge on this engine.

tuning can be done relatively cheap if you know someone with HPtuners.

what is your budget?

[Nvincent4708]

Originally Posted by aSSian

Fml, you of all people should know that quote. Hand over your Asian card.

Conair...one of the best movies ever.

never saw it

[shank0668]

Originally Posted by Nvincent4708

rebuilt? Please, Please, PLEASE! do not use plastigauge on this engine.

tuning can be done relatively cheap if you know someone with HPtuners.

what is your budget?

Plastigauge?

I would like to be around $6500 for my entire ls1/T56 swap. That's what I figured to rebuild my 455 and put a 4 speed in.

[Nvincent4708]

Originally Posted by shank0668

Plastigauge?

I would like to be around $6500 for my entire ls1/T56 swap. That's what I figured to rebuild my 455 and put a 4 speed in.

plastigauge is a way of measuring engine parts.. definitely not suitable for high performance builds..many kaboom factors will happen.

and 6500. tight budget.

how much do you think you can find a trans for?

[2010 SSRS]

[2010 SSRS]

[shank0668]

Originally Posted by Nvincent4708

plastigauge is a way of measuring engine parts.. definitely not suitable for high performance builds..many kaboom factors will happen.

and 6500. tight budget.

how much do you think you can find a trans for?

$1500ish. I was just thinking stock rebuild, maybe even a cam.

[SinisterEcho]

Originally Posted by 2010 SSRS

[Nvincent4708]

Originally Posted by shank0668

$1500ish. I was just thinking stock rebuild, maybe even a cam.

bore .020-.030 over.. use same rotating assembly minus pistons/rings/bearings.

new cam, springs, retainers and such.

should only run you 2500-3 for all that. and push 450 wheel pretty damn easily.

[shank0668]

Originally Posted by Nvincent4708

bore .020-.030 over.. use same rotating assembly minus pistons/rings/bearings.

new cam, springs, retainers and such.

should only run you 2500-3 for all that. and push 450 wheel pretty damn easily.

I'd be pretty happy with 350 to the wheels

I am hoping it won't need machine work... That is if I can buy it.

This will be a long term project.

[2010 SSRS]

[SinisterEcho]

Now they stole my damn chair.... srsly..... WTF?!