04-26-2019, 10:24 PM | #1 |
Drives: 2015 1SS/RS M6 Join Date: Oct 2010
Location: Johnston, R.I.
Posts: 180
|
Wheel and tire fitment?
So I’ve recently decided to get the mrr m017 1le replica wheel. I’m thinking 275/35/20 front and 305/35/20 for the rear. I’ve seen conflicting reports on various widths particularly with the rear set up. Should I go 315? Definitely do not want to modify anything or have any rubbing or bumping issues. anyone running this setup or can share some knowledge ? Pics are great as well!
|
04-27-2019, 09:29 AM | #2 |
Drives: 2015 1SS/RS M6 Join Date: Oct 2010
Location: Johnston, R.I.
Posts: 180
|
Anyone?
|
04-27-2019, 09:59 AM | #3 |
Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010
Location: Clermont, IN
Posts: 3,297
|
If in doubt....dont do it.
__________________
2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419.
Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!! |
04-27-2019, 11:35 AM | #4 |
Drives: Miss Con Ception Join Date: Aug 2016
Location: Chicagoland
Posts: 2,998
|
315/30X20 will be almost exactly the same radius as 275/35s.
Many here have run 315s but you need at least a 10.5" rim with the correct offset.
__________________
2011 1SS/RS LS3 CGM
|
04-27-2019, 12:16 PM | #5 |
Drives: 2015 SW 2SS 1LE Join Date: Jan 2018
Location: 78155
Posts: 308
|
285/35/20 and 315/35/20's with no issues.
__________________
Maggie 2650 @ 18psi/ 75mm 10 rib/ Dual alky nozzles/ Roto-fab/ ARH 2" Lt's/ GT-12 cam/ ZL1 3.23 Conv./MGW/RPS triple carbon clutch/RSG tranny upgrage/Pedders Ex. XA w/ remote cans and a lot of other crap 897/8??@tires
|
|
|
|
|