Anyone have a set of stock strut mounts? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nutro · 01-26-2018, 03:46 PM

I bought some Bilstein coilovers and want to install them. It would be much easier if I had some stock top hats that the strut/coilover mount into. That way, I can just assemble the coilover out of the car and simply unbolt the current assembly and install the new.

Does anyone have a set of stock top hats they'd sell me?

hp junkie · 02-04-2018, 01:57 PM

I have a set, just took factory struts off. 50K miles, pm me an offer. I take a pic

AG1LE · 02-04-2018, 02:03 PM

I have a set of stock spring top hats that came with my Moreno Motorsports camber plates, but I won't be using them. Not sure whether that would meet your needs.

Irace16 · 02-04-2018, 04:24 PM

Advanced auto carries them

olblue75 · 02-04-2018, 10:24 PM

Fronts or rears?

Nutro · 02-05-2018, 06:05 PM

Fronts and rears or just the fronts

01-26-2018, 03:46 PM	#1
Nutro Drives: 2011 2SS Synergy Green Join Date: Nov 2011 Location: Austin, Texas Posts: 3,670	Anyone have a set of stock strut mounts? I bought some Bilstein coilovers and want to install them. It would be much easier if I had some stock top hats that the strut/coilover mount into. That way, I can just assemble the coilover out of the car and simply unbolt the current assembly and install the new. Does anyone have a set of stock top hats they'd sell me? __________________ L99 With a Maggie

02-04-2018, 01:57 PM	#2
hp junkie Drives: 2010 2SS/RS CGM Join Date: Apr 2010 Location: Waukesha, Wi Posts: 129 View My Garage	I have a set, just took factory struts off. 50K miles, pm me an offer. I take a pic __________________ 2010 2SS M6 CGM LMR cold air, texas speed underdrive pulley and complete stainless exhaust 17/8 headers coated, comp LSR cam, push rods and trunion upgrade, norris catch can, prothane engine mounts, pfadt coilovers, BMR everything suspension, BMR four point strut, MGW billet shifter, barton pistol grip handle, AAC dome and footwell blue, all lights 25% tint, RKsport carbon inlay spoiler, powdercoated calipers, Stoptech stainless brake lines, Hawk HPS pads, West Bend Dyno tune 491rwhp and 465rwtq corrected.

02-04-2018, 04:24 PM	#4
Irace16 Drives: 2010 1SS RS M6 Join Date: Jan 2015 Location: Appleton, Wisconsin Posts: 521	Advanced auto carries them __________________ Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses

02-04-2018, 10:24 PM	#5
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,069	Fronts or rears? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

02-05-2018, 06:05 PM	#6
Nutro Drives: 2011 2SS Synergy Green Join Date: Nov 2011 Location: Austin, Texas Posts: 3,670	Fronts and rears or just the fronts __________________ L99 With a Maggie

02-04-2018, 02:03 PM	#3
AG1LE Drives: '14 1LE Join Date: Nov 2013 Location: NJ Posts: 2,435	I have a set of stock spring top hats that came with my Moreno Motorsports camber plates, but I won't be using them. Not sure whether that would meet your needs.