06-19-2017, 09:48 AM | #1 |
Drives: 2004 Z06, 2017 1LE Join Date: May 2017
Location: Indiana
Posts: 57
|
GM Part Number for 1LE Hood Wrap?
Guys, an unfortunate series of events has led to my car needing a new hood wrap. For insurance purposes, they're having a hard time finding a GM part for the wrap itself. I know it's a 3M vinyl, but does anyone know the actual GM replacement part number for insurance estimate purposes?
|
06-19-2017, 11:29 AM | #2 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,479
|
I don't believe it has a part number, I had issues with mine as soon as it came off the truck and the dealer spent like 2 weeks trying to coordinate with GM to have it repaired and never came up with a part number. Best I can tell you is you would be better off not messing with Insurance and just peeling the wrap off yourself and paying the $250-$300 to have it re-wrapped.
__________________
IG: @NC_M1SS1LE
|
06-19-2017, 12:35 PM | #3 |
Drives: 1SS-1LE Join Date: May 2017
Location: Lompoc, CA
Posts: 6
|
I am having mine redone in satin...the matte is just so difficult to maintain. Also everything else on car (mirrors, spoilers, etc) is already satin...should look good when done.
|
06-19-2017, 12:47 PM | #4 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,479
|
I would do that but all of the pics I've seen from people that have redone the hood in satin it looks like it doesn't match the painted satin pieces 100%. That would bug the shit out of me.
__________________
IG: @NC_M1SS1LE
|
06-19-2017, 02:17 PM | #5 |
Drives: 2004 Z06, 2017 1LE Join Date: May 2017
Location: Indiana
Posts: 57
|
Thanks. I was afraid there might not be a GM part yet. I like the matte finish and would like to keep it. I may just give a local vinyl place a call to see what they say.
|
06-19-2017, 02:33 PM | #6 |
Drives: 2004 Z06, 2017 1LE Join Date: May 2017
Location: Indiana
Posts: 57
|
Well, it looks like there is a part number for the wrap on the 15 and earlier 1LE.
http://www.gmpartsdirect.com/oe-gm/19299174 I wonder what you get with that? If it's just a big square that needs to be trimmed to fit, it might work on the later car with a smaller hood? |
06-19-2017, 04:01 PM | #7 |
Drives: 2016 Hyper Blue 2SS, A8, NPP Join Date: Nov 2016
Location: Groves, Texas
Posts: 90
|
Part number is 84106350. I can't tell you whether or not it is pre-cut but the number is the same for the SS & LT. Readily available and lists for $325.88.
__________________
Current stable:
2016 Hyper Blue 2SS 2001 Pewter Z28 Gone but not forgotten: 1978 Dark Blue-Green Z28 w/1970 LT1 power 1978 Bright Blue Z28 1976 Light Blue RS 1973 Green-Gold LT |
06-19-2017, 04:05 PM | #8 |
Drives: 2004 Z06, 2017 1LE Join Date: May 2017
Location: Indiana
Posts: 57
|
Excellent, Thanks!
|
06-19-2017, 04:37 PM | #9 |
Drives: SW 1SS 1LE / Jeep XJ Join Date: Mar 2016
Location: WPB,FL
Posts: 799
|
I've had a warranty replacement for the wrap, the OEM wrap I've read is just 3M matte black, My dealer had a guy come in and rewrap the hood without issue.
Mine was cut too short, almost looks like it came precut and they definitely do not remove the hood vents for wrapping which causes other issues (hood vents get bowed) |
06-19-2017, 04:54 PM | #10 |
Drives: 2017 1SS Join Date: Aug 2016
Location: Wauconda, IL
Posts: 164
|
Unfortunately this isn't pre-cut, the ZL1 1LE uses the same part number as well. It comes on a big sheet
|
06-25-2017, 07:43 AM | #11 |
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Saw a base 2LT that a local dealership tried to wrap to make into a "wannabe 1LE".
It was that bright krypton green, and they did not take the wrap around the edges to where you saw green around the edges. Looked awful, especially near the wipers at the base of the windshield. As a driver, you'd see that all the time! Whatever happens, make sure you have a good installer who takes it around all the edges like the stock application...and removes the hood vents before hitting with heat gun. |
06-25-2017, 06:52 PM | #12 |
Drives: 2017 1LE SS Join Date: May 2014
Location: Las Vegas, NV
Posts: 621
|
How are you guys maintaining the wrap? I purchased the stuff from Adams, and it does ok but I'd really like a nice even coating. Always ends up a little streaky
__________________
'If one day the speed kills me, don't cry. Because I was smiling.' - Paul Walker
|
06-25-2017, 10:47 PM | #13 | |
Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Denver
Posts: 1,620
|
Quote:
Looks good and doesn't streak.
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
|
06-26-2017, 12:37 AM | #14 |
Drives: 2017 1LE SS Join Date: May 2014
Location: Las Vegas, NV
Posts: 621
|
Thanks , I'll give it a shot
__________________
'If one day the speed kills me, don't cry. Because I was smiling.' - Paul Walker
|
|
|
Post Reply
|
|
|