12-04-2014, 06:37 AM | #15 |
Thanks everyone. Feeling much batter about it now than last night. Now to find someone I'll have faith in.
|
|
12-04-2014, 12:25 PM | #16 |
Drives: ‘13 1LE Join Date: Jul 2013
Location: Earth
Posts: 3,904
|
|
12-04-2014, 03:40 PM | #17 |
|
Replace the fender, It'll cost about as much as a new one ti fix it lol
__________________
Life is short, drive it like you stole it! |
12-04-2014, 09:48 PM | #18 |
Go Vols!
Drives: 2011 Join Date: Feb 2012
Location: FL
Posts: 226
|
Yes it will PDR. Go by some high end dealers in the area and ask for a name/number. Everyone has a contact that will do the work. I had a guy that worked for Jaguar fix a a door of my scion that someone kicked with a size 13 boot. Words of the PDR guy lol. He charged me 120 and it came out perfect, much worse than your photo.
|
12-05-2014, 10:27 AM | #19 |
Reaper Crew
Drives: Blown 2010 Camaro SS Join Date: Aug 2012
Location: Indiana
Posts: 985
|
Unless you're an insanely good tech from another planet....that fender will never look 100% perfect using PDR. You'd be very surprised how damaged that fender is with a dent light on it. Not saying it's not possible to push...a good tech could probably make it a lot less noticeable, but it will never look like a new fender. Way to damaged from top to bottom.
__________________
2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers |
12-05-2014, 11:51 AM | #20 | |
Drives: ‘13 1LE Join Date: Jul 2013
Location: Earth
Posts: 3,904
|
Quote:
|
|
12-05-2014, 01:50 PM | #21 |
Reaper Crew
Drives: Blown 2010 Camaro SS Join Date: Aug 2012
Location: Indiana
Posts: 985
|
Yep. Not saying I'm the best dent guy on the planet but I've fixed some pretty narley stuff....this is a panel with many many crowns, low spots, eye brows....just distortion all over the place. I would attempt to PDR this...but I would also make the customer aware that it would not be perfect. Not arguing with anyone because I know some awesome PDR guys too...but this is just a big nasty mess that should be replaced for it to be back to original shape.
__________________
2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers |
12-05-2014, 06:11 PM | #22 | |
Go Vols!
Drives: 2011 Join Date: Feb 2012
Location: FL
Posts: 226
|
Quote:
In terms of pdr vs paint/bondo....I would go with pdr anyday of the week. |
|
12-05-2014, 06:25 PM | #23 |
Drives: 2013 Black 2 LT vert Join Date: Jul 2013
Location: kansas city
Posts: 1,765
|
OP ouch. good luck. its happend to all of us. go to painless dent to see if they can fix too. its repairable. you will be fine.
|
12-05-2014, 08:42 PM | #24 |
Drives: 4 wheels Join Date: Mar 2014
Location: anyplace, USA
Posts: 1,177
|
It does look a little creased. fwiw
I had a small but deep dent taken out a few months back. Those guys work magic. If you're in the upstate NY area I'd be happy to share the contact. |
12-05-2014, 09:12 PM | #25 | |
Drives: 2012 SS Victory Red Join Date: Nov 2014
Location: FL
Posts: 18
|
Quote:
__________________
2012 Camaro 2SS - Victory Red - Brought Home 10/15/14
2010 Tahoe - Blue Granite - Bought New 1/28/10 |
|
12-05-2014, 10:01 PM | #26 |
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
had three bb gun dents on the rear trunk lid, you can't tell they were ever there, no creases though. only a good pro can look at it and give you a definitive answer. worth a try IMO
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
12-05-2014, 11:38 PM | #27 |
Turbine Maker
Drives: 2012 Camaro 2LT-RS "LFX"V6 Join Date: May 2012
Location: Hampton,Virginia 23661-1824
Posts: 295
|
Body shop fix only...
|
|
|
|
|