Help Locating Replacement Part - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DavoinShowerHandel · 12-13-2023, 10:43 PM

If this is the wrong place to post this I apologize, and maybe someone can point me in the right direction. I'm looking for a dust cover that fits the rear shocks. The original part # is 92195499, and it's been discontinued. I'm just looking for a similar replacement. OEM would be great but I can work with aftermarket easy enough, I'd just prefer one that's the same harder plastic style as opposed to one similar to the front strut bellows. I've just searched high and low and I'm at my wits end trying to find one that will fit. Any help for a replacement part number or link would be very greatly appreciated.

CamaroCracka · 12-14-2023, 07:07 AM

I was on a couple shock manufacturer sites last week and they sold replacement bellows. Other than that, you are looking at getting one from someone parting a car out.

DavoinShowerHandel · 12-14-2023, 09:19 AM

Do you recall which ones? I've looked at several and not seen any that sell just the bellows themselves for the rear.

CamaroCracka · 12-14-2023, 12:55 PM

Oh hell, I don't remember. I have slept since then. I would rather just ship you one of mine for the shipping cost.

Edit, I believe it was the Moog site. I was looking for suspension bits.

https://www.moog-suspension-parts.com/monroe-63621

DavoinShowerHandel · 12-14-2023, 02:33 PM

Gotcha. Did you mean you have a set of the OEM-style ones that are the harder plastic type? If you did I'd gladly buy one off you in a heartbeat.

CamaroCracka · 12-14-2023, 02:39 PM

I have two or three from when I got rid of the factory shocks. I'll take a look this weekend.

DavoinShowerHandel · 12-14-2023, 04:36 PM

That would be awesome, I really appreciate you checking!

CamaroCracka · 12-15-2023, 02:43 PM

Here is what I have.

DavoinShowerHandel · 12-15-2023, 03:03 PM

The one on the right is what I was looking for, how much would you want for it? And I could message you to work out what the shipping would be.

12-13-2023, 10:43 PM	#1
DavoinShowerHandel Drives: 2011 Chevy Camaro 2SS/RS LS3 M6 Join Date: Mar 2019 Location: Ohio Posts: 55	Help Locating Replacement Part If this is the wrong place to post this I apologize, and maybe someone can point me in the right direction. I'm looking for a dust cover that fits the rear shocks. The original part # is 92195499, and it's been discontinued. I'm just looking for a similar replacement. OEM would be great but I can work with aftermarket easy enough, I'd just prefer one that's the same harder plastic style as opposed to one similar to the front strut bellows. I've just searched high and low and I'm at my wits end trying to find one that will fit. Any help for a replacement part number or link would be very greatly appreciated. __________________ 2011 Camaro 2SS/RS LS3 Mods: Kooks 1 7/8" LT Headers, CAI Intake w/ APEX Race Scoop, Bo White Ported Throttle Body, MGW Short Throw Shifter, Powerbond 25% Underdrive Pulley, Borla ATAK Catback, Full DSE suspension, Bilstein B6 shocks/struts, Yukon 4.11 gears/TrueTrac, 1.25" drop Dyno Tuned by Brian Turner of Dyno Tune Motorsports

12-14-2023, 07:07 AM	#2
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,768	I was on a couple shock manufacturer sites last week and they sold replacement bellows. Other than that, you are looking at getting one from someone parting a car out. __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.

12-14-2023, 09:19 AM	#3
DavoinShowerHandel Drives: 2011 Chevy Camaro 2SS/RS LS3 M6 Join Date: Mar 2019 Location: Ohio Posts: 55	Do you recall which ones? I've looked at several and not seen any that sell just the bellows themselves for the rear. __________________ 2011 Camaro 2SS/RS LS3 Mods: Kooks 1 7/8" LT Headers, CAI Intake w/ APEX Race Scoop, Bo White Ported Throttle Body, MGW Short Throw Shifter, Powerbond 25% Underdrive Pulley, Borla ATAK Catback, Full DSE suspension, Bilstein B6 shocks/struts, Yukon 4.11 gears/TrueTrac, 1.25" drop Dyno Tuned by Brian Turner of Dyno Tune Motorsports

12-14-2023, 12:55 PM	#4
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,768	Oh hell, I don't remember. I have slept since then. I would rather just ship you one of mine for the shipping cost. Edit, I believe it was the Moog site. I was looking for suspension bits. https://www.moog-suspension-parts.com/monroe-63621 __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.

12-14-2023, 02:33 PM	#5
DavoinShowerHandel Drives: 2011 Chevy Camaro 2SS/RS LS3 M6 Join Date: Mar 2019 Location: Ohio Posts: 55	Gotcha. Did you mean you have a set of the OEM-style ones that are the harder plastic type? If you did I'd gladly buy one off you in a heartbeat. __________________ 2011 Camaro 2SS/RS LS3 Mods: Kooks 1 7/8" LT Headers, CAI Intake w/ APEX Race Scoop, Bo White Ported Throttle Body, MGW Short Throw Shifter, Powerbond 25% Underdrive Pulley, Borla ATAK Catback, Full DSE suspension, Bilstein B6 shocks/struts, Yukon 4.11 gears/TrueTrac, 1.25" drop Dyno Tuned by Brian Turner of Dyno Tune Motorsports

12-14-2023, 02:39 PM	#6
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,768	I have two or three from when I got rid of the factory shocks. I'll take a look this weekend. __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.

12-14-2023, 04:36 PM	#7
DavoinShowerHandel Drives: 2011 Chevy Camaro 2SS/RS LS3 M6 Join Date: Mar 2019 Location: Ohio Posts: 55	That would be awesome, I really appreciate you checking! __________________ 2011 Camaro 2SS/RS LS3 Mods: Kooks 1 7/8" LT Headers, CAI Intake w/ APEX Race Scoop, Bo White Ported Throttle Body, MGW Short Throw Shifter, Powerbond 25% Underdrive Pulley, Borla ATAK Catback, Full DSE suspension, Bilstein B6 shocks/struts, Yukon 4.11 gears/TrueTrac, 1.25" drop Dyno Tuned by Brian Turner of Dyno Tune Motorsports

12-15-2023, 02:43 PM	#8
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,768	Here is what I have. Attached Images __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.

12-15-2023, 03:03 PM	#9
DavoinShowerHandel Drives: 2011 Chevy Camaro 2SS/RS LS3 M6 Join Date: Mar 2019 Location: Ohio Posts: 55	The one on the right is what I was looking for, how much would you want for it? And I could message you to work out what the shipping would be. __________________ 2011 Camaro 2SS/RS LS3 Mods: Kooks 1 7/8" LT Headers, CAI Intake w/ APEX Race Scoop, Bo White Ported Throttle Body, MGW Short Throw Shifter, Powerbond 25% Underdrive Pulley, Borla ATAK Catback, Full DSE suspension, Bilstein B6 shocks/struts, Yukon 4.11 gears/TrueTrac, 1.25" drop Dyno Tuned by Brian Turner of Dyno Tune Motorsports Last edited by DavoinShowerHandel; 12-15-2023 at 03:22 PM.