12-31-2019, 11:19 AM | #15 | |
Drives: 2015 2SS A6 Commemorative Edition Join Date: Nov 2019
Location: Utah
Posts: 433
|
Quote:
|
|
12-31-2019, 12:02 PM | #16 |
Drives: 2010 2ss/rs m6 Join Date: Mar 2012
Location: YQR
Posts: 59
|
thank you, SSammy. decision made up front...................
|
12-31-2019, 01:22 PM | #17 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,042
|
285/35/20 Firestone Indy 500's....
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
12-31-2019, 02:01 PM | #18 |
Drives: T Join Date: Mar 2015
Location: CA
Posts: 803
|
|
12-31-2019, 02:10 PM | #19 |
Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010
Location: Albany, Ga.
Posts: 3,400
|
275 40 20 up front and 315 35 40's on rear, now with that said, everyone will tell you not to do this.
First reason i did this is i was tired of scraping the rims on the curb, the tires balloon a little, so no curb rash since, i also have the Rs V6. Second and most important I got the (i did have some goodyears) BMW Bridgestone run Flats and they have a better road life, I've had these tires on my car for at least 2 years and still have life left in them.
__________________
PCP Hideaway Headlight Covers, BBK Headers & High Flow Cats, ZL1 Add-ons Wicker Bill, TL1/ZL1 Hood Insert, Gen5 DIY Frameless Mirror, ABL Dash Lighting an My link Navigation, Blacked out Rear Bowtie, all Sylvania led Turn Signals, Ceramic Window Tint By Nicks, MBRP Exhaust tips, GEN5 DIY Virginia Legal DRL Harness, Painted Brake Calipers, Vittesse Throttle Controller, Heritage Grill, Diode Dynamics Led Lighting, Manual Shifter Boot, Paddle Shifters, CNC Throttle Body, Trifecta Tune, RX Catch Can & Breather, Trunk Black out and Side Grills, Chevorlet door Sills.
|
12-31-2019, 02:21 PM | #20 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,042
|
275 on front 315's on rear - fits just fine. Rims are 9.5 front and 10.5 rear.
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
12-31-2019, 02:23 PM | #21 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,042
|
Here is how the fit...
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
01-01-2020, 10:15 AM | #22 |
Drives: 2016 SS Convertible Join Date: Sep 2016
Location: California
Posts: 1,108
|
what is the front offset?
I just picked up a set of the 19x10.5 Apex wheels on the winter sale. 35ET and plan to run 285-35 square on them with a 15mm front spacer, so effectively 20ET front on a 10.5" wheel. I ordered the Eibach pro-spacers which seem to be very well made specifically for these cars. My set-up will be rotatable - although with the miles I drive this car that won't matter too much. I've only used up 50% of the original tires in 3.5 years of driving. TireRack has a heck of a deal on the Cooper RS3 tires which I plan to order this week - $132 a tire in the 285 size. Hard to beat that. My next pick would have been either S007A for $250 or Pilot SS for ~$300. so 1/2 to 1/3 the cost on those coopers, figure it's worth running them for a few years anyway. I have a neighbor running those on his E39 M5. |
01-02-2020, 08:27 AM | #23 |
Drives: 2011 RS/SS Join Date: Feb 2017
Location: Alabama
Posts: 35
|
I have 20x10/20x11 replicas and ran 315/35/20 in the rear and there was annoying rub occasionally on the passenger side. I just switched to 335/30/20 on the same wheels and it almost never rubs now.
__________________
2011 Silver 2SS/RS LS3
|
01-02-2020, 05:58 PM | #24 |
Drives: 2010 2ss/rs m6 Join Date: Mar 2012
Location: YQR
Posts: 59
|
update..………..moving the 20x10 to the FRT,
I have 20x11 +43 enroute……… 275/40R20 FRT. 315/35R20 REAR using...……. continental extreme DWS06, looking forward to spring. |
01-03-2020, 02:12 PM | #25 |
Drives: 2013 Camaro RS Join Date: Jan 2019
Location: St. Charles, Il
Posts: 9
|
Unfortunately, Firestone does not offer a 315/35/20, so I opted for the 305/35/20 in the rear. 275/40/20 in the front. MRR755 gloss black, 20x10 and 20x11. Getting mounted next Tuesday. Can't wait!!!!
|
01-03-2020, 02:12 PM | #26 |
Drives: 2013 Camaro RS Join Date: Jan 2019
Location: St. Charles, Il
Posts: 9
|
Indy 500 tire.
|
01-03-2020, 03:47 PM | #27 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,042
|
Good choice you will be happy....
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
01-03-2020, 07:19 PM | #28 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
Here is a pic of my M228's on the rear, 20x11 +43 offset with MPSS 335/30/20'S.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|