09-24-2018, 06:05 AM | #1 |
Join Date: Sep 2018
Posts: 4
|
Question after installing lowering springs
Hi I've installed lowering springs on my 14 SS V8.
Not sure if the GAP shown in the pictures was there before installing.... Is that normal?? Or there is a problem? Thanks Sent from my ONEPLUS A5010 using Tapatalk |
09-24-2018, 06:12 AM | #2 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,250
|
Yes, it was there with the OE springs. It is normal. No worries.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
09-24-2018, 07:05 AM | #3 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,533
|
Yes, as stated, gap was always there. You're good
|
09-24-2018, 10:01 AM | #4 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
It's Normal
|
09-24-2018, 01:43 PM | #5 |
Drives: 2015 SS/RS 1LE Join Date: Dec 2014
Location: Milwaukee, WI
Posts: 537
|
Now turn your steering wheel and watch them move....
|
09-24-2018, 04:01 PM | #6 |
Moderator
|
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
09-24-2018, 05:50 PM | #7 |
Join Date: Sep 2018
Posts: 4
|
|
09-24-2018, 05:51 PM | #8 |
Join Date: Sep 2018
Posts: 4
|
Thanks guys
Here's a picture of it anyway Sent from my ONEPLUS A5010 using Tapatalk |
09-24-2018, 10:46 PM | #9 |
Drives: 2015 SS/RS 1LE Join Date: Dec 2014
Location: Milwaukee, WI
Posts: 537
|
What springs did you go with?
|
09-25-2018, 08:09 PM | #10 |
Join Date: Sep 2018
Posts: 4
|
|
|
|
|
|