You are browsing camaro6 
12-12-2017, 06:17 PM
|
#1 |
 Drives: 2017 SS 1LE SIM Join Date: May 2017
Location: AZ
Posts: 59
|
Are these track alignment specs any good?
see attached
if im not mistaken my factory alignment was trash? |
|
|
|
12-12-2017, 10:23 PM
|
#2 |
  
Drives: E46 S54 race car, 964C2 Join Date: Feb 2017
Location: Southern Indiana
Posts: 912
|
Yeah, factory rear toe was jacked... not uncommon. Fresh alignment looks good. If you see much track you’ll want to max front negative camber, but this is a good starting point if you see mostly street.
|
|
|
|
|
12-13-2017, 06:18 AM
|
#3 |
      
Drives: '18 1SS 1LE Join Date: Sep 2017
Location: Pennsyltucky
Posts: 2,573
|
How many miles?
|
|
|
|
|
12-13-2017, 07:46 AM
|
#4 |
|
"M1SS1LE"
Drives: 2017 SS 1LE Join Date: Dec 2015
Location: Upstate SC
Posts: 2,906
|
Looks good! My rear toe was out of whack from the factory too. Drove it 5k before I got the alignment felt like a new car after!
__________________
|
|
|
|
|
12-13-2017, 08:21 AM
|
#5 |
 Drives: 2017 Camaro 1LE SS Join Date: Oct 2016
Location: In my driveway or on the track. Lol
Posts: 257
|
That's probably about as max camber as you can get. It's right where mine was for track alignment. Do not drive a lot of miles on the street with it though. It will chord the inside within 5000-7000 miles. But it's great on track.
|
|
|
|
|
12-13-2017, 08:22 AM
|
#6 |
|
Drives: 2017 Camaro 1LE SS Join Date: Oct 2016
Location: In my driveway or on the track. Lol
Posts: 257
|
And make sure they tighten everything up because my left front went back to almost zero after a USCA event.
|
|
|
|
|
12-13-2017, 11:38 AM
|
#7 |
|
Drives: 2017 SS 1LE SIM Join Date: May 2017
Location: AZ
Posts: 59
|
thanks guys, and for who asked about miles, 3400.
|
|
|
|
|
12-13-2017, 11:46 AM
|
#8 | |
|
Drives: '18 1SS 1LE Join Date: Sep 2017
Location: Pennsyltucky
Posts: 2,573
|
Quote:
Just wondering how long you drove it and let the suspension settle. |
|
|
|
|
|
12-13-2017, 11:58 AM
|
#9 |
Drives: 2017 1le current /2015 2ss 1le sold Join Date: Jan 2016
Location: Whitesburg Ga 30185
Posts: 759
|
I got -2.4 front..maxed out..
__________________
2017 1LE Hyper Blue
|
|
|
|
|
12-13-2017, 02:01 PM
|
#10 |
|
Drives: 2017 SS 1LE SIM Join Date: May 2017
Location: AZ
Posts: 59
|
i did a track day on the stock setup and it was ok, figured this would help, it only cost me 80$ to boot
|
|
|
|
|
12-13-2017, 10:54 PM
|
#11 |
|
Drives: Garnet Red - 20 ZLE Join Date: Jun 2016
Location: Southern California
Posts: 1,010
|
-2.3 camber in the front, it wont go any further.
0.00 Toe in the front -1.7 camber in the rear 0.05 toe in the rear. I might try and zero the toe out next time. Ass end didnt want to rotate with the 325s compared to with the 305s. |
|
|
|
|
12-16-2017, 11:40 AM
|
#12 |
|
Drives: 2017 SS 1LE SIM Join Date: May 2017
Location: AZ
Posts: 59
|
im getting a little veer to the right now, do you think its because the rear end camber is .1 off?
|
|
|
|
|
12-16-2017, 01:12 PM
|
#13 | |
|
Drives: E46 S54 race car, 964C2 Join Date: Feb 2017
Location: Southern Indiana
Posts: 912
|
Quote:
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
