![]() |
#1 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
Using Hydro2 on the wheels
So it was time after my recent 3100 mile trip to get back to my 19/20 crays and I thought I would try a new product that's running around the detail sites getting rave reviews. Think of it as a "Mini Cquartz" coating product with a unique application procedure. It lasts 3 months and is a silca product. It is made by the makers of Cquartz and it's called "Carpro Hydro2" so go to Autogeek.net and read about it. $30 lasts a year or two....
it works like this: 1. wash wheel with dawn or any good soap that strips wax...leave the wheel wet - if you are OCD, dry and wipe down with alcohol/water and re-wet.... 2. spray 2-3 sprays of the hydro2 on the wheel - try and stay out of the sun 3. Immediately hit it with the hardest setting that your hose will allow, some even use a pressure washer - instantly it foams a mini amount and spreads on the wheel 4. Dry normally with a waffle weave, MF or blow dryer so what so great about this? Because it gets in all the little places you can't apply; like the corners, creases, badges etc...complete coverage...would be great for a complex web wheel like the TSW Nurburgring/HRE design... done wait a hour and put some water on it - it flies off! Used for wheels here, but made for the whole car... Link: http://www.autogeek.net/carpro-hydro...a-sealant.html |
![]() |
![]() |
![]() |
#2 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
update: I'm finding I hydro2 about every 5-6 weeks, but it's a base car that does not dust, and I'm in Florida good weather...z51's may need it more. I really notice that the nooks and crannies of the caliper don't hold dirt like they used to, that's worth it right there...also, I'm doing 4-5 spritzes per wheel with a special one shot spritz on the caliper...
![]() after you dilute it (mandatory) , the bottle will last about 6-8 months at this pace..... |
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2015 Torch Red Z51 2LT Join Date: Sep 2014
Location: Indiana
Posts: 87
|
wheels
so will this work on Black/Alum Z51 wheels? if someone already applied a coating like ceramic pro but it looks like crap how do i remove that? do you remove the wheels to coat them? thanks
__________________
Torch Red Z51 Coupe 2lt, Blk Interior, 8spd Auto, MagRide, Alum Blk Wheels, Red Calipers, Carbon badges, Transparent roof
(1100) Ordered 09/25/2014 (3000) Accepted by Production 09/30/2014 (3300) Scheduled 10/10/2014 (3400) Broadcast 10/17/2014 (3800) Produced BORN 10/28/2014 (4B00) Bayed 10/29/2014 (4000) Available to ship 10/29/2014 (4200) SHIPPED 11/03/2014 (5000) Delivered 11/04/2014 |
![]() |
![]() |
![]() |
#4 | |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
Quote:
2. to get all previous stuff off the wheel - wash with dawn dishwashing detergent and then spray and wipe on 25% rubbing alcohol/75% water - alcohol from CVS 3. then do the procedure outlined here... 4. I don't remove mine, but it would be a more complete job... |
|
![]() |
![]() |
![]() |
#5 | |
![]() Drives: 2015 Torch Red Z51 2LT Join Date: Sep 2014
Location: Indiana
Posts: 87
|
Quote:
__________________
Torch Red Z51 Coupe 2lt, Blk Interior, 8spd Auto, MagRide, Alum Blk Wheels, Red Calipers, Carbon badges, Transparent roof
(1100) Ordered 09/25/2014 (3000) Accepted by Production 09/30/2014 (3300) Scheduled 10/10/2014 (3400) Broadcast 10/17/2014 (3800) Produced BORN 10/28/2014 (4B00) Bayed 10/29/2014 (4000) Available to ship 10/29/2014 (4200) SHIPPED 11/03/2014 (5000) Delivered 11/04/2014 |
|
![]() |
![]() |
![]() |
#6 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
yes...
|
![]() |
![]() |
![]() |
#7 |
asptroopa1
Drives: 2014 Corvette Join Date: May 2013
Location: Little Rock Arkansas
Posts: 373
|
Autogeek no longer carries this product and said they will not be re-stocking it......
|
![]() |
![]() |
![]() |
#8 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
avail at also detailers image and the carpro website....
in fact, they almost have a sample size: http://www.carpro-us.com/exterior-su...centrate-50ml/ autogeek told me just the size I mentioned is being slimmed down in inventory, not the product. |
![]() |
![]() |
![]() |
#9 |
asptroopa1
Drives: 2014 Corvette Join Date: May 2013
Location: Little Rock Arkansas
Posts: 373
|
Dear
Keith, We are writing in reference to the order you placed with us. The 50 mL. CarPro Hydro2 Touchless Silica Sealant has been discontinued and will not be returning to stock. Would you like to cancel that item and have the towels ship out? Please let us know and we would be happy to help you with this. I got that and so I called and they told me they were not carrying the product- so I don't know. I ordered it from Amazon , cause I trust your reviews |
![]() |
![]() |
|
|
![]() |
|
|