11-10-2023, 07:01 AM | #673 |
Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021
Location: WALLER , TEXAS
Posts: 253
|
Mine is at 82 k . Not driving so much since retired .
__________________
2014 2SS/RS AGM L99
CAI Intake ELITE Catch Can POWERSTOP Brakes (5/31/21) |
11-10-2023, 09:04 PM | #674 |
"Cam Only"
|
Had to tighten up some of the bolts on my DSS axles. After replacing the boots I guess the bolts didn't get tightened down enough. A few started backing out which allowed a lot of grease to escape and get flung around.
So I had to clean up all that grease and torque all the bolts back down.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
11-11-2023, 10:50 AM | #675 |
Drives: 2014 Camaro SS 1Le Join Date: Feb 2016
Location: IL
Posts: 1,603
|
Replaced the supercharger belt.
__________________
2014 SS 1LE Money Pit/ Forged 402
CAM 22X/24X, .619/.617, 113 LSA/ LS9 Heads FIC 1200cc/DSX Aux Pump//McLeod RXT Clutch 730whp: 630Trq |
11-11-2023, 11:12 AM | #676 |
Give speed a chance
Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019
Location: Mesa, Az
Posts: 2,233
|
Before the Z06 takes over the QJ I figured I'd continue the maintenance on the 2LS. Changed the Diff fluid using AC Delco 75-90. It's nice that the Z/28 and 2LS take the same juice, I had a quart on the shelf.
__________________
2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.
|
11-11-2023, 01:04 PM | #677 |
Drives: 2010 Camaro SS , 2011 Colorado LS1 Join Date: Jan 2022
Location: Greenville, SC
Posts: 827
|
QuickJacks FTW
__________________
|
11-11-2023, 03:11 PM | #678 |
Drives: 2011 RS 2LT Join Date: Dec 2020
Location: So. Cal
Posts: 145
|
Quickjack NICE. Maybe for Xmas.
5000TL or 7000TL ? Are you on Frame Extensions / Pinch-Weld Blocks?? |
11-11-2023, 04:55 PM | #679 | |
Drives: 2010 Camaro SS , 2011 Colorado LS1 Join Date: Jan 2022
Location: Greenville, SC
Posts: 827
|
Quote:
__________________
|
|
11-12-2023, 09:05 AM | #680 |
Drives: Aqua Blue '10 1LT/RS Join Date: Jun 2023
Location: Delaware
Posts: 7
|
Finally got around to installing my SJM Autoprod Halo Always On harness today. Only issue I ran into was that the wire heading to the fuse box was an inch too short - an easy fix with some wire I have in the toolbox & the old trusty soldering iron. Love the DRL/halo look & being able to keep the DRLs on when the headlights come on - just a shame that you lose the halos-only parking light function (but realistically I never used that anyway). All in all pretty pleased!
__________________
-------------------
'10 Aqua Blue Metallic 1LT/RS |
11-12-2023, 03:22 PM | #681 |
Drives: 2011 RS 2LT Join Date: Dec 2020
Location: So. Cal
Posts: 145
|
|
11-13-2023, 02:56 AM | #682 | |
Give speed a chance
Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019
Location: Mesa, Az
Posts: 2,233
|
Quote:
__________________
2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.
|
|
11-13-2023, 03:33 AM | #683 |
Give speed a chance
Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019
Location: Mesa, Az
Posts: 2,233
|
Since I janked up the rear toe setting on my C5 Z06 I used the 2LS to perfect the toe plate procedure. My big problem was repeatability. No need to make adjustments to the Camaro, rear is toed in 1/16" and even tire wear. Now I need to correct the Z06. Glad I've got the QJ.
__________________
2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.
|
11-13-2023, 09:41 AM | #684 | |
"Cam Only"
|
Quote:
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
11-13-2023, 09:57 AM | #685 |
Life's just a Ride
Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013
Location: Columbia SC
Posts: 854
|
Got my SS front Emblem Painted looks like crap I think but eh
|
11-13-2023, 10:30 AM | #686 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,128
|
Damn, that's a great looking garage.
__________________
"Never cough into a full ashtray."
|
|
|
|
|