08-16-2016, 08:12 PM | #1 |
Cold Air Intake
What's the best cold air intake out here for these cars? I know JLT had one for the 5th gen with 25rwhp/rwtq peak power and 36 throughout the full pull(with a tune). Last I heard from them, they have no interest in making one for the 6th gen. So far the best I've seen is 14rwhp(without a tune).
__________________
Last edited by SSNYSTR; 08-17-2016 at 10:31 AM. |
|
08-17-2016, 07:41 PM | #2 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
The Roto-fab system is honestly built like no other CAI in the world. Our preliminary dyno tests were great (12+ peak HP gain). And we are looking forward to seeing more independent tests come out!
You can find more information on this system's development and release here: http://www.camaro6.com/forums/showthread.php?t=443153 http://www.camaro6.com/forums/showthread.php?t=463253 Thank you for your time, and feel free to PM me if you have any questions specific to our system. Michael |
08-18-2016, 03:45 PM | #3 |
Drives: 2016 Chevrolet Camaro 2SS Join Date: Jul 2016
Location: ARLINGTON, TX
Posts: 157
|
Was wondering the same. Many out now and many claim certain numbers but how do we know what they are saying is correct?
Roto-Fab - 12+ HP aFe Momentum GT Pro Stage-2 - no numbers yet CAI - 11+ HP Mishimoto - 14+ HP |
08-18-2016, 03:56 PM | #4 |
Drives: 2017 SS Join Date: Jul 2016
Location: Florida
Posts: 97
|
Mods should make a sticky with a running list of available intakes along with info for each. Another for headers and exhaust...
Like every other forum has to avoid 4, "whats the best cai" threads a day. |
08-18-2016, 09:36 PM | #5 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
Since testing last, we have increased our air box and air filter size, and we've also made a few key changes to the MAF housing. We fully expect to see gains in the 15-18 hp range with our production system.
As I'm sure many of you are, we're looking forward to seeing some dyno results come out for all of the available CAIs |
08-18-2016, 10:17 PM | #6 |
davet
Drives: 2016 2SS Mosaic Black Join Date: Apr 2010
Location: Arlington Texas
Posts: 854
|
Last I heard it still wasn't available. I went a different route so haven't been checking on it.
__________________
Replacement car ordered 2/02/2016
2/03/16 2500 2/04/16 3000 no TPW 2/8/16 3000 TPW 2/29 2/18/16 3400 3/3/16 3800 3/4/16 4B00 3/5/16 4300 3/7/16 4200!!! |
08-19-2016, 08:53 AM | #7 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
Most people considering a cold air intake are looking for more power. Cold Air Inductions delivers that and then some! We get the basics right with systems that provide more airflow without needing an ECM tune. Our systems use thermal barriers and coatings to keep the air inlet temp as cool as it can be: Cooler air means denser air which means more power. Our made in the USA systems feature aluminum construction with all TIG welding, air-filter view window, ¼-turn fasteners to make servicing the lifetime filter easy and a lifetime warranty. And they provide a deep, performance air-intake sound when you accelerate hard. You can learn more about what sets Cold Air Inductions apart from the rest here: https://www.coldairinductions.com/cold-air-intakes/about/
Kyle J. Lesch Director of Sales & Marketing Cold Air Inductions, Inc. 810-392-9999 Ext. 903 klesch@coldairinductions.com |
08-19-2016, 09:28 AM | #8 | |
Quote:
__________________
|
||
08-19-2016, 09:30 AM | #9 | |
Drives: 2016 SS M6, NPP Join Date: Apr 2016
Location: Hawthorne, CA
Posts: 1,957
|
Watch this CAI test vid from Sledge. He tested the CAI and Mishimoto vs stock.
|
|
08-19-2016, 09:37 AM | #10 | ||
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
Quote:
SEE OUR RESPONSE TO THIS VIDEO: Hello Sledgehammer, We know that many fellow Camaro enthusiasts appreciate the videos that you provide and we are aware that you add a great deal of value and input to the aftermarket world. We would like to share some of our experiences and knowledge pertaining to dyno pulls and the 2016 V8 Camaro in general, we have been working with this particular vehicle longer than any other aftermarket cold air intake manufacturer. 1) It takes a great deal of air in front of this vehicle when doing dyno pulls to simulate real life situations and see the results. 2) Also, we noticed that you did the dyno pulls with the hood open, this does not simulate real life driving conditions as you would not be driving down the road with the hood open. We ask that when you test our system vs. other systems (especially those systems without an air box lid) that you test them all with the hood closed. The systems without a lid will obviously show more airflow with the hood open but this is not real life driving conditions. This is the only way to compare apples to apples. 3) Obviously, as you stated in your video, it was an extremely hot and humid day. The only way to compare (apples to apples) is to run them on the same day and with the hood closed. Note: A cold air intake system with a sealed lid will not benefit from having the hood open while testing. However, a system with no lid will benefit (falsely) from testing with the hood open due to pumping losses. When the hood is closed (real life driving conditions) this will seal the box that has no lid. We look forward to seeing your future aftermarket cold air intake system comparisons! Please contact me if you have any questions or would like to discuss this further. PS: Keep those videos coming, we enjoy watching your views and insight on the Gen 6 Camaros. Kyle J. Lesch Director of Sales & Marketing Cold Air Inductions, Inc. 810-392-9999 Ext. 903 klesch@coldairinductions.com |
||
08-19-2016, 09:54 AM | #11 | |
Drives: 2016 Camaro 2SS, Nightfall Grey Join Date: Nov 2012
Location: Sulphur La.
Posts: 1,680
|
Quote:
__________________
2016 Camaro 2SS, Nightfall Grey,
MRC, NPP, S/R, Nav, A8, E-Force Supercharged. |
|
08-19-2016, 10:07 AM | #12 |
Drives: 2016 Hyper Blue Metallic 1SS M6 NPP Join Date: Jan 2016
Location: Indiana
Posts: 891
|
Last we heard still a couple months out. Around SEMA time.
__________________
2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates. Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges Order ID: TDHQMS 1100 on 01/07/2016 at Penske Chevrolet 6000 on 02/23/2016 Delivered to customer |
08-19-2016, 10:15 AM | #13 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
|
08-19-2016, 11:18 AM | #14 |
Drives: 2016 Hyper Blue Metallic 1SS M6 NPP Join Date: Jan 2016
Location: Indiana
Posts: 891
|
Here is my thing and just my opinion. I have ran both Roto-Fab and C.A.I intakes on my 5th Gens. I really like Roto-Fabs design this year for the SS going from a metal box to a plastic to keep the heat out. I think C.A.I should have stuck with the metal insulated intake tube versus whatever that is they have now. Does not look like that tube belongs on a high hp Camaro...maybe a drift car. Roto-Fab spent a lot of R&D time getting it right and ending up before release going with even a bigger box and filter. I also like that their box is fully closed except for the top that is closed once the hood is shut. I think that is a better overall design in my opinion. The C.A.I I had on my 2014 SS looked nice and had a top with insulation inside to help with heat but the bottom of the box did not fully enclose because of gaps between their box and the Camaro's engine bay. When I had both systems on my 2014 SS with factory NPP exhaust you could hear a big difference between the two from the exhaust note and I could feel it from the pedal as well. The Roto-Fab had more of a deep rumble and a better sound and feel wise when mashing down the pedal. The C.A.I kind of had a bogged down sound and I could feel that at the pedal as well. I am going with Roto-Fab for my Gen 6 SS and will do a unboxing and install video once I get my hands on it. Also will do a video for sound at the intake and inside the cabin because I went with the sound tube delete. Don't get me wrong both companies put out a great intake and a quality product so I am not here trying to knock either company. Just my opinion. Thanks
__________________
2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates. Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges Order ID: TDHQMS 1100 on 01/07/2016 at Penske Chevrolet 6000 on 02/23/2016 Delivered to customer Last edited by Hyper1SS; 08-19-2016 at 12:14 PM. |
|
|
Post Reply
|
|
|