Door panel swap

[Redgt03]

Good Morning,

I recently purchased 2015 door panels with the summit white panels for my 2011 summit white SS. The 2015 has the door lock/unlock on the door panel now, has anyone swapped from the 2010-13 door panel to a 2014-2015 panel. I was wondering if I need to swap the white panels over to my doors or can I just use the 2015 panel.

[Irace16]

I just did the insert swap a few weeks ago. Pretty easy, took less than an hour. Sharp razor blade to cut the plastic heads off the rivets, some short screws to reinstall. I would think you’d need a wire harness to add the door lock switch .if you want to just switched the entire door panel

[Redgt03]

Originally Posted by Irace16

I just did the insert swap a few weeks ago. Pretty easy, took less than an hour. Sharp razor blade to cut the plastic heads off the rivets, some short screws to reinstall. I would think you’d need a wire harness to add the door lock switch .if you want to just switched the entire door panel

That is what I was thinking! The swap is pretty easy. I will look at it once I take my door panel off next week.

Thank you for the reply.