[Mac7504]

The ****in search feature is not working for me at the moment and I spent 2 hours looking through threads in attempt to find it.

A while back someone made a comment on a for sale thread regarding someone trying to sell tires/rims that were a bit out of spec and even stated most people knock the setup.. I cant remember the size but I believe they were 325/30/19 (or 20). Someone replied and provided a website which compared the stock size of a tire vs what u would want to go to. The website even advised that the difference should be within a certain percentage .4% rings a bell but honestly I cannot remember. I would play with tire sizes for the rear and found a combination that would work but my luck I cannot find it.

I could've swore I took a screenshot of the website or saved it but no dice.

Long shot but I thought I'd ask here before spending more hours looking for the particular website.

Thanks

Johnny

[vampire]

check these two
https://tiresize.com/calculator/
https://www.1010tires.com/Tools/Tire-Size-Calculator

[Mac7504]

Looked at those and wasn't it. I'll have to look on my laptop tomorrow, I may have saved the website on that.

Thanks though.

[Firecaptain]

That's got % of difference on it.....

[arpad_m]

I also use tiresize.com/calculator and tiresize.com/comparison most of the time and posted several screenshots over the years.

The créme-de-la-créme of these tools, though, when more detailed data is required, is http://bndtechsource.ucoz.com/index/...alculator/0-20

[Mac7504]

Originally Posted by Firecaptain

That's got % of difference on it.....

Yeah but the one I was looking for, the comparison would turn red if it was out of a certain spec. This would work just fine.

[Mac7504]

Originally Posted by arpad_m

I also use tiresize.com/calculator and tiresize.com/comparison most of the time and posted several screenshots over the years.

The créme-de-la-créme of these tools, though, when more detailed data is required, is http://bndtechsource.ucoz.com/index/...alculator/0-20

Oooohhh fancy!!!! Thank you sir

[cdb95z28]

It may have been

rimsntires.com/specspro.jsp

Unfortunately, it is no longer available. It was pretty good.
Here's what it looked like:

[arpad_m]

Originally Posted by cdb95z28

It may have been

rimsntires.com/specspro.jsp

Unfortunately, it is no longer available. It was pretty good.
Here's what it looked like:

Attachment 1096102

Nice, very nice, too bad it's gone.

Fortunately, for wheel (not necessarily tire) research there is wheel-size.com, here is an example: https://www.wheel-size.com/calc/?whe...30-20X10.0ET20 (disregard the messed up unicode symbols, it's either Firefox or ad blockers/filters that wrecked them).

[cdb95z28]

Originally Posted by arpad_m

Nice, very nice, too bad it's gone.

Fortunately, for wheel (not necessarily tire) research there is wheel-size.com, here is an example: https://www.wheel-size.com/calc/?whe...30-20X10.0ET20 (disregard the messed up unicode symbols, it's either Firefox or ad blockers/filters that wrecked them).

I've seen that one, not bad at all.