PAC Dash Kit installed

[Fonse]

Originally Posted by chevy pilot

Ok.
Is your hazard button stiff motion ?

Just compared it with the original one and it doesn't has the same push button resistance. If you mean that with stiff then yes

[chevy pilot]

Here is mine.

IMG_5423 by Chevy, on Flickr
IMG_5428 by Chevy, on Flickr
IMG_5431 by Chevy, on Flickr

[tartagliazl1]

Originally Posted by 45thCamaro

I’m not sure if I saw this kit.

metro 99-3028s

[gm2376]

Originally Posted by tartagliazl1

I order that kit and I noticed how cheap those buttons felt and returned it. I ended up ordering the new metro kit. Hopefully it is built better.

what buttons felt cheap? it uses the factory hvac buttons.

[Fonse]

Originally Posted by gm2376

what buttons felt cheap? it uses the factory hvac buttons.

He probably meant the emergency flasher button, since it feels a bit different then stock button. But to me no deal breaker.

[tartagliazl1]

Originally Posted by gm2376

what buttons felt cheap? it uses the factory hvac buttons.

Yes. The flashers and door lock button

[gm2376]

Originally Posted by tartagliazl1

Yes. The flashers and door lock button

hmmm....i honestly can't tell a difference.....to me it would seem the rubbery buttons would seem a little cheaper.

[tartagliazl1]

Just installed the metro 90-3028s overall the kit looks great. The door lock and hazard buttons work and feel way better than the pac kit. The thing I don’t like is the door lock button doesn’t work on the kit because my lock switches are on the doors. 2013 zl1. But that’s ok. One other issue was the metro kit doesn’t come with steering wheel controls or the 2 usb and aux wires like the pac kit does. So those are 2 extra cost on top of the $330 for the kit.
My my passenger heated seat stopped working now so I’ll have to figure that out now. I get no lights when I press the button. Driver side works great. I looked for the fuse but cannot find the heated seat fuse. Anyone now where that is located? Here is a pic.

[45thCamaro]

Originally Posted by tartagliazl1

Just installed the metro 90-3028s overall the kit looks great. The door lock and hazard buttons work and feel way better than the pac kit. The thing I don’t like is the door lock button doesn’t work on the kit because my lock switches are on the doors. 2013 zl1. But that’s ok. One other issue was the metro kit doesn’t come with steering wheel controls or the 2 usb and aux wires like the pac kit does. So those are 2 extra cost on top of the $330 for the kit.

My my passenger heated seat stopped working now so I’ll have to figure that out now. I get no lights when I press the button. Driver side works great. I looked for the fuse but cannot find the heated seat fuse. Anyone now where that is located? Here is a pic.

I like the wAy it looks. The digital temp display is a nice touch

[tartagliazl1]

I found out why my passenger heated seat wasn’t working. The right side of the control knob wasn’t seated all the way in correctly. I reset it all works great now.

[45thCamaro]

Originally Posted by tartagliazl1

I found out why my passenger heated seat wasn’t working. The right side of the control knob wasn’t seated all the way in correctly. I reset it all works great now.

Great news.

I wish these kits wouldn’t push the radio back so far into the dash. If they would make brackets that could extend it out and make the kit flush I think it might look better.

[tartagliazl1]

That’s true. I was driving with the top down and the sun makes it hard to see the screen. I wish it was tipped down on a slight angle. Kinda like the mylink

[BAD DAB]

I have the PAC unit too. The new Metra unit is nice.

[45thCamaro]

Originally Posted by BAD DAB

I have the PAC unit too. The new Metra unit is nice.

You put on aftermarket AC control covers?