10-25-2018, 10:06 AM | #1 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Driver side taillight out
Last week we see one of the tail lights is out, don't know why it worked fine up to that point in time, we pull it out and there is no power, ground works fine, at that point we print out the wiring diagrams, they tell us to check fuss #21 and #28 there the fuss's under the hood, and are the power to the taillight's we check them and there good.
so at this point we are thinking we have a cut line some where, but before we chase this wire down, we print the fuss list for the front box, from there we check all the fuss's that are part of the BCM, why the BCM, it controls most of the car and if one thing is working it can be that more then any thing. So no where in the taillight wiring diagrams does it say look at fuss #18 but that's what it was, #18 is nothing more then a general power to the BCM, but it control's the drivers side power to the taillight and more did not have a long time to run down the rest of the circuits it controls. |
10-25-2018, 01:13 PM | #2 |
Drives: 2016 2SS Convertible Join Date: May 2012
Location: St. Louis, MO
Posts: 1,710
|
Thanks for sharing the information!
|
10-31-2018, 01:56 PM | #3 |
Drives: 2016 Chevy Camaro 2SS Join Date: Aug 2012
Location: Atlanta, GA
Posts: 289
|
Yea i found that out when I was messing with some fuses a few weeks ago in the dark. epic fail
|
10-31-2018, 03:44 PM | #4 |
Drives: Too many to list Join Date: Dec 2011
Location: East Coast Runner
Posts: 878
|
Stop messing around with those Chinese tails and you wouldn’t have this problem :-)
Sent from my iPhone using Tapatalk Pro |
|
|
Post Reply
|
|
|