![]() |
![]() |
#1 |
![]() Drives: 1971 Camaro Z-28 Join Date: Sep 2015
Location: Puerto Rico
Posts: 318
|
Wheels size vs tires size
Having the mrr 228, z28 replicas 10'' in front and 11'' in the rear, can i use 275 in front instead of 285's combined with 305's instead of 315 ones in the rear? I dont want that tires look out of the fender or rear panel.
|
![]() |
![]() |
![]() |
#2 |
![]() Drives: 2010 Camaro SS/RS 6M Join Date: Feb 2018
Location: Missouri
Posts: 107
|
275 in the front works perfect as far as overall tire height for the 305 compared to the 275 I could do a little google searching for a tire size calculator to compare.
__________________
"A free people ought not only to be armed, but disciplined…” – George Washington
|
![]() |
![]() |
![]() |
#3 |
![]() Drives: 1971 Camaro Z-28 Join Date: Sep 2015
Location: Puerto Rico
Posts: 318
|
I always find the 275 in front with 315 at rear. The 275/40/20 with 305/35/20 can be matched without probs? The zl1 uses 285/305 combo, but think that the 285 is lower than the 275 plus wider, may go out of the fender. Some opinions here?
Last edited by Mike Cordero; 03-07-2019 at 05:32 AM. |
![]() |
![]() |
![]() |
#4 |
![]() Drives: 1971 Camaro Z-28 Join Date: Sep 2015
Location: Puerto Rico
Posts: 318
|
BUMP, looking for opinions, thanks.
|
![]() |
![]() |
![]() |
#5 |
![]() Drives: 2014 yellow 2SS/RS Join Date: Apr 2015
Location: Stoney Creek, Ontario
Posts: 488
|
I believe as long as your less than an inch difference in overall diameter you should be good
__________________
K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter
|
![]() |
![]() |
|
|
![]() |
|
|