Am I able to get an AT 1LE rear end for my 2010 v6? - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MSgt O · 03-25-2023, 12:05 PM

Ive been looking for a 1LE diff as well, and yeah, good luck! I know for the dealer to swap in 3.91's into an SS rear end is about 1700 otd thats with the gears from GM. So base your pricing from there? Waiting to hear back from a local shop up here to see what they say....

SummitWhite11 · 03-25-2023, 02:45 PM

Quote:

Originally Posted by MSgt O

Ive been looking for a 1LE diff as well, and yeah, good luck! I know for the dealer to swap in 3.91's into an SS rear end is about 1700 otd thats with the gears from GM. So base your pricing from there? Waiting to hear back from a local shop up here to see what they say....

Good to know. I am now wondering if I do this swap on my V6… will my traction control button still work when needed/not needed?

Sent from my iPhone using Tapatalk

MSgt O · 03-25-2023, 05:05 PM

I would imagine so. The traction controls on these cars are I believe electric, and have zero to do with the differential. At least thats how it is on my Taco. Ive been reading alot about the 1LE swap and have seen nothing to the contrary.

Mr_Draco · 03-25-2023, 05:41 PM

Quote:

Originally Posted by SummitWhite11

Good to know. I am now wondering if I do this swap on my V6… will my traction control button still work when needed/not needed?

Sent from my iPhone using Tapatalk

I've not seen anyone else mention an issue with traction control.

SummitWhite11 · 03-25-2023, 05:59 PM

Ok good to know I would not lose out on the traction control feature.

Sent from my iPhone using Tapatalk

acutron42 · 03-25-2023, 06:44 PM

Here is a unit on ebay in Palm Bay. Maybe worth a drive to check it out.

https://www.ebay.com/usr/cjexportinc...75.m3561.l2559

Mr_Draco · 03-25-2023, 06:56 PM

Could check any junk yards around you for a cheap SS diff and have someone install new 3.91 gears. Don't know which way would be cheaper but it's option.

acutron42 · 03-25-2023, 07:10 PM

I also found this listing in Jupiter. It actually looks like a decent setup for the money.

https://www.ebay.com/itm/12537191500...QAAOSw1P9iqoie

SummitWhite11 · 03-25-2023, 07:38 PM

Quote:

Originally Posted by acutron42

Here is a unit on ebay in Palm Bay. Maybe worth a drive to check it out.

https://www.ebay.com/usr/cjexportinc...75.m3561.l2559

Thats the one I purchased not long ago today ha!

Sent from my iPhone using Tapatalk

SummitWhite11 · 03-25-2023, 07:40 PM

Quote:

Originally Posted by acutron42

I also found this listing in Jupiter. It actually looks like a decent setup for the money.

https://www.ebay.com/itm/12537191500...QAAOSw1P9iqoie

Dang good deal but not the gear set up I wanted plus I already have a new suspension setup that I am pleased with.

Sent from my iPhone using Tapatalk

acutron42 · 03-25-2023, 07:47 PM

I see that seller has pulled that off his site now.

SummitWhite11 · 03-25-2023, 08:02 PM

Quote:

Originally Posted by Mr_Draco

Could check any junk yards around you for a cheap SS diff and have someone install new 3.91 gears. Don't know which way would be cheaper but it's option.

Sadly most are too far from me. When I used to live in South Florida over 4 years ago… I would drive to a U Pull It junk yard from time to time. They have a good number of Camaros there of mostly 3rd Gen and up. I’m too far from any junkyards now. Also since I am a mail carrier working for USPS… it’s not often I get time off and when I do its with the family. Visiting Junk yards isn’t on their list ha!

Sent from my iPhone using Tapatalk

SummitWhite11 · 03-25-2023, 08:05 PM

Quote:

Originally Posted by acutron42

I see that seller has pulled that off his site now.

Good ha! I saw the new gaskets were added along with BMR bushings plus Free Shipping… I knew it was a good deal. Tried to negotiate for $1200 since the seller is only less than 2 hrs away from me. No go. Went ahead and purchased. Most others were selling for more on a higher mileage set up without the other items included or goodies.

Sent from my iPhone using Tapatalk

jeff657756 · 03-27-2023, 08:31 AM

Quote:

Originally Posted by SummitWhite11

Good ha! I saw the new gaskets were added along with BMR bushings plus Free Shipping… I knew it was a good deal. Tried to negotiate for $1200 since the seller is only less than 2 hrs away from me. No go. Went ahead and purchased. Most others were selling for more on a higher mileage set up without the other items included or goodies.

Sent from my iPhone using Tapatalk

FYI, you likely get a good amount of drivetrain noise with those bushings. Not sure how much you daily the car.

03-25-2023, 05:59 PM	#47
SummitWhite11 Drives: 2010 2LT/RS Join Date: Mar 2015 Location: Palm Coast, FL Posts: 1,165	Ok good to know I would not lose out on the traction control feature. Sent from my iPhone using Tapatalk __________________ 2010 2LT/RS ZL1 Appearance package, Flow Master American Thunder Cat Back Exhaust w/ QUAD TIPS, K&N Typhoon CAI, Ported VMAX TB, OEM GM Brembo Brakes Package w/ Hawks Carbon Ceramic Pads, Night Owl Halo Kit (WIFI), FRONT/REAR Carbon Fiber Wrapped Bowties, Rear Oracle Blue LED Bowtie, Oracle Ghosted Painted Side LED Markers, Silver Side Faded Gills, OEM Satin Camaro Fuel Door, OEM Strut Tower Brace, Detroit Speed Engineering 1.5" Lowering Springs, Koni Orange STR.T Struts, Z28 rear LCA's, Black Magic rear 32" sway bar, 1LE front sway bar w/ DSE end links. Evil Energy Catch Can.

03-25-2023, 06:44 PM	#48
acutron42 Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020 Location: WNY Posts: 732	Here is a unit on ebay in Palm Bay. Maybe worth a drive to check it out. https://www.ebay.com/usr/cjexportinc...75.m3561.l2559 __________________ 2013 2SS GPI built & tuned 415, spec'd by Andrew Cammer. GPI ported intake/tb/heads, Tooley springs, CHE trunnions, Callies rotating assembly, Diamond pistons, GPI SS3 VVT, ATI 10% ud damper, Circle D 3800, Kooks ceramic coated lt's with green cats, Mishimoto rad & oil cooler, Derale trans cooler, Holley efi rails.

03-25-2023, 07:10 PM	#50
acutron42 Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020 Location: WNY Posts: 732	I also found this listing in Jupiter. It actually looks like a decent setup for the money. https://www.ebay.com/itm/12537191500...QAAOSw1P9iqoie __________________ 2013 2SS GPI built & tuned 415, spec'd by Andrew Cammer. GPI ported intake/tb/heads, Tooley springs, CHE trunnions, Callies rotating assembly, Diamond pistons, GPI SS3 VVT, ATI 10% ud damper, Circle D 3800, Kooks ceramic coated lt's with green cats, Mishimoto rad & oil cooler, Derale trans cooler, Holley efi rails.

03-25-2023, 07:47 PM	#53
acutron42 Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020 Location: WNY Posts: 732	I see that seller has pulled that off his site now. __________________ 2013 2SS GPI built & tuned 415, spec'd by Andrew Cammer. GPI ported intake/tb/heads, Tooley springs, CHE trunnions, Callies rotating assembly, Diamond pistons, GPI SS3 VVT, ATI 10% ud damper, Circle D 3800, Kooks ceramic coated lt's with green cats, Mishimoto rad & oil cooler, Derale trans cooler, Holley efi rails.

03-25-2023, 12:05 PM	#43
MSgt O Drives: 2012 Camaro 2SS/RS Vert LS3/M6 Join Date: Aug 2021 Location: Cheboygan, Michigan Posts: 658	Ive been looking for a 1LE diff as well, and yeah, good luck! I know for the dealer to swap in 3.91's into an SS rear end is about 1700 otd thats with the gears from GM. So base your pricing from there? Waiting to hear back from a local shop up here to see what they say....

03-25-2023, 05:05 PM	#45
MSgt O Drives: 2012 Camaro 2SS/RS Vert LS3/M6 Join Date: Aug 2021 Location: Cheboygan, Michigan Posts: 658	I would imagine so. The traction controls on these cars are I believe electric, and have zero to do with the differential. At least thats how it is on my Taco. Ive been reading alot about the 1LE swap and have seen nothing to the contrary.

03-25-2023, 06:56 PM	#49
Mr_Draco Drives: 2SS/RS Join Date: Sep 2008 Location: Western North Carolina Posts: 7,181	Could check any junk yards around you for a cheap SS diff and have someone install new 3.91 gears. Don't know which way would be cheaper but it's option.