What Did You Do To Your Camaro Today? - Page 1581 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

davesnever · 04-16-2019, 04:45 AM

Quote:

Originally Posted by Cheap Guy

Dang. I just ordered a silver one from eBay. Hope it lasts but that’s not usually the case with off brand eBay stuff.

Are they 2 piece snap together? Look for ones that are TPU(Thermoplastic polyurethane). I bought a few from AliExpress for about $4.00 CAD so a bit cheaper for you guys. These are one piece and don't scratch as much as the hard plastic 2 piece ones. Those 2 piece ones always popped open on me too lol.I've even seen carbon fiber design ones. Alot more choices than Ebay, drawback is shipping can sometimes be long.

chasmanian · 04-16-2019, 11:45 AM

Thanks Dave. I'll look for then instead. Tpu is nicer anyway.

Welker2 · 04-17-2019, 10:01 AM

It's great living in a small town and getting to know the various shop/store owner's and managers. Picked up Mobile 1 at our local AutoZone, total cost for 8 qrts oil and filter after instore discount, military discount & online rebate = $45 & change. Took it across the street to our local Big- O that I've been doing business with for years to have them do the change; cost after 'discounts' = $10. Total cost = $55.

It also put a big smile on my face when several of the employees commented on how nice my car looked and sounded; quote from one, "That is one bada$$ looking and sounding Camaro."

davesnever · 04-17-2019, 10:35 AM

Quote:

Originally Posted by chasmanian

Thanks Dave. I'll look for then instead. Tpu is nicer anyway.

Just an idea of whats out there.

Tajefe Couple · 04-17-2019, 05:53 PM

Hey Davesnever, Looked all over inter-web for the luminous fob buttons and didn't come up with anything. Would you share the link or company those can be found. Appreciate it!

grandpamike · 04-17-2019, 09:24 PM

so there was a small mark on the front bumper. It was there when I bought the car but it drove me crazy. Also, it came with a license plate bracket. the bracket made marks in the stripes. Today I peeled off the stripes and fixed the small dent and made new stripes. came out pretty good, not perfect but better than it was.

davesnever · 04-18-2019, 04:59 AM

Quote:

Originally Posted by Tajefe Couple

Hey Davesnever, Looked all over inter-web for the luminous fob buttons and didn't come up with anything. Would you share the link or company those can be found. Appreciate it!

Searched for Luminous + Chevrolet at Aliexpress.com

https://www.aliexpress.com/af/lumino...wCP=y&jump=afs

Not saying this is your best choice but this gives you an idea of what's there, there may be cheaper sellers of the same product.

https://www.aliexpress.com/item/Plas...2-6def4ac04884

davesnever · 04-18-2019, 05:08 AM

Quote:

Originally Posted by grandpamike

so there was a small mark on the front bumper. It was there when I bought the car but it drove me crazy. Also, it came with a license plate bracket. the bracket made marks in the stripes. Today I peeled off the stripes and fixed the small dent and made new stripes. came out pretty good, not perfect but better than it was.

Hmmmm, I have a similar problem, could that be a bit of bondo hiding under that vinyl lol and if so did you run in to any issues?

Tajefe Couple · 04-18-2019, 01:44 PM

[QUOTE=davesnever;10493899]Searched for Luminous + Chevrolet at Aliexpress.com

Not saying this is your best choice but this gives you an idea of what's there, there may be cheaper sellers of the same product.

Thank you!

splashlog48 · 04-18-2019, 01:46 PM

I locked in on Hagerty insurance.

grandpamike · 04-18-2019, 05:20 PM

Quote:

Originally Posted by davesnever

Hmmmm, I have a similar problem, could that be a bit of bondo hiding under that vinyl lol and if so did you run in to any issues?

yeah is just some body filler/bondo. no problems, I just roughed it up a bit and put some bondo on it and let it dry then sanded it. I should have sanded it a bit better but it is hardly noticeable. I plan on getting the actual stripes. I made these myself.

15RS2NV · 04-18-2019, 10:46 PM

Christine got a bath today, ready for detailing tomorrow and car shows on Saturday.

15RS2NV · 04-18-2019, 10:47 PM

Quote:

Originally Posted by grandpamike

so there was a small mark on the front bumper. It was there when I bought the car but it drove me crazy. Also, it came with a license plate bracket. the bracket made marks in the stripes. Today I peeled off the stripes and fixed the small dent and made new stripes. came out pretty good, not perfect but better than it was.

Car looks damn good! Much better with that dent gone, and never been a fan of front tags.

Arogg · 04-19-2019, 09:15 AM

Ordered a heritage grille, 6th gen Redline Camaro Badges, new R1 Concepts Rotors/Pads, and BMR Lowering springs! Last week I finally refinished my calipers to Red with the G2 kit. Ill post some pics of those later. ITS MOD SEASON!!

04-17-2019, 10:01 AM	#22123
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Got the oil changed It's great living in a small town and getting to know the various shop/store owner's and managers. Picked up Mobile 1 at our local AutoZone, total cost for 8 qrts oil and filter after instore discount, military discount & online rebate = $45 & change. Took it across the street to our local Big- O that I've been doing business with for years to have them do the change; cost after 'discounts' = $10. Total cost = $55. It also put a big smile on my face when several of the employees commented on how nice my car looked and sounded; quote from one, "That is one bada$$ looking and sounding Camaro." Attached Images __________________

04-17-2019, 05:53 PM	#22125
Tajefe Couple Drives: Never just fly under the radar Join Date: Jul 2015 Location: Kansas Posts: 1,531 View My Garage	Hey Davesnever, Looked all over inter-web for the luminous fob buttons and didn't come up with anything. Would you share the link or company those can be found. Appreciate it! __________________ 1-8-4-3-6-5-7-2 Old Skool

04-17-2019, 09:24 PM	#22126
grandpamike Drives: 2014 2lt rs Join Date: Nov 2017 Location: georgia Posts: 90	so there was a small mark on the front bumper. It was there when I bought the car but it drove me crazy. Also, it came with a license plate bracket. the bracket made marks in the stripes. Today I peeled off the stripes and fixed the small dent and made new stripes. came out pretty good, not perfect but better than it was. Attached Images

04-18-2019, 01:44 PM	#22129
Tajefe Couple Drives: Never just fly under the radar Join Date: Jul 2015 Location: Kansas Posts: 1,531 View My Garage	[QUOTE=davesnever;10493899]Searched for Luminous + Chevrolet at Aliexpress.com Not saying this is your best choice but this gives you an idea of what's there, there may be cheaper sellers of the same product. Thank you! __________________ 1-8-4-3-6-5-7-2 Old Skool

04-18-2019, 01:46 PM	#22130
splashlog48 Drives: 2011 Green SS M6 Join Date: Jun 2015 Location: CleveBurbs Ohio Posts: 669	I locked in on Hagerty insurance. __________________ Edelbrock EForce Blower, RDP custom grind cam with upgrades,Stainless Power Headers with HighFlow Cats, Stainless Power Retro catback, DSS halfshafts, CAI brand CAI, Tuned ON the Dyno by Steve at RDP. SLP rims,All vinyl stripes removed and painted on, custom hand painted pinstriping, Custom leather seats, Lloyds mats,windows tinted, Sparks emblems, Hurst Billit shifter, and too many small items to list. VDI Scissors doors.

04-16-2019, 11:45 AM	#22122
chasmanian Drives: 2015 Camaro SS Join Date: Dec 2013 Location: Easton, PA Posts: 291 View My Garage	Thanks Dave. I'll look for then instead. Tpu is nicer anyway.

04-18-2019, 10:46 PM	#22132
15RS2NV Ponies are for girls Drives: 2015 RS LFX Red Hot A6 Join Date: Sep 2018 Location: Southern AZ Posts: 315 View My Garage	Christine got a bath today, ready for detailing tomorrow and car shows on Saturday. __________________ H&R 1.8/1.7” drop, Overkill 80mm + intake ported by AFS, 1" insulator MACE, Accel Super Coils, THR cai, JET MAF sensor, Hurst shifter handle, GPP strut tower brace, CI ice cube tray hood vents (functional) @SemperFiCamaro

04-19-2019, 09:15 AM	#22134
Arogg A legend in his own mind Drives: 2010 2SS/RS M6 Join Date: May 2013 Location: Long Island, New York Posts: 827	Ordered a heritage grille, 6th gen Redline Camaro Badges, new R1 Concepts Rotors/Pads, and BMR Lowering springs! Last week I finally refinished my calipers to Red with the G2 kit. Ill post some pics of those later. ITS MOD SEASON!! __________________ 2010 2SS/RS "The Mistress" Color matched OEM GFX / VIS Carbon Fiber Hood (absolute trash quality and customer service ) / Heritage Grille / 5% Windows / 30% Windshield tint with 5% visor strip / Tinted Exterior Lights / Streetfighter LA Spoiler / Morimoto XB LED fogs / LED sidemarkers / Airaid CAI / Hurst Short Throw / TSP LT's / No cats / No resonator / Corsa Xtreme Catback / Trifecta Tune / Factory amp replaced / 2 JL Audio 12's in the trunk / MRR 228 Wheels / BMR Springs / Moog Endlinks / R1 Concepts Rotors & Pads

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM