12-01-2016, 05:36 PM | #1 |
Account Suspended
Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013
Location: Spring Texas
Posts: 1,488
|
My Build is officially underway wooo-hooo!!!!
Scheduled my appointment to drop off my 17 ss to Chris at renegade motorsports in Houston for my mild build. Got the cam kit ordered along with arp head studs, head gaskets, trinuion upgrade, rockers, lifters, etc (the whole 9 yards). I went with the stage 3 cam kit from Vengence racing in Ga, Headers has been sitting in my garage for about a month now (long tube 2 inch catless), Mbrp xp race series catback exhaust with 4 inch tips (bye bye npp), hurst short throw shifter (this and the exhaust en route and should be at my house tomorrow). Finally the best for last stock non ported lt4 heads, along with stock lt4 blower (due tomorrow or Saturday delivery), metco upper 2.38 upper pulley, and fastproms 9.55 lower pulley (brand unknown). upgrading to an lt4 clutch kit as well (got it cheap af). I'm pretty much broke for now (go figure) lol but am stoked to say the very least.
I'm waiting on info on the heat exchanger and which cai to get (only two items I have not ordered yet). Car is getting dropped off Wednesday and is due to be ready (lord willing) following Monday or Tuesday. Matt at fsp will be tuning it. I'm shooting for 630-650 being conservative (to the wheels) but time will tell all. I will keep you guys/gals in the loop and will post pics starting next week. This is the part I hate the most (waiting) lol. |
12-01-2016, 05:46 PM | #2 |
Drives: Garnet Red - 20 ZLE Join Date: Jun 2016
Location: Southern California
Posts: 1,010
|
going to need meth to get that high without replacing some of the fuel system. Sounds like its going to be a killer build, excited to see how it turns out!
|
12-01-2016, 05:46 PM | #3 |
Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
|
Congrats. Can't wait to hear it,
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube" |
12-01-2016, 06:05 PM | #4 |
Account Suspended
Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013
Location: Spring Texas
Posts: 1,488
|
Ty guys, I talked to my builder and he thinks I'm ok fuel wise (I will be using the lt4 injectors and injector pump) I forgot to mention.
|
12-01-2016, 06:37 PM | #5 |
Drives: 2018 2SS Camaro Hot Wheels Edition Join Date: Sep 2015
Location: Cleveland, Ohio
Posts: 2,814
|
Congrats!
__________________
Zack46
2018 Camaro 2SS Orange Crush Hot Wheels Limited Edition Power Sunroof, 8 Speed Auto/Remote Start, NPP Exhaust Production Sequence Number 98 NEOCC Camaro Club Member Former Ride: 2016 Camaro 2LT RS V6 Hyper Blue Metallic |
12-01-2016, 06:40 PM | #6 |
Drives: 2016 SSupercharged, 2012 Camaro SS Join Date: Sep 2016
Location: Houston
Posts: 101
|
Congrats on the build, gonna be super snappy!!!
__________________
|
12-01-2016, 07:19 PM | #7 |
"Lohla"
|
Mild build!?!?
__________________
OG Trans and Diff but all else is upgraded. Twins bring wins ;-)
|
12-02-2016, 09:48 AM | #8 |
Drives: Me: '16 2SS yellow, Wife: '16 1SS Join Date: Feb 2016
Location: Fort Worth, TX
Posts: 447
|
awesome!!! Keep us updated!!
__________________
- Dennis Hixson
2016 Camaro 2SS ** EdelBrock E-Force Supercharger, 3" pulley, RotoFab air intake, Alky Methanol Injection System, Corsa Extreme Exhaust, Kooks longtube headers, TSP VV2 CAM, 1LE wheels @ 285/30/20 front & 305/30/20 rear... 707.41rwhp, 702.36 torque |
12-02-2016, 09:57 AM | #9 |
Drives: 2016 NFG SS A8 Join Date: Jul 2014
Location: Valdosta
Posts: 405
|
I thought Matt/FSP was out of business??
__________________
2016 NFG 1SS A8. Pray ported intake manifold, Rotofab dry cai, kooks 2" catted longtubes, E85,
|
12-02-2016, 10:07 AM | #10 |
Account Suspended
Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013
Location: Spring Texas
Posts: 1,488
|
|
12-06-2016, 06:43 PM | #11 |
Account Suspended
Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013
Location: Spring Texas
Posts: 1,488
|
Most of parts in. Waiting on a few misc items and we're about good to go.
|
12-06-2016, 06:49 PM | #12 |
Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
|
What else do you have to purchase to get that blower to work?
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube" |
12-06-2016, 06:53 PM | #13 |
Account Suspended
Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013
Location: Spring Texas
Posts: 1,488
|
Going to the shop tomorrow and gunna tease myself and see the cam etc. The anxiety level is beyond explainable right now.
|
12-06-2016, 07:01 PM | #14 |
Account Suspended
Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013
Location: Spring Texas
Posts: 1,488
|
Had to order Zl1 tensioner pulleys, Zl1 idler pulley, a V3 Cts v lower pulley (went with innovators west part number 8410 and 9.10 ring), an upper pulley for sc (waiting to order that) hoses (get at any parts store), and adaptor for heat exchanger motor. I'm using the Z06 hx motor. Aldo welds houston is making a reservoir for Hx. Bunch of options for the heat exchanger. So far not too much complications.
|
|
|
Post Reply
|
|
|