06-07-2021, 08:45 PM | #1 |
Drives: 2011 SS Join Date: Jun 2021
Location: Lee's Summit, MO
Posts: 2
|
Is this engine salvageable?
Hello, I'm not very familiar with Camaros, so I'm not sure how far back the engine sits. Is this engine salvageable, or is there just too much damage?
|
06-07-2021, 10:16 PM | #2 |
Drives: 2010SS Join Date: Mar 2021
Location: Motor City
Posts: 56
|
Whoa ! That hood's shaped just like a taco shell. I couldn't say for sure, but I wouldn't have high hopes.
__________________
2010SS 6 speed - Hennessey HPE650 Serial #14
|
06-07-2021, 10:34 PM | #3 |
Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020
Location: Austin, TX
Posts: 2,109
|
Idk. Cause it looks like the crank might have been hit pretty hard and being the engine is aluminum it could have cracks. Just know if isn't cracked or the crank isn't shoved back that you will more than likely have to replace the intake, timing cover, and oil pan among all of the other things like accessories etc. If it was me I would give it a shot just because I'm that kind of guy.
__________________
DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
06-08-2021, 01:10 AM | #4 |
Drives: ABM #93 Join Date: Oct 2018
Location: Lotaburger
Posts: 2,696
|
…oak tree, you're in my way…. You won’t know what you’ve got till you start tearing into it. Personally, it don’t look promising.
__________________
ABM #2399 2SS/RS:SOLD
ABM #93 2SS/RS Black Rally stripes, Titanium Interior 4,000 miles: GM GFX side skirts and diffuser waiting on paint, GM dovetail, GM heritage, RPI ZL1 style splitter. ‘87 IROC-Z Iroc blue. all original unmolested with 50K miles. |
06-08-2021, 07:28 AM | #5 |
Drives: 15 Camaro SS Join Date: Oct 2018
Location: Mountains of central PA
Posts: 1,442
|
Guessing its no good. It for sure made contact with the crank. Depending on what you are trying to do here, I would walk away
__________________
15 Camaro SS- GPI max top end, ESS Vortech V3 9psi, ID 1050s, ZL1 pump, JMS bap, Long tubes, Corsa extreme, Circle D pro 5C, 391 rear, DSS carbon drive shaft, poly cradle bushings, tuned by Ted Jannetty and much much more
|
06-08-2021, 07:37 AM | #6 |
Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,112
|
Can you say: Toast
__________________
|
06-08-2021, 07:52 AM | #7 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,449
|
Stay clear from this one!!! I'm sure as mentioned the crank has taken a hit and wouldn't trust it for anything. There are more engines out there to be had..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
06-08-2021, 09:00 AM | #8 |
A legend in his own mind
Drives: 2010 2SS/RS M6 Join Date: May 2013
Location: Long Island, New York
Posts: 827
|
pass on this one bud. Just like all the others have said... doubtful that motor survived without ANY damage
__________________
2010 2SS/RS "The Mistress"
Color matched OEM GFX / VIS Carbon Fiber Hood (absolute trash quality and customer service ) / Heritage Grille / 5% Windows / 30% Windshield tint with 5% visor strip / Tinted Exterior Lights / Streetfighter LA Spoiler / Morimoto XB LED fogs / LED sidemarkers / Airaid CAI / Hurst Short Throw / TSP LT's / No cats / No resonator / Corsa Xtreme Catback / Trifecta Tune / Factory amp replaced / 2 JL Audio 12's in the trunk / MRR 228 Wheels / BMR Springs / Moog Endlinks / R1 Concepts Rotors & Pads |
06-08-2021, 10:22 AM | #9 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
That engine is substantially farther back than it should be. Look at that front subframe. Also, the radiator is nearly pressing against the throttle body, which itself looks fairly far back. It looks as if half the engine is under the cowl now.
That poor car.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
06-08-2021, 10:48 AM | #10 |
YouTube-Car Nation Videos
Drives: 2010 Chevrolet Camaro Join Date: Nov 2019
Location: Florida
Posts: 246
|
No it’s not salvageable. That engine is toast. I wouldn’t waste my time. Walk away.
|
06-08-2021, 11:01 AM | #11 |
Drives: LT W/2LT,blue metallic Join Date: Jul 2016
Location: central florida
Posts: 4,915
|
somebodys gotta say it...thatll buff right out...
|
06-08-2021, 12:26 PM | #12 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,529
|
I hit that with the Adams correcting polish for about 7 hours and it came out.
|
06-08-2021, 12:28 PM | #13 |
Drives: 15 Camaro SS Join Date: Oct 2018
Location: Mountains of central PA
Posts: 1,442
|
LOL
__________________
15 Camaro SS- GPI max top end, ESS Vortech V3 9psi, ID 1050s, ZL1 pump, JMS bap, Long tubes, Corsa extreme, Circle D pro 5C, 391 rear, DSS carbon drive shaft, poly cradle bushings, tuned by Ted Jannetty and much much more
|
06-08-2021, 01:27 PM | #14 |
Drives: 2011 SS Join Date: Jun 2021
Location: Lee's Summit, MO
Posts: 2
|
Ok, I'll keep looking. Thank you for all of the responses.
|
|
|
|
|