ORACLE Lighting has a surprise for you! >>>Video Inside<<<

[moyn]

So, I bought the side markers for Xmas, and I'm going to wire them up to my turn signals using the DIC... My question is, if I wire up the Halo as well with the side markers will they work correctly and also blink with the turn signals then? Might look pretty cool, so I'm thinking of giving it a try.... thoughts??

[Camaro Dude]

Originally Posted by UF4LIFE102SS

https://www.automotivelightstore.com...n%20Form99.pdf

Dude I just re-read that application form in that link you provided at the Oracle store, and it writes an additional $199 for installation????

If that's the case, DIY it is!

Originally Posted by moyn

So, I bought the side markers for Xmas, and I'm going to wire them up to my turn signals using the DIC... My question is, if I wire up the Halo as well with the side markers will they work correctly and also blink with the turn signals then? Might look pretty cool, so I'm thinking of giving it a try.... thoughts??

I personally think that will be overkill....to have your FRONT turn signals going on and off along with the halo's AND your side markers. Although I must admit, in light of the fact that you chose amber coloured halos, you might be onto something here...for sure everyone will notice your intentions to turn and it will be safe.

FWIW, I have the Oracle side markers on mine, but haven't even wired them up to flash with the turn signals because I fear EVEN THAT is a bit too much, but perhaps I'm in the minority here?

Sorry I didn't answer the technical side of your question but I'm sure others will.

[Crazyhorse6901]

Originally Posted by Ivan @ Southwest Speed

Pricing is the same as the LEDs for us......currently there are only single colors.

No colorshift option as of yet.

Here to help and answer questions if needed!
Ivan

Ivan,
PM price and will this be plug and play?

[moyn]

Originally Posted by AACstyle

It would work for SMD halos but not the Plasmas.

ahhhh... booo, ok, thanks for the info. glad i know before i try it and then start pulling my hair out trying to figure out why it's not working correctly lol

[moyn]

Originally Posted by Crazyhorse6901

Ivan,
PM price and will this be plug and play?

They aren't exactly plug & play... i mean you'll have to install them inside your headlight for starters. but as far as the wiring goes it's pretty straight forward. i just spliced mine into the Parking lights. and then i turn my light switch to Parking lights during the day, auto at night. obviosuly the Halo's are on all the time for tho. but i'm ok with that

you could run them to a dedicated switch and have complete control over the halo's if you wanted. Halo's just come with about 5-6' of wire, so you can run them to where ever you want. parking lights was the easiest, IMO

[Ivan @ Southwest Speed]

Originally Posted by moyn

They aren't exactly plug & play... i mean you'll have to install them inside your headlight for starters. but as far as the wiring goes it's pretty straight forward. i just spliced mine into the Parking lights. and then i turn my light switch to Parking lights during the day, auto at night. obviosuly the Halo's are on all the time for tho. but i'm ok with that

you could run them to a dedicated switch and have complete control over the halo's if you wanted. Halo's just come with about 5-6' of wire, so you can run them to where ever you want. parking lights was the easiest, IMO

Correct. There is some labor involved and part of why Oracle (and ourselves even) charge what we do for the work.

Check out some of the pics on our Facebook page. We did another set on Thursday and they came out really nice!

https://www.facebook.com/southwestspeed


Somebody at the shop even did a timelapse and posted up a little video of the install they did.



Enjoy and let us know if you have questions....this is what we do.

Ivan @ Southwest Speed

[Camaro Dude]

Originally Posted by JDP Motorsports

Very Nice!! These are sick!! We're proud to offer and use Oracle products!!!

Kind regards,

Jordan Priestley
888.308.6007

Jordan, I'm a happy client thus far, with the side markers and mirrors, I'll PM you in a couple of min on the plasma front halos.

Thx!

[moyn]

Originally Posted by AACstyle

It would work for SMD halos but not the Plasmas.

i was just thinking... if i did try this with Plasma would they just turn off and blink, instead of a Dual intensity? I'd be ok with the Halo going completely out (blink on and off, instead of just dimming) while the Turn Signal and the Side marker would go Dual intensity.... has anyone tried that before?

[DWALEX]

let me share my ORACLE Plasma halos installed. AWESOME!!!!!
thanks Jonathan

[Support@OracleLights.com]

Originally Posted by DWALEX

let me share my ORACLE Plasma halos installed. AWESOME!!!!!
thanks Jonathan
Attachment 599284

Looks great! Thanks for sharing!

[Brandonmos]

Can you pm the logistics of sending my stock RS lights out to you to be changed out to these? I'd like the brighter halos and cooler shift my oem ones if that makes sense