[Firecaptain]

@EDFHOBBIES Now that would be AWESOME on an interior piece like a console or door panel......

[EDFHOBBIES]

Originally Posted by SHE'Z 18

So, how much are you charging to do ours?!? ��. They look awesome!!

350.00 that covers the shipping back, labor, and materials plus you need to send me the mirrors. I would say 2 week turnaround. I have to wait 4 hours for the epoxy to tack before i can lay the carbon, then its 24 hours for the 1st cure. a good 3 to 4 hours to sand each mirror, then i have to reapplying resin 3 more times with 3 to 4 hours of dry time between each coat. Another 24 hours to dry after final coat, then the final sanding takes 3 or 4 hours for each mirror and cutting the excess material off, Clean, prep and applying the UV clear another day.

[EDFHOBBIES]

Originally Posted by Firecaptain

@EDFHOBBIES Now that would be AWESOME on an interior piece like a console or door panel......

yes.. 100% of my console are replacement parts(pull off the oem part remove oem clips install oem clips on carbon and reattach.) I need to do main section now or I was thinking to paint red since there is all ready red stich and belts.

The console was to complex just like the mirrors to make a replacement part for. here a my interior with red photoshop.

[pauly1119]

Looks good!

[clg82]

Subscribed….you’ll be getting a pm soon

[Hoov7472]

The absolute best feature of your work is that I could tell this was real CF right away. The lines in the fiber flow with the contours very nicely. Not like the printed stuff that is all straight and square to the part. Nice work!

[AZ_ZL1]

Well done EDF it looks great!

[EDFHOBBIES]

Thank you I just bought some more material and supplies. I'm gonna pull off my mirrors and make another set.

[SHE'Z 18]

Originally Posted by EDFHOBBIES

Thank you I just bought some more material and supplies. I'm gonna pull off my mirrors and make another set.

Keep up the great work and keep the pics coming!!! Are ya gonna do your shark fin as well?

[Ron_Robinson1]

You want a extra set of ZL1 mirrors to have at the ready?

I need that hood insert you made to clean up my hole cut out.

Anyways awesome product Jack.

[EDFHOBBIES]

Originally Posted by Ron_Robinson1

You want a extra set of ZL1 mirrors to have at the ready?

I need that hood insert you made to clean up my hole cut out.

Anyways awesome product Jack.

I'm going to make the insert this weekend just try a wet lay up. If all goes well I invest into a expensive vacuum machine.

[infinitereality]

That came out great, very good job laying the fabric down straight on the contours!

I've had good luck with carbon, contours and Gorillia spray adhesive and it staying laid down.

Before you invest in a good vacuum setup, if you have a food vacuum sealer you should definitely give that a shot first since it's free/cheap. Should be about the right size to skin a mirror too. I have tried using a pneumatic vacuum, vacuum sealer and just gravity to skin carbon. I find the vacuum sealer works about as good as the pneumatic vacuum, even better it seals the bag and easier to use. No doubt a real vacuum setup is the way to go and I eventually plan to, but it's truly hard to beat the food vacuum sealer

[Phil zl1]

Those mirrors look really great. Really nice job.

[EDFHOBBIES]

Got 1 installed today.. The time just flies by it seems when you near 50. I can't seem to get all what I need to get done in a day even waking up at 415am and going to bed at 9. Anyhow here is on installed..