10-18-2022, 02:30 PM | #1 |
Drives: 2010 2SS Join Date: Sep 2021
Location: Bozeman Montana
Posts: 38
|
Outdoor Car Cover
Anyone have personal experience with a good outdoor cover brand? I live in Montana so it'll see some snow and wind until our home remodel is done and I get my garage back. Mainly looking for something to protect the paint and interior from UV and not scratch the paint. Hopefully something that fits well and doesn't flop around.
I will ensure the car is clean and the cover is clean before I put it on, but it may stay on the car for a month or two. It wont be driven until the snow and salt are gone. I have a cheap set of tires that go on in winter on the stock wheels. |
10-18-2022, 05:25 PM | #2 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,442
|
Here is what I have covering my baby. Had it for about 5 years now and it has been through many, many bad thunderstorms and winds, not to mention several bad hurricanes. Fits like a glove and is soft on the underside, and has grommets on the sides so you can secure it tight with a piece of thin rope.
https://www.rickscamaros.com/camaro-...-335488-1.html
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
10-18-2022, 06:00 PM | #3 |
https://www.amazon.com/Gust-Strap-Co.../dp/B007W6X7C8 Had real good luck with this and the linked tie downs. With a locking cable under the center Doesn’t move at all Car looks just as clean as it did when I covered it Sent from my iPhone using Tapatalk
__________________
BBK Long tube headers, Hi flo cats, straight pipe muffler delete with j-pipes. K+N CAI, Soler Performance Ported Throttle Body, Soler Performance Throttle Controller, Phantom Grill, MGW flatstick shifter. 3.91 Gears, Ported Rod Mod Intake, ZTA Spoiler, Rohana RC22 20x10 20x11.
|
|
10-18-2022, 10:40 PM | #4 |
Cyber/orange10
|
We used California Car Cover superweave on our Corvette for ten yrs in chicago area with no problems, just added a couple tie downs for the wind was great.
Last edited by Cyber/Orange10; 10-20-2022 at 10:47 PM. |
10-20-2022, 07:33 PM | #5 |
Drives: 2010 2SS Join Date: Sep 2021
Location: Bozeman Montana
Posts: 38
|
Thank you for the suggestions. i will check them out.
|
10-21-2022, 03:44 PM | #6 |
Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012
Location: Southeast, PA
Posts: 2,093
|
Covercraft NOAH fabric is the cover I use on all of my vehicles
__________________
LS3 Crate Engine Swap | CSP Custom Cam 232/240 .615/.615 113 +3 | Stainless Power LT Headers | Z28 Intake | Borla S-Type Exhaust | FTI Triple-Disc Billet 3200 Stall
2012 Camaro 2SS/RS | 1968 Camaro SS | 2020 Cadillac CT5 Premium Luxury | 2021 Spark LS |
11-02-2022, 06:58 AM | #7 | |
Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020
Location: Austin, TX
Posts: 2,109
|
Quote:
__________________
DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
|
11-05-2022, 11:14 AM | #8 | |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,442
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
11-09-2022, 12:56 AM | #9 |
Drives: Supercharged 2013 AGM 2SS/RS Join Date: Oct 2013
Location: Los Angeles, CA
Posts: 786
|
Personally, I think when covering a car outdoors you are bound to get some light marring on the paint when the wind blows. Might be the lesser of two evils in your situation, but I wouldn’t expect it to be perfect paint under there. I covered my car outdoors for a while, and used cords to tie the cover down, but inevitably dust or dirt blows under the car and gets in between the paint and the cover, and when the wind blows and the cover flaps it makes little swirl marks in the paint. Maybe you won’t notice or mind little stuff like that, but I stopped using the cover afterwards.
__________________
2013 AGM 2SS/RS
SLP TVS2300, Edge CAI, 3" Magnaflow catback, BC Racing BR series coilovers, HRE FF15's (20x10 square) with Michelin Pilot Sport 4S's, GM STB, BMR front and rear sway bars and toe links, Prothane subframe bushings and front control arm inserts, JDP rear upper control arm bushings, Elite Engineering catch can. Tuned by Cunningham Motorsports. 1967 Bolero Red 396 SS/RS Convertible |
11-15-2022, 02:22 AM | #10 | |
Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020
Location: Austin, TX
Posts: 2,109
|
Quote:
__________________
DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
|
|
|
|
|