All C7 Corvette order status requests & list of status codes - Page 44

laborsmith · 07-29-2013, 04:51 PM

Quote:

Originally Posted by rexmurph

So could this mean that GM might now begin to schedule production on those orders in the system based on the actual order date? After all, all the orders are dealer allocated but now when you actually placed your order means something!

Since when?

Labrosmith

Hancock · 07-29-2013, 04:53 PM

Quote:

Originally Posted by Rayo

This is my order page from Kerbeck, but still no order number

Can someone show him what the GM Workbench order page looks like. He hasn't gotten it yet from Kerbeck. Shouldn't he get the order page after he puts down the deposit?

Rayo, no way it's because you "didnt make the cut" Kerbeck has something like 350 initial allocation. If you are number 158, then you should be golden. Unless you ordered a convertible or something, that's still on "hold" I believe.

laborsmith · 07-29-2013, 05:13 PM

Not all dealers will give you a copy of the order workbench but will give you the order number if you ask, per my experience.

Kerbeck got over 500 allocations.

To explain my "since when" post above, retail orders are automatically priority 1, it is when allocation is matched against orders that a question of priority might arise. Wise dealers make a point of queuing in order received, but this is not a requirement nor is it normally a problem. Most vehicle lines will not start with a long line of pre-orders and I suspect but do not know that many vehicles lines start with less than a hundred. The Stingray is the exception that proves the rule and could very well have three or four thousand pre-orders at the start.

Laborsmith

BRCC · 07-29-2013, 05:41 PM

Quote:

Originally Posted by GQ4Life

No new orders?
I'm at 3300 :-(

Did you check today?? I understand all are back to 3000.

illiceman · 07-29-2013, 08:10 PM

I am not sure but I am at 3300 and I don,t expect any movement until the factory goes back to work.

GQ4Life · 07-29-2013, 08:17 PM

Quote:

Originally Posted by BRCC

Did you check today?? I understand all are back to 3000.

nah i havent check again since I went to 3300.. didnt see point since it is not moving till they start making them and i will hear about that.. I only check then to make sure my order went thru ok and with everyone else no freezes

GQ4Life · 07-29-2013, 08:18 PM

Quote:

Originally Posted by illiceman

I am not sure but I am at 3300 and I don,t expect any movement until the factory goes back to work.

tell those lazy f*%ks to get back to work j/k

laborsmith · 07-29-2013, 08:39 PM

Um, I believe those "lazy" persons have been back and are working. If the first regular production Stingray rolls off the line this coming Monday morning, it will have started ither today or tomorrow as it takes about 22 hours (ie: three day shifts) to go from paint to rolling off at the end of Final Trim. (Estimated time based on what is normal these days.)

3400s should start popping up Wednesday or Thursday if regular production starts August 5. I do not know that it will, and will not know until August 6.

Laborsmith

GQ4Life · 07-29-2013, 09:23 PM

Quote:

Originally Posted by laborsmith

Um, I believe those "lazy" persons have been back and are working. If the first regular production Stingray rolls off the line this coming Monday morning, it will have started ither today or tomorrow as it takes about 22 hours (ie: three day shifts) to go from paint to rolling off at the end of Final Trim. (Estimated time based on what is normal these days.)

3400s should start popping up Wednesday or Thursday if regular production starts August 5. I do not know that it will, and will not know until August 6.

Laborsmith

id bet that it will start monday first car rolls out tuesday i guess..
but any premiere get priority from what GM told media (well media said GM told them LOL)
they can roll out 150 a day about so shouldnt take long for some of us

350 HRSS · 07-30-2013, 08:56 AM

Quote:

Originally Posted by laborsmith

Um, I believe those "lazy" persons have been back and are working. If the first regular production Stingray rolls off the line this coming Monday morning, it will have started ither today or tomorrow as it takes about 22 hours (ie: three day shifts) to go from paint to rolling off at the end of Final Trim. (Estimated time based on what is normal these days.)

3400s should start popping up Wednesday or Thursday if regular production starts August 5. I do not know that it will, and will not know until August 6.

Laborsmith

This gets better and better everyday. The message above fits exactly to what I have been told in the emails I have received. I am going with laborsmith. I also hope to see my event code go back to normal soon. I am just thrilled knowing I have completed all my NCM paperwork.

Drake Heminger · 07-30-2013, 09:49 AM

Quote:

Originally Posted by 350 HRSS

This gets better and better everyday. The message above fits exactly to what I have been told in the emails I have received. I am going with laborsmith. I also hope to see my event code go back to normal soon. I am just thrilled knowing I have completed all my NCM paperwork.

Laborsmith is the man!

Nicky Pass · 07-30-2013, 11:58 AM

Becky, can I get an update on RBKSX0?

3000 status well over a month now. It's strange to see that other guy posted people higher then 3000.

Thanks!

JoeP@TeamBeckyD · 07-30-2013, 12:57 PM

Quote:

Originally Posted by Hancock

Becky if you could check RDFVRQ again. I know it hasn't been too long, but from what I have seen 2500 statuses don't last long, and I'd love to be in the 3000 club. Thanks a lot for your time, and for keeping us all giddy!

3000 status

Congrats!!

JoeP@TeamBeckyD · 07-30-2013, 01:02 PM

Quote:

Originally Posted by Nicky Pass

Becky, can I get an update on RBKSX0?

3000 status well over a month now. It's strange to see that other guy posted people higher then 3000.

Thanks!

3000 status -

you might want to read backwards in this thread -
all good info!!

07-29-2013, 05:13 PM	#605
laborsmith Drives: 1969 Corvair, 2018 Camaro T4 RS Join Date: Mar 2009 Location: Detroit Metropolitan Area Posts: 2,881	Not all dealers will give you a copy of the order workbench but will give you the order number if you ask, per my experience. Kerbeck got over 500 allocations. To explain my "since when" post above, retail orders are automatically priority 1, it is when allocation is matched against orders that a question of priority might arise. Wise dealers make a point of queuing in order received, but this is not a requirement nor is it normally a problem. Most vehicle lines will not start with a long line of pre-orders and I suspect but do not know that many vehicles lines start with less than a hundred. The Stingray is the exception that proves the rule and could very well have three or four thousand pre-orders at the start. Laborsmith

07-29-2013, 08:10 PM	#607
illiceman Drives: 2012 ZL 1 Join Date: Sep 2010 Location: LAKE OZARK,MO. Posts: 156	I am not sure but I am at 3300 and I don,t expect any movement until the factory goes back to work.

07-29-2013, 08:39 PM	#610
laborsmith Drives: 1969 Corvair, 2018 Camaro T4 RS Join Date: Mar 2009 Location: Detroit Metropolitan Area Posts: 2,881	Um, I believe those "lazy" persons have been back and are working. If the first regular production Stingray rolls off the line this coming Monday morning, it will have started ither today or tomorrow as it takes about 22 hours (ie: three day shifts) to go from paint to rolling off at the end of Final Trim. (Estimated time based on what is normal these days.) 3400s should start popping up Wednesday or Thursday if regular production starts August 5. I do not know that it will, and will not know until August 6. Laborsmith

07-30-2013, 11:58 AM	#614
Nicky Pass Drives: 2014 BRM, 2SS, RS, 1LE Join Date: Jun 2013 Location: Chicago Posts: 144	Becky, can I get an update on RBKSX0? 3000 status well over a month now. It's strange to see that other guy posted people higher then 3000. Thanks!