Review: 3D Towel Kleen

[ec1990]

Wow does 3D have a quick turn around, in 3 days I had already received this. Perfect as I had just finished up light polishing the Camaro after noticing a few scratches that were my fault for being a bit too aggressive on a waterless wash. Well I decided to throw this product at the wheel towels to see what it could do.

Now first off up to this point I have been using dye free scent free detergent that isn't made for microfibers specifically, I have been meaning to get some but overall it has been working fine and I've see no negative effects with it. But I will say none that I've used have cleaned as well as this has.

First off, packaging.





Overall pretty standard gallon jug. But the price is very reasonable $16 for 1 gallon and in a wash you use roughly 2 oz. So 64 washes for $16 or $0.25 per wash, not too bad. No complaints about the packaging although it would be nice if the cap could be used to measure, some other companies provide a dual spout container for you to measure. I don't know if that would work with a gallon container but a simple cap with hashed lines like clothes detergent would be helpful.

Now onto the towels, brace yourselves....





I told you I didn't take it easy. These were full of wiping down brake dusted wheels and I really wanted to give a kind of worst case scenario to Towel Kleen.

Here are the results





Overall a gigantic improvement, note these towels were placed in the wash the same afternoon they were used, no sitting around, no soaking in a bucket of water and APC which I'll do if they'll be sitting a few days. But this product worked great. I didn't expect a 100% improvement on that first towel, it was covered in oxidation, brake dust, dirt, grime, you name it it has it. The second one is darn near clean as can be. The towels did regain fluff as well so no drying out with this product.

I would have no problem recommending this product, it's a great value and does what it's supposed to. I'll be using this from now on.

[LIM3]

Great review !

[DARK AGE 53]

From what I see it's $15.99 for the product and $11.33 for shipping, too bad amazon doesn't carry it.

[ec1990]

Originally Posted by DARK AGE 53

From what I see it's $15.99 for the product and $11.33 for shipping, too bad amazon doesn't carry it.

You can also check if there is a store close by? Fortunately I have one near me.

[LIM3]

Originally Posted by ec1990

You can also check if there is a store close by? Fortunately I have one near me.

I'm lucky enough to have one somewhat close by.
Less than an hour.

[DARK AGE 53]

Are this nation wide stores that carry it?

[CamaroDreams07]

Originally Posted by DARK AGE 53

Are this nation wide stores that carry it?

One each in Arkansas, Florida and Pennsylvania off the top of my head. I'd hardly call it a nationwide chain.

[ec1990]

Originally Posted by CamaroDreams07

One each in Arkansas, Florida and Pennsylvania off the top of my head. I'd hardly call it a nationwide chain.

There's about 20-30 stores that either are 3D stores or partnered with them as a retailer. Most are west coast based I have 2 here in Vegas.

Here's the link 3D product locations

[CamaroDreams07]

Originally Posted by ec1990

There's about 20-30 stores that either are 3D stores or partnered with them as a retailer. Most are west coast based I have 2 here in Vegas.

Here's the link 3D product locations

Well considering he's in MI and AL, I figured I could leave out the west coast Lol.

[ec1990]

Originally Posted by CamaroDreams07

Well considering he's in MI and AL, I figured I could leave out the west coast Lol.

Haha very true. And since the east coast is better.

[DARK AGE 53]

There's one in Florida but that's 700 miles away from Alabama, well at least we have grits in Alabama.....I'll just stick to what I'm using now.