11-11-2013, 10:51 PM | #1 |
Drives: 2010 RS/SS Join Date: Jul 2009
Location: USA
Posts: 3,442
|
Fuel Rail and Plenum Cover Removal
We have had quite a few of our customers request instructions for removing the fuel rail covers and plenum cover after purchasing our smoothie versions. Here is a quick session on how to do so.
Plenum Cover http://showstopperaccessories.com/pr...num-Cover.html Fuel Rail Covers http://showstopperaccessories.com/pr...il-Covers.html The fuel rail covers are just snapped in place using a rubber grommet style fastener. Start of by lifting upward more towards the plenum side and they will unsnap without using too much force. Then, once you remove the fuel rail you will notice a wiring harness that is fastened to the plenum cover. They are just zip ties that are snapped into the plenum. So if you wiggle the zip tie upward, it should slowly come out. Sometimes a tool is needed to get this started. This is what it should look like once removed. The next step is to remove a total of four 10mm bolts that hold the plenum in place. These also have a nipple at the top in which your fuel rails snapped into. Lastly, there is one wiring connector that will need to be disconnected in order to lift the plenum off. Once this is done, you are ready to lift the plenum off. Reverse the steps to re install everything. If you have any questions, feel free to pm me. |
11-12-2013, 09:57 AM | #2 |
Da WHALE
Drives: 2014 Stingray, 2015 Panamera 4 Join Date: Dec 2011
Location: Oceanside, Ca - Originally from KCMO
Posts: 8,878
|
I was wondering how to get this thing off.
__________________
Project MantaRay...Underway
|
11-12-2013, 10:12 AM | #3 |
just can't get enough
|
Thanks, showstopper! Quite simple after all.
|
11-14-2013, 07:43 PM | #4 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
great instructions - I was able to change my plenum 15 min - two things - a panel popper (see amazon) makes the harness detach easier, and it takes a deep 10mm socket to get off the plenum bolts....
gloss rails next week.
__________________
Last edited by Glen e; 11-15-2013 at 09:30 AM. |
11-19-2013, 05:26 PM | #5 |
by Odeon
Drives: '12 SS/RS A6 IOM SOLD, '13 1LE IOM Join Date: Nov 2011
Location: Good question
Posts: 1,707
|
That fuel rail and plenum cover is the first thing I do when I get mine. Looks absolutely outstanding.
__________________
"It works 60% of the time, every time."
"Some say it's a waste of time, others say it's an incredible waste of time." "The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy." 2013 IOM SS/RS - 1LE. Born 5/6/2013 (1 of 32 1SS IOM 1LE's) |
11-19-2013, 08:25 PM | #6 |
Drives: 2010 RS/SS Join Date: Jul 2009
Location: USA
Posts: 3,442
|
|
11-23-2013, 02:41 PM | #7 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
|
01-26-2014, 10:45 PM | #8 |
Drives: 2014 Z51 Lime Rock Green Join Date: Jan 2014
Location: New England
Posts: 148
|
Thanks for the post. Now I know how easy it will be to remove the covers. This is gonna cost me money.
|
06-15-2014, 09:56 AM | #9 |
Drives: 2014 Corvette Join Date: Apr 2014
Location: NY
Posts: 1
|
Does anyone know exactly how to remove the wiring harness? I have everything apart but I just can't seem to figure out the locking mechanism.
|
|
|
|
|