What did you do to your 6th Gen Camaro today?! - Page 612

Aaron07 · 07-02-2020, 11:57 AM

Cleaned and conditioned the interior. Mothers VLR is good product as is Turtle Wax dash and glass.

TMD29 · 07-02-2020, 05:54 PM

Had to give it a bath. This is after 6 beers in.

mjoneil · 07-02-2020, 07:29 PM

New tails installed! also got new headlights but they're tough to capture on the iphone.

Altered Carbon · 07-02-2020, 08:17 PM

Quote:

Originally Posted by mjoneil

New tails installed! also got new headlights but they're tough to capture on the iphone.

First time I've ever seen those. Pretty neat. They kind of play off of the wheels.

UnknownJinX · 07-02-2020, 08:47 PM

Had a local shop install the black fender badges for me. Look a lot better than stock and they go better with black accents of the car.

Martinjlm · 07-02-2020, 09:36 PM

Quote:

Originally Posted by TMD29

Had to give it a bath. This is after 6 beers in.

So what you’re saying is when you started, it was white?

Hekate1 · 07-02-2020, 09:37 PM

Bath day!

TMD29 · 07-02-2020, 09:56 PM

Quote:

Originally Posted by Martinjlm

So what you’re saying is when you started, it was white?

Lol, nope. It was delivered gray. I have proof.

arpad_m · 07-03-2020, 09:53 PM

Quote:

Originally Posted by ST1LE

That will make it tough haha. I see what you're talking about now that I look back on your picture, and it's very nice what you did. I suppose maybe a level to set the tape line and a ruler for spacing then, or as you did, have a pro do it.

Quote:

Originally Posted by 17rsvert

A level won't work well, the emblems need to follow the contour of the creases in the fender. When I was putting mine on I placed them with blue painter's tape using a level (I did check that the car was on level ground first.) When level, they looked slanted, so I repositioned them to follow the contours. Took a few tries repositioning them, standing back to check before it looked right.

The GM kit comes with the letters properly spaced out and attached to a secondary backing sheet, plus a vinyl template to be taped to the front fender. Installation is a breeze.

UnknownJinX · 07-03-2020, 11:26 PM

Yeah I paid someone to do it. The same shop did my PPF and was gonna fix some imperfections anyway.

Don't have a heat gun handy to take the old emblems off, and I don't really trust myself with this kind of bodywork.

z28pat · 07-04-2020, 09:28 AM

Quote:

Originally Posted by UnknownJinX

Yeah I paid someone to do it. The same shop did my PPF and was gonna fix some imperfections anyway.

Don't have a heat gun handy to take the old emblems off, and I don't really trust myself with this kind of bodywork.

I did the same emblem on mine , used the wife’s hair dryer for a heat gun and love the way they look on the car. It’s always bothered me how small the name camaro was on the car.

arpad_m · 07-04-2020, 02:25 PM

Installed the upgraded GM wireless charging module, a very easy job thanks to guys who already shared this on youtube.

The car is now ready for all new phones, yay (the slight trimming I applied to the rubber stoppers along the short pad edge will allow much longer phones to fit).

caSStro18 · 07-04-2020, 02:31 PM

Quote:

Originally Posted by arpad_m

Installed the upgraded GM wireless charging module, a very easy job thanks to guys who already shared this on youtube.

The car is now ready for all new phones, yay (the slight trimming I applied to the rubber stoppers along the short pad edge will allow much longer phones to fit).

But you have the 2SS. Didn't your car already have wireless charging?

arpad_m · 07-04-2020, 03:42 PM

Quote:

Originally Posted by caSStro18

But you have the 2SS. Didn't your car already have wireless charging?

There is an upgraded charging module that has higher output and supports 2017+ phones such as iphone 10+ or samsung galaxy s8/9+ etc. At $75 and with DIY install it's worth the minimal hassle.

I know many diss the wireless charging solution on the Camaro, but I find it convenient and use it all the time.

07-02-2020, 11:57 AM	#8555
Aaron07 Drives: 2017 2SS F1FTY Join Date: Feb 2020 Location: Fort Wayne, IN Posts: 348	Cleaned and conditioned the interior. Mothers VLR is good product as is Turtle Wax dash and glass. Attached Images

07-02-2020, 05:54 PM	#8556
TMD29 Drives: 19' ZL1, BMW F80 M3 Join Date: Jun 2016 Location: OH Posts: 24	Had to give it a bath. This is after 6 beers in. Attached Images

07-02-2020, 08:47 PM	#8559
UnknownJinX Drives: 19 Chevrolet Camaro 2SS 1LE Shock Join Date: Apr 2020 Location: BC, Canada Posts: 1,947	Had a local shop install the black fender badges for me. Look a lot better than stock and they go better with black accents of the car. Attached Images __________________ Current: 2019 Chevrolet Camaro 2SS 1LE M6 Shock GM Performance Intake and that's it, because driver mods before car mods Past: 2009 Mazda RX-8 GT M6 Velocity Red Mica (Sold) 2015 Chevrolet Corvette Z51 2LT M7 Velocity Yellow Tintcoat (Flood totaled)

07-02-2020, 09:37 PM	#8561
Hekate1 Drives: 2020 2SS 1LE Join Date: Apr 2016 Location: Central Texas Posts: 227	Bath day! Attached Images

07-03-2020, 11:26 PM	#8564
UnknownJinX Drives: 19 Chevrolet Camaro 2SS 1LE Shock Join Date: Apr 2020 Location: BC, Canada Posts: 1,947	Yeah I paid someone to do it. The same shop did my PPF and was gonna fix some imperfections anyway. Don't have a heat gun handy to take the old emblems off, and I don't really trust myself with this kind of bodywork. __________________ Current: 2019 Chevrolet Camaro 2SS 1LE M6 Shock GM Performance Intake and that's it, because driver mods before car mods Past: 2009 Mazda RX-8 GT M6 Velocity Red Mica (Sold) 2015 Chevrolet Corvette Z51 2LT M7 Velocity Yellow Tintcoat (Flood totaled)

07-02-2020, 07:29 PM	#8557
mjoneil Drives: '17 2SS Join Date: Aug 2018 Location: MA Posts: 81	New tails installed! also got new headlights but they're tough to capture on the iphone.

07-04-2020, 02:25 PM	#8566
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,616 View My Garage	Installed the upgraded GM wireless charging module, a very easy job thanks to guys who already shared this on youtube. The car is now ready for all new phones, yay (the slight trimming I applied to the rubber stoppers along the short pad edge will allow much longer phones to fit). Attached Images __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

User Name		Remember Me?
Password