Carbon Fiber Rear Diffuser/Valence by Lashway Motorsports - NOW AVAILABLE!

Erik@lashway · 12-23-2013, 10:47 AM

I know everyone has been waiting for this, and it's finally here. This item pictures is the first item made, and does have some slight imperfections, though they are minor. The final parts will look and fit just like this, but will be free of any imperfections.

The item is a direct bolt in, and requires only basic hand tools and about an hour or two of labor one can do at his/her home (should you choose to).

Pricing is below:

Lashway Motorsports C7 Rear Valence, Carbon Fiber (with customer core returned) - $1399.99 plus S&H

Without Core Valence: Add $500 to price

Tech Info:

This part is the factory rear lower valence that we than have 100% REAL Carbon Fiber added to - or laminated as we call it. Parts are laminated locally by G3 Carbon, LLC (as are our other parts available). They are direct bolt on, and require no modification to the rear bumper. Part will come with detailed instructions as well!

Erik@lashway · 12-26-2013, 05:40 PM

For those requesting diffuser "blades" , here you go.

We had these blades made in addition to the diffuser to get the basic look. We installed these on a diffuser (using 3m tape), and are going to get feedback. If people out there like the look, we can then offer a rear diffuser with 4 blades "bonded" into the part - so they'll be part of the rear diffuser.

What do you think?

mbrusco103 · 01-11-2014, 07:56 AM

That looks awesome!!

Sent from my Nexus 7 using Tapatalk

bnall40 · 01-11-2014, 09:26 AM

Maybe a dumb question, but, aside from the "great looks", what is the purpose of the diffuser?

1FASTC7 · 01-12-2014, 11:37 AM

Is the carbon fiber just laminated over the old part? Therefore, these are not 100% carbon fiber pieces?

Erik@lashway · 01-14-2014, 07:13 AM

Quote:

Originally Posted by bnall40

Maybe a dumb question, but, aside from the "great looks", what is the purpose of the diffuser?

Looks. In racing, diffusers help to smooth the air flow which is going past the rear of the vehicle which helps handling and high speed maneuvering.

Quote:

Originally Posted by 1FASTC7

Is the carbon fiber just laminated over the old part? Therefore, these are not 100% carbon fiber pieces?

That is correct. Real Carbon laminated over the stock valence.

Erik@lashway · 01-14-2014, 07:13 AM

Hey guys, check out our short HOW TO/PROMOTIONAL video we put together last week. This shows how easy it is to install these parts. Parts featured in video are the CARBON FLASH METALLIC pieces...

Erik@Lashway

12-23-2013, 10:47 AM	#1
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Carbon Fiber Rear Diffuser/Valence by Lashway Motorsports - NOW AVAILABLE! I know everyone has been waiting for this, and it's finally here. This item pictures is the first item made, and does have some slight imperfections, though they are minor. The final parts will look and fit just like this, but will be free of any imperfections. The item is a direct bolt in, and requires only basic hand tools and about an hour or two of labor one can do at his/her home (should you choose to). Pricing is below: Lashway Motorsports C7 Rear Valence, Carbon Fiber (with customer core returned) - $1399.99 plus S&H Without Core Valence: Add $500 to price Tech Info: This part is the factory rear lower valence that we than have 100% REAL Carbon Fiber added to - or laminated as we call it. Parts are laminated locally by G3 Carbon, LLC (as are our other parts available). They are direct bolt on, and require no modification to the rear bumper. Part will come with detailed instructions as well! Last edited by Erik@lashway; 12-23-2013 at 05:13 PM.

01-11-2014, 07:56 AM	#3
mbrusco103 Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008 Location: NJ Posts: 1,090 View My Garage	That looks awesome!! Sent from my Nexus 7 using Tapatalk __________________ 2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar \| ERL 427ci \| Squash Fuel System \| Stainless Works Chambered 3" \| Mcleod RXT \| Factory Hurst Short Throw \| Black Forgestar F14s \| CTS V 6 Piston Brembo \| VIS AMS Carbon Fiber Hood \| Anvil Carbon Fiber Spoiler

12-26-2013, 05:40 PM	#2
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	For those requesting diffuser "blades" , here you go. We had these blades made in addition to the diffuser to get the basic look. We installed these on a diffuser (using 3m tape), and are going to get feedback. If people out there like the look, we can then offer a rear diffuser with 4 blades "bonded" into the part - so they'll be part of the rear diffuser. What do you think?

01-11-2014, 09:26 AM	#4
bnall40 Drives: Z51 3LT, 2009 Pilot, 2012 Ody Tours Join Date: Sep 2013 Location: Muscle Shoals, AL Posts: 113	Maybe a dumb question, but, aside from the "great looks", what is the purpose of the diffuser?

01-12-2014, 11:37 AM	#5
1FASTC7 Drives: 2014 Corvette Stingray Join Date: Nov 2013 Location: Vacaville, CA Posts: 80	Is the carbon fiber just laminated over the old part? Therefore, these are not 100% carbon fiber pieces?